Home | History | Annotate | Line # | Download | only in gumstix
gxio.c revision 1.19
      1 /*	$NetBSD: gxio.c,v 1.19 2012/12/12 19:47:44 matt Exp $ */
      2 /*
      3  * Copyright (C) 2005, 2006, 2007 WIDE Project and SOUM Corporation.
      4  * All rights reserved.
      5  *
      6  * Written by Takashi Kiyohara and Susumu Miki for WIDE Project and SOUM
      7  * Corporation.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. Neither the name of the project nor the name of SOUM Corporation
     18  *    may be used to endorse or promote products derived from this software
     19  *    without specific prior written permission.
     20  *
     21  * THIS SOFTWARE IS PROVIDED BY THE PROJECT and SOUM CORPORATION ``AS IS''
     22  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT AND SOUM CORPORATION
     25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     31  * POSSIBILITY OF SUCH DAMAGE.
     32  */
     33 #include <sys/cdefs.h>
     34 __KERNEL_RCSID(0, "$NetBSD: gxio.c,v 1.19 2012/12/12 19:47:44 matt Exp $");
     35 
     36 #include "opt_cputypes.h"
     37 #include "opt_gumstix.h"
     38 #include "opt_gxio.h"
     39 #if defined(OVERO)
     40 #include "opt_omap.h"
     41 #endif
     42 
     43 #include <sys/param.h>
     44 #include <sys/device.h>
     45 #include <sys/errno.h>
     46 #include <sys/kernel.h>
     47 
     48 #include <sys/systm.h>
     49 
     50 #include <machine/bootconfig.h>
     51 
     52 #if defined(OVERO)
     53 #include <arm/omap/omap2_gpmcreg.h>
     54 #include <arm/omap/omap2_reg.h>
     55 #if defined(OMAP3530)
     56 #include <arm/omap/omap2_intr.h>
     57 #endif
     58 #include <arm/omap/omap_var.h>
     59 #endif
     60 #if defined(CPU_XSCALE_PXA270) || defined(CPU_XSCALE_PXA250)
     61 #include <arm/xscale/pxa2x0cpu.h>
     62 #endif
     63 #include <arm/xscale/pxa2x0reg.h>
     64 #include <arm/xscale/pxa2x0var.h>
     65 #include <arm/xscale/pxa2x0_gpio.h>
     66 #include <evbarm/gumstix/gumstixreg.h>
     67 #include <evbarm/gumstix/gumstixvar.h>
     68 
     69 #include "ioconf.h"
     70 #include "locators.h"
     71 
     72 
     73 struct gxioconf {
     74 	const char *name;
     75 	void (*config)(void);
     76 };
     77 
     78 #if defined(GUMSTIX)
     79 static int gxiomatch(device_t, cfdata_t, void *);
     80 static void gxioattach(device_t, device_t, void *);
     81 static int gxiosearch(device_t, cfdata_t, const int *, void *);
     82 static int gxioprint(void *, const char *);
     83 
     84 CFATTACH_DECL_NEW(gxio, sizeof(struct gxio_softc),
     85     gxiomatch, gxioattach, NULL, NULL);
     86 #endif
     87 
     88 void gxio_config_pin(void);
     89 void gxio_config_expansion(char *);
     90 static void gxio_config_gpio(const struct gxioconf *, char *);
     91 #if defined(GUMSTIX)
     92 static void basix_config(void);
     93 static void cfstix_config(void);
     94 static void etherstix_config(void);
     95 static void netcf_config(void);
     96 static void netcf_vx_config(void);
     97 static void netduommc_config(void);
     98 static void netduo_config(void);
     99 static void netmicrosd_config(void);
    100 static void netwifimicrosd_config(void);
    101 static void netmmc_config(void);
    102 static void wifistix_config(void);
    103 static void wifistix_cf_config(void);
    104 #elif defined(OVERO)
    105 static void eth0_config(void);
    106 static void eth1_config(void);
    107 static void chestnut_config(void);
    108 static void tobi_config(void);
    109 static void tobiduo_config(void);
    110 #endif
    111 
    112 #if defined(CPU_XSCALE_PXA250)
    113 static struct pxa2x0_gpioconf pxa255dep_gpioconf[] = {
    114 	/* Bluetooth module configuration */
    115 	{  7, GPIO_OUT | GPIO_SET },	/* power on */
    116 	{ 12, GPIO_ALT_FN_1_OUT },	/* 32kHz out. required by SingleStone */
    117 
    118 	/* AC97 configuration */
    119 	{ 29, GPIO_ALT_FN_1_IN },	/* SDATA_IN0 */
    120 
    121 	/* FFUART configuration */
    122 	{ 35, GPIO_ALT_FN_1_IN },	/* CTS */
    123 	{ 41, GPIO_ALT_FN_2_OUT },	/* RTS */
    124 
    125 #ifndef GXIO_BLUETOOTH_ON_HWUART
    126 	/* BTUART configuration */
    127 	{ 44, GPIO_ALT_FN_1_IN },	/* BTCTS */
    128 	{ 45, GPIO_ALT_FN_2_OUT },	/* BTRTS */
    129 #else
    130 	/* HWUART configuration */
    131 	{ 42, GPIO_ALT_FN_3_IN },	/* HWRXD */
    132 	{ 43, GPIO_ALT_FN_3_OUT },	/* HWTXD */
    133 	{ 44, GPIO_ALT_FN_3_IN },	/* HWCTS */
    134 	{ 45, GPIO_ALT_FN_3_OUT },	/* HWRTS */
    135 #endif
    136 
    137 #ifndef GXIO_BLUETOOTH_ON_HWUART
    138 	/* HWUART configuration */
    139 	{ 48, GPIO_ALT_FN_1_OUT },	/* HWTXD */
    140 	{ 49, GPIO_ALT_FN_1_IN },	/* HWRXD */
    141 	{ 50, GPIO_ALT_FN_1_IN },	/* HWCTS */
    142 	{ 51, GPIO_ALT_FN_1_OUT },	/* HWRTS */
    143 #endif
    144 
    145 	{ -1 }
    146 };
    147 #endif
    148 #if defined(CPU_XSCALE_PXA270)
    149 static struct pxa2x0_gpioconf verdexdep_gpioconf[] = {
    150 	/* Bluetooth module configuration */
    151 	{   9, GPIO_ALT_FN_3_OUT },	/* CHOUT<0> */
    152 	{  12, GPIO_OUT | GPIO_SET },
    153 
    154 	/* LCD configuration */
    155 	{  17, GPIO_IN },		/* backlight on */
    156 
    157 	/* FFUART configuration */
    158 	{  34, GPIO_ALT_FN_1_IN },	/* FFRXD */
    159 	{  39, GPIO_ALT_FN_2_OUT },	/* FFTXD */
    160 
    161 	/* BTUART configuration */
    162 	{  42, GPIO_ALT_FN_1_IN },	/* BTRXD */
    163 	{  43, GPIO_ALT_FN_2_OUT },	/* BTTXD */
    164 	{  44, GPIO_ALT_FN_1_IN },	/* BTCTS */
    165 	{  45, GPIO_ALT_FN_2_OUT },	/* BTRTS */
    166 
    167 	/* AC97 configuration */
    168 	{  29, GPIO_ALT_FN_1_IN },	/* SDATA_IN0 */
    169 
    170 	{ -1 }
    171 };
    172 #endif
    173 
    174 static const struct gxioconf busheader_conf[] = {
    175 #if defined(GUMSTIX)
    176 	{ "basix",		basix_config },
    177 	{ "cfstix",		cfstix_config },
    178 	{ "etherstix",		etherstix_config },
    179 	{ "netcf",		netcf_config },
    180 	{ "netcf-vx",		netcf_vx_config },
    181 	{ "netduo-mmc",		netduommc_config },
    182 	{ "netduo",		netduo_config },
    183 	{ "netmicrosd",		netmicrosd_config },
    184 	{ "netmicrosd-vx",	netmicrosd_config },
    185 	{ "netwifimicrosd",	netwifimicrosd_config },
    186 	{ "netmmc",		netmmc_config },
    187 	{ "netpro-vx",		netwifimicrosd_config },
    188 	{ "wifistix-cf",	wifistix_cf_config },
    189 	{ "wifistix",		wifistix_config },
    190 #elif defined(OVERO)
    191 	{ "chestnut43",		chestnut_config },
    192 	{ "tobi",		tobi_config },
    193 	{ "tobi-duo",		tobiduo_config },
    194 #endif
    195 	{ NULL }
    196 };
    197 
    198 int gxpcic_gpio_reset;
    199 struct gxpcic_slot_irqs gxpcic_slot_irqs[2] = { { 0, -1, -1 }, { 0, -1, -1 } };
    200 
    201 
    202 #if defined(GUMSTIX)
    203 /* ARGSUSED */
    204 static int
    205 gxiomatch(device_t parent, cfdata_t match, void *aux)
    206 {
    207 
    208 	struct pxaip_attach_args *pxa = aux;
    209 	bus_space_tag_t iot = &pxa2x0_bs_tag;
    210 	bus_space_handle_t ioh;
    211 
    212 	if (strcmp(pxa->pxa_name, match->cf_name) != 0 ||
    213 	    pxa->pxa_addr != PXAIPCF_ADDR_DEFAULT)
    214 		 return 0;
    215 
    216 	if (bus_space_map(iot,
    217 	    PXA2X0_MEMCTL_BASE, PXA2X0_MEMCTL_SIZE, 0, &ioh))
    218 		return 0;
    219 	bus_space_unmap(iot, ioh, PXA2X0_MEMCTL_SIZE);
    220 
    221 	/* nothing */
    222 	return 1;
    223 }
    224 
    225 /* ARGSUSED */
    226 static void
    227 gxioattach(device_t parent, device_t self, void *aux)
    228 {
    229 	struct gxio_softc *sc = device_private(self);
    230 
    231 	aprint_normal("\n");
    232 	aprint_naive("\n");
    233 
    234 	sc->sc_dev = self;
    235 	sc->sc_iot = &pxa2x0_bs_tag;
    236 
    237 	if (bus_space_map(sc->sc_iot,
    238 	    PXA2X0_MEMCTL_BASE, PXA2X0_MEMCTL_SIZE, 0, &sc->sc_ioh))
    239 		return;
    240 
    241 	/*
    242 	 *  Attach each gumstix(busheader)/overo expansion board devices.
    243 	 */
    244 	config_search_ia(gxiosearch, self, "gxio", NULL);
    245 }
    246 
    247 /* ARGSUSED */
    248 static int
    249 gxiosearch(device_t parent, cfdata_t cf, const int *ldesc, void *aux)
    250 {
    251 	struct gxio_softc *sc = device_private(parent);
    252 	struct gxio_attach_args gxa;
    253 
    254 	gxa.gxa_sc = sc;
    255 	gxa.gxa_iot = sc->sc_iot;
    256 	gxa.gxa_addr = cf->cf_loc[GXIOCF_ADDR];
    257 	gxa.gxa_gpirq = cf->cf_loc[GXIOCF_GPIRQ];
    258 
    259 	if (config_match(parent, cf, &gxa))
    260 		config_attach(parent, cf, &gxa, gxioprint);
    261 
    262 	return 0;
    263 }
    264 
    265 /* ARGSUSED */
    266 static int
    267 gxioprint(void *aux, const char *name)
    268 {
    269 	struct gxio_attach_args *gxa = (struct gxio_attach_args *)aux;
    270 
    271 	if (gxa->gxa_addr != GXIOCF_ADDR_DEFAULT)
    272 		printf(" addr 0x%lx", gxa->gxa_addr);
    273 	if (gxa->gxa_gpirq > 0)
    274 		printf(" gpirq %d", gxa->gxa_gpirq);
    275 	return UNCONF;
    276 }
    277 #endif
    278 
    279 
    280 /*
    281  * configure for GPIO pin and expansion boards.
    282  */
    283 void
    284 gxio_config_pin(void)
    285 {
    286 #if defined(CPU_XSCALE_PXA250)
    287 	struct pxa2x0_gpioconf *gumstix_gpioconf[] = {
    288 		pxa25x_com_ffuart_gpioconf,
    289 		pxa25x_com_stuart_gpioconf,
    290 #ifndef GXIO_BLUETOOTH_ON_HWUART
    291 		pxa25x_com_btuart_gpioconf,
    292 #endif
    293 		pxa25x_com_hwuart_gpioconf,
    294 		pxa25x_i2c_gpioconf,
    295 		pxa25x_pxaacu_gpioconf,
    296 		pxa255dep_gpioconf,
    297 		NULL
    298 	};
    299 #endif
    300 #if defined(CPU_XSCALE_PXA270)
    301 	struct pxa2x0_gpioconf *verdex_gpioconf[] = {
    302 		pxa27x_com_ffuart_gpioconf,
    303 		pxa27x_com_stuart_gpioconf,
    304 		pxa27x_com_btuart_gpioconf,
    305 		pxa27x_i2c_gpioconf,
    306 		pxa27x_pxaacu_gpioconf,
    307 		pxa27x_pxamci_gpioconf,
    308 		pxa27x_ohci_gpioconf,
    309 		verdexdep_gpioconf,
    310 		NULL
    311 	};
    312 #endif
    313 
    314 	/* XXX: turn off for power of bluetooth module */
    315 #if defined(CPU_XSCALE_PXA250)
    316 	pxa2x0_gpio_set_function(7, GPIO_OUT | GPIO_CLR);
    317 #elif defined(CPU_XSCALE_PXA270)
    318 	pxa2x0_gpio_set_function(12, GPIO_OUT | GPIO_CLR);
    319 #endif
    320 	delay(100);
    321 
    322 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    323 	pxa2x0_gpio_config(
    324 	    (CPU_IS_PXA250) ? gumstix_gpioconf : verdex_gpioconf);
    325 #elif defined(CPU_XSCALE_PXA270) || defined(CPU_XSCALE_PXA250)
    326 #if defined(CPU_XSCALE_PXA270)
    327 	pxa2x0_gpio_config(verdex_gpioconf);
    328 #else
    329 	pxa2x0_gpio_config(gumstix_gpioconf);
    330 #endif
    331 #endif
    332 }
    333 
    334 void
    335 gxio_config_expansion(char *expansion)
    336 {
    337 
    338 	if (expansion == NULL) {
    339 		printf("not specified 'expansion=' in the boot args.\n");
    340 #ifdef GXIO_DEFAULT_EXPANSION
    341 		printf("configure default expansion (%s)\n",
    342 		    GXIO_DEFAULT_EXPANSION);
    343 		expansion = __UNCONST(GXIO_DEFAULT_EXPANSION);
    344 #else
    345 		return;
    346 #endif
    347 	}
    348 	gxio_config_gpio(busheader_conf, expansion);
    349 }
    350 
    351 static void
    352 gxio_config_gpio(const struct gxioconf *gxioconflist, char *expansion)
    353 {
    354 	int i, rv;
    355 
    356 	for (i = 0; i < strlen(expansion); i++)
    357 		expansion[i] = tolower(expansion[i]);
    358 	for (i = 0; gxioconflist[i].name != NULL; i++) {
    359 		rv = strncmp(expansion, gxioconflist[i].name,
    360 		    strlen(gxioconflist[i].name) + 1);
    361 		if (rv == 0) {
    362 			gxioconflist[i].config();
    363 			break;
    364 		}
    365 	}
    366 }
    367 
    368 
    369 #if defined(GUMSTIX)
    370 
    371 static void
    372 basix_config(void)
    373 {
    374 
    375 	pxa2x0_gpio_set_function(8, GPIO_ALT_FN_1_OUT);		/* MMCCS0 */
    376 	pxa2x0_gpio_set_function(53, GPIO_ALT_FN_1_OUT);	/* MMCCLK */
    377 #if 0
    378 	/* this configuration set by gxmci.c::pxamci_attach() */
    379 	pxa2x0_gpio_set_function(11, GPIO_IN);			/* nSD_DETECT */
    380 	pxa2x0_gpio_set_function(22, GPIO_IN);			/* nSD_WP */
    381 #endif
    382 }
    383 
    384 static void
    385 cfstix_config(void)
    386 {
    387 	u_int gpio, npoe_fn;
    388 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    389 	int bvd = (CPU_IS_PXA250) ? 4 : 111;
    390 #else
    391 #if defined(CPU_XSCALE_PXA270)
    392 	const int bvd = 111;
    393 #else
    394 	const int bvd = 4;
    395 #endif
    396 #endif
    397 
    398 	if (CPU_IS_PXA250) {
    399 		gxpcic_slot_irqs[0].valid = 1;
    400 		gxpcic_slot_irqs[0].cd = 11;
    401 		gxpcic_slot_irqs[0].prdy = 26;
    402 		gxpcic_gpio_reset = 8;
    403 	} else {
    404 		gxpcic_slot_irqs[0].valid = 1;
    405 		gxpcic_slot_irqs[0].cd = 104;
    406 		gxpcic_slot_irqs[0].prdy = 96;
    407 		gxpcic_gpio_reset = 97;
    408 	}
    409 
    410 #if 1
    411 	/* PCD/PRDY set by pxa2x0_pcic.c::pxapcic_attach_common() */
    412 #else
    413 	pxa2x0_gpio_set_function(11, GPIO_IN);		/* PCD1 */
    414 	pxa2x0_gpio_set_function(26, GPIO_IN);		/* PRDY1/~IRQ1 */
    415 #endif
    416 	pxa2x0_gpio_set_function(bvd, GPIO_IN); 	/* BVD1/~STSCHG1 */
    417 
    418 	for (gpio = 48, npoe_fn = 0; gpio <= 53 ; gpio++)
    419 		npoe_fn |= pxa2x0_gpio_get_function(gpio);
    420 	npoe_fn &= GPIO_SET;
    421 
    422 	pxa2x0_gpio_set_function(48, GPIO_ALT_FN_2_OUT | npoe_fn); /* nPOE */
    423 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    424 	pxa2x0_gpio_set_function(50, GPIO_ALT_FN_2_OUT);	/* nPIOR */
    425 	pxa2x0_gpio_set_function(51, GPIO_ALT_FN_2_OUT);	/* nPIOW */
    426 	if (CPU_IS_PXA250) {
    427 		pxa2x0_gpio_set_function(52, GPIO_ALT_FN_2_OUT); /* nPCE1 */
    428 		pxa2x0_gpio_set_function(53, GPIO_ALT_FN_2_OUT); /* nPCE2 */
    429 		pxa2x0_gpio_set_function(54, GPIO_ALT_FN_2_OUT); /* pSKTSEL */
    430 	} else {
    431 		pxa2x0_gpio_set_function(102, GPIO_ALT_FN_1_OUT); /* nPCE1 */
    432 		pxa2x0_gpio_set_function(105, GPIO_ALT_FN_1_OUT); /* nPCE2 */
    433 		pxa2x0_gpio_set_function(79, GPIO_ALT_FN_1_OUT);  /* pSKTSEL */
    434 	}
    435 	pxa2x0_gpio_set_function(55, GPIO_ALT_FN_2_OUT);	/* nPREG */
    436 	pxa2x0_gpio_set_function(56, GPIO_ALT_FN_1_IN);		/* nPWAIT */
    437 	pxa2x0_gpio_set_function(57, GPIO_ALT_FN_1_IN);		/* nIOIS16 */
    438 }
    439 
    440 static void
    441 etherstix_config(void)
    442 {
    443 	extern struct cfdata cfdata[];
    444 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    445 	int rst = (CPU_IS_PXA250) ? 80 : 32;
    446 	int irq = (CPU_IS_PXA250) ? 36 : 99;
    447 #else
    448 #if defined(CPU_XSCALE_PXA270)
    449 	const int rst = 32, irq = 99;
    450 #else
    451 	const int rst = 80, irq = 36;
    452 #endif
    453 #endif
    454 	int i;
    455 
    456 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    457 	pxa2x0_gpio_set_function(15, GPIO_ALT_FN_2_OUT);	/* nCS 1 */
    458 	pxa2x0_gpio_set_function(rst, GPIO_OUT | GPIO_SET);	/* RESET 1 */
    459 	delay(1);
    460 	pxa2x0_gpio_set_function(rst, GPIO_OUT | GPIO_CLR);
    461 	delay(50000);
    462 
    463 	for (i = 0; cfdata[i].cf_name != NULL; i++)
    464 		if (strcmp(cfdata[i].cf_name, "sm") == 0 &&
    465 		    strcmp(cfdata[i].cf_atname, "sm_gxio") == 0 &&
    466 		    cfdata[i].cf_loc[GXIOCF_ADDR] == 0x04000300 &&
    467 		    cfdata[i].cf_loc[GXIOCF_GPIRQ] == GXIOCF_GPIRQ_DEFAULT)
    468 			cfdata[i].cf_loc[GXIOCF_GPIRQ] = irq;
    469 }
    470 
    471 static void
    472 netcf_config(void)
    473 {
    474 
    475 	etherstix_config();
    476 	cfstix_config();
    477 }
    478 
    479 static void
    480 netcf_vx_config(void)
    481 {
    482 
    483 	/*
    484 	 * XXXX: More power is necessary for NIC and USB???
    485 	 * (no document.  from Linux)
    486 	 */
    487 
    488 	pxa2x0_gpio_set_function(27, GPIO_IN);
    489 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_CLR);
    490 	pxa2x0_gpio_set_function(118, GPIO_ALT_FN_1_IN | GPIO_CLR);
    491 
    492 	etherstix_config();
    493 	cfstix_config();
    494 	if (CPU_IS_PXA270) {
    495 		/* Overwrite */
    496 		gxpcic_slot_irqs[0].cd = 104;
    497 		gxpcic_slot_irqs[0].prdy = 109;
    498 		gxpcic_gpio_reset = 110;
    499 	};
    500 }
    501 
    502 static void
    503 netduommc_config(void)
    504 {
    505 
    506 	netduo_config();
    507 	basix_config();
    508 }
    509 
    510 static void
    511 netduo_config(void)
    512 {
    513 
    514 	etherstix_config();
    515 
    516 	pxa2x0_gpio_set_function(78, GPIO_ALT_FN_2_OUT);	/* nCS 2 */
    517 	pxa2x0_gpio_set_function(52, GPIO_OUT | GPIO_SET);	/* RESET 2 */
    518 	delay(1);
    519 	pxa2x0_gpio_set_function(52, GPIO_OUT | GPIO_CLR);
    520 	delay(50000);
    521 }
    522 
    523 static void
    524 netmicrosd_config(void)
    525 {
    526 
    527 	/* MicroSD(mci) always configure on PXA270 */
    528 
    529 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    530 	pxa2x0_gpio_set_function(15, GPIO_ALT_FN_2_OUT);	/* nCS 1 */
    531 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_CLR);	/* RESET 1 */
    532 	delay(hz / 2);
    533 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_SET);
    534 	delay(50000);
    535 }
    536 
    537 static void
    538 netwifimicrosd_config(void)
    539 {
    540 
    541 	netmicrosd_config();
    542 
    543 	cfstix_config();
    544 	/* However use pxamci. */
    545 	pxa2x0_gpio_set_function(111, GPIO_CLR | GPIO_ALT_FN_1_IN);
    546 	/* Power to Marvell 88W8385 */
    547 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    548 }
    549 
    550 static void
    551 netmmc_config(void)
    552 {
    553 
    554 	etherstix_config();
    555 	basix_config();
    556 }
    557 
    558 static void
    559 wifistix_config(void)
    560 {
    561 
    562 	cfstix_config();
    563 
    564 	/* Power to Marvell 88W8385 */
    565 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    566 }
    567 
    568 static void
    569 wifistix_cf_config(void)
    570 {
    571 
    572 	gxpcic_slot_irqs[1].valid = 1;
    573 	gxpcic_slot_irqs[1].cd = 36;
    574 	gxpcic_slot_irqs[1].prdy = 27;
    575 
    576 #if 1
    577 	/* this configuration set by pxa2x0_pcic.c::pxapcic_attach_common() */
    578 #else
    579 	pxa2x0_gpio_set_function(36, GPIO_IN);		/* PCD2 */
    580 	pxa2x0_gpio_set_function(27, GPIO_IN);		/* PRDY2/~IRQ2 */
    581 #endif
    582 	pxa2x0_gpio_set_function(18, GPIO_IN); 		/* BVD2/~STSCHG2 */
    583 
    584 	cfstix_config();
    585 
    586 	/* Power to Marvell 88W8385 */
    587 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    588 }
    589 
    590 #elif defined(OVERO)
    591 
    592 static void
    593 eth0_config(void)
    594 {
    595 	extern struct cfdata cfdata[];
    596 	cfdata_t cf = &cfdata[0];
    597 
    598 	/*
    599 	 * ETH0 connects via CS5.  It use GPIO 176 for IRQ.
    600 	 */
    601 
    602 	while (cf->cf_name != NULL) {
    603 		if (strcmp(cf->cf_name, "smsh") == 0 &&
    604 		    cf->cf_loc[GPMCCF_INTR] == PIC_MAXSOURCES + 176)
    605 			break;
    606 		cf++;
    607 	}
    608 	if (cf->cf_name == NULL ||
    609 	    cf->cf_loc[GPMCCF_ADDR] == GPMCCF_ADDR_DEFAULT)
    610 		return;
    611 
    612 	ioreg_write(OVERO_GPMC_VBASE + GPMC_CONFIG7_5,
    613 	    GPMC_CONFIG7_CSVALID |
    614 	    GPMC_CONFIG7(GPMC_CONFIG7_MASK_16M, cf->cf_loc[GPMCCF_ADDR]));
    615 
    616 	/*
    617 	 * Maybe need NRESET and delay(9).
    618 	 * However delay(9) needs to attach mputmr.
    619 	 */
    620 }
    621 
    622 static void
    623 eth1_config(void)
    624 {
    625 	extern struct cfdata cfdata[];
    626 	cfdata_t cf = &cfdata[0];
    627 
    628 	/*
    629 	 * ETH1 connects via CS4.  It use GPIO 65 for IRQ.
    630 	 */
    631 
    632 	while (cf->cf_name != NULL) {
    633 		if (strcmp(cf->cf_name, "smsh") == 0 &&
    634 		    cf->cf_loc[GPMCCF_INTR] == PIC_MAXSOURCES + 65)
    635 			break;
    636 		cf++;
    637 	}
    638 	if (cf->cf_name == NULL ||
    639 	    cf->cf_loc[GPMCCF_ADDR] == GPMCCF_ADDR_DEFAULT)
    640 		return;
    641 
    642 	ioreg_write(OVERO_GPMC_VBASE + GPMC_CONFIG7_4,
    643 	    GPMC_CONFIG7_CSVALID |
    644 	    GPMC_CONFIG7(GPMC_CONFIG7_MASK_16M, cf->cf_loc[GPMCCF_ADDR]));
    645 
    646 	/* ETH1 is sure to be reset with ETH0. */
    647 }
    648 
    649 static void
    650 chestnut_config(void)
    651 {
    652 
    653 	eth0_config();
    654 }
    655 
    656 static void
    657 tobi_config(void)
    658 {
    659 
    660 	eth0_config();
    661 }
    662 
    663 static void
    664 tobiduo_config(void)
    665 {
    666 
    667 	eth0_config();
    668 	eth1_config();
    669 }
    670 #endif
    671