plcomvar.h revision 1.18
1 /* $NetBSD: plcomvar.h,v 1.18 2021/10/17 22:34:17 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Christopher G. Demetriou 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "opt_multiprocessor.h" 34 #include "opt_lockdebug.h" 35 #include "opt_plcom.h" 36 #include "opt_kgdb.h" 37 38 #ifdef RND_COM 39 #include <sys/rndsource.h> 40 #endif 41 42 #include <sys/callout.h> 43 #include <sys/timepps.h> 44 45 struct plcom_instance; 46 47 int plcomcnattach (struct plcom_instance *, int, int, tcflag_t, int); 48 void plcomcndetach (void); 49 50 #ifdef KGDB 51 int plcom_kgdb_attach (struct plcom_instance *, int, int, tcflag_t, int); 52 #endif 53 54 int plcom_is_console (bus_space_tag_t, bus_addr_t, bus_space_handle_t *); 55 56 /* Hardware flag masks */ 57 #define PLCOM_HW_NOIEN 0x01 58 #define PLCOM_HW_FIFO 0x02 59 #define PLCOM_HW_HAYESP 0x04 60 #define PLCOM_HW_FLOW 0x08 61 #define PLCOM_HW_DEV_OK 0x20 62 #define PLCOM_HW_CONSOLE 0x40 63 #define PLCOM_HW_KGDB 0x80 64 #define PLCOM_HW_TXFIFO_DISABLE 0x100 65 66 /* Buffer size for character buffer */ 67 #define PLCOM_RING_SIZE 2048 68 69 struct plcom_instance { 70 u_int pi_type; 71 #define PLCOM_TYPE_PL010 0 72 #define PLCOM_TYPE_PL011 1 73 74 uint32_t pi_flags; /* flags for this PLCOM */ 75 #define PLC_FLAG_USE_DMA 0x0001 76 #define PLC_FLAG_32BIT_ACCESS 0x0002 77 78 void *pi_cookie; 79 80 bus_space_tag_t pi_iot; 81 bus_space_handle_t pi_ioh; 82 bus_addr_t pi_iobase; 83 bus_addr_t pi_size; 84 struct plcom_registers *pi_regs; 85 }; 86 87 struct plcom_softc { 88 device_t sc_dev; 89 90 struct tty *sc_tty; 91 void *sc_si; 92 93 struct callout sc_diag_callout; 94 95 int sc_frequency; 96 97 struct plcom_instance sc_pi; 98 99 u_int sc_overflows, 100 sc_floods, 101 sc_errors; 102 103 int sc_hwflags, 104 sc_swflags; 105 u_int sc_fifolen; 106 107 struct timeval sc_hup_pending; 108 109 u_int sc_r_hiwat, 110 sc_r_lowat; 111 u_char *volatile sc_rbget, 112 *volatile sc_rbput; 113 volatile u_int sc_rbavail; 114 u_char *sc_rbuf, 115 *sc_ebuf; 116 117 u_char *sc_tba; 118 u_int sc_tbc, 119 sc_heldtbc; 120 121 volatile u_char sc_rx_flags, 122 #define RX_TTY_BLOCKED 0x01 123 #define RX_TTY_OVERFLOWED 0x02 124 #define RX_IBUF_BLOCKED 0x04 125 #define RX_IBUF_OVERFLOWED 0x08 126 #define RX_ANY_BLOCK 0x0f 127 sc_tx_busy, 128 sc_tx_done, 129 sc_tx_stopped, 130 sc_st_check, 131 sc_rx_ready; 132 133 volatile u_char sc_heldchange; 134 volatile u_int sc_cr, sc_ratel, sc_rateh, sc_imsc; 135 volatile u_int sc_msr, sc_msr_delta, sc_msr_mask; 136 volatile u_char sc_mcr, sc_mcr_active, sc_lcr; 137 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 138 u_int sc_fifo; 139 140 /* Support routine to program mcr lines for PL010, if present. */ 141 void (*sc_set_mcr)(void *, int, u_int); 142 void *sc_set_mcr_arg; 143 144 /* power management hooks */ 145 int (*enable) (struct plcom_softc *); 146 void (*disable) (struct plcom_softc *); 147 int enabled; 148 149 /* PPS signal on DCD, with or without inkernel clock disciplining */ 150 u_char sc_ppsmask; /* pps signal mask */ 151 u_char sc_ppsassert; /* pps leading edge */ 152 u_char sc_ppsclear; /* pps trailing edge */ 153 pps_info_t ppsinfo; 154 pps_params_t ppsparam; 155 156 #ifdef RND_COM 157 krndsource_t rnd_source; 158 #endif 159 kmutex_t sc_lock; 160 }; 161 162 #if 0 163 int plcomprobe1 (bus_space_tag_t, bus_space_handle_t); 164 #endif 165 int plcomintr (void *); 166 void plcom_attach_subr (struct plcom_softc *); 167 int plcom_detach (device_t, int); 168 int plcom_activate (device_t, enum devact); 169 170
Indexes created Thu Sep 25 16:09:42 GMT 2025