hdlgreg.h revision 1.4 1 /* $NetBSD: hdlgreg.h,v 1.4 2025/04/08 13:47:03 rin Exp $ */
2
3 /*-
4 * Copyright (C) 2005, 2006 NONAKA Kimihiro <nonaka (at) netbsd.org>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 #ifndef _HDLGREG_H_
29 #define _HDLGREG_H_
30
31 /*
32 * Memory map and register definitions for I-O DATA HDL-G
33 */
34
35 /*
36 * The memory map of I/O-DATA HDL-G looks like so:
37 *
38 * ------------------------------
39 * Intel 80321 IOP Reserved
40 * FFFF E900 ------------------------------
41 * Peripheral Memory Mapped
42 * Registers
43 * FFFF E000 ------------------------------
44 * On-board devices
45 * FE80 0000 ------------------------------
46 * SDRAM
47 * A000 0000 ------------------------------
48 * Reserved
49 * 9100 0000 ------------------------------
50 * Flash
51 * 9080 0000 ------------------------------
52 * Reserved
53 * 9002 0000 ------------------------------
54 * ATU Outbound Transaction
55 * Windows
56 * 8000 0000 ------------------------------
57 * ATU Outbound Direct
58 * Addressing Windows
59 * 0000 1000 ------------------------------
60 * Initialization Boot Code
61 * from Flash
62 * 0000 0000 ------------------------------
63 */
64
65 /*
66 * XXXTODO
67 * Stop using devmap for HDLG_IOW_VBASE and HDLG_80321_VBASE;
68 * let arm/xscale/i80321* codes use bus_space_handle_t instead of
69 * virtual address itself.
70 */
71 /*
72 * We allocate a page table for VA 0xfe400000 (4MB) and map the
73 * PCI I/O space (64K) and i80321 memory-mapped registers (4K) there.
74 */
75 #define HDLG_IOPXS_VBASE 0xfe400000UL
76 #define HDLG_IOW_VBASE HDLG_IOPXS_VBASE
77 /*
78 * We choose HDLG_80321_VBASE which satisfies two constraints:
79 * - not in the same L1 section of HDLG_IOW_VBASE
80 * - same L1 section offset with VERDE_PMMR_BASE
81 */
82 #define HDLG_80321_VBASE 0xfe5fe000UL
83
84 /*
85 * The GIGALANDISK on-board devices are mapped VA==PA during bootstrap.
86 * Conveniently, the size of the on-board register space is 1 section
87 * mapping.
88 */
89 #define HDLG_OBIO_BASE 0xfe800000UL
90 #define HDLG_OBIO_SIZE 0x00100000UL /* 1MB */
91
92 #define HDLG_UART1 0xfe800000UL /* TI 16550 */
93 #define HDLG_PLD 0xfe8d0000UL /* CPLD */
94
95 /*
96 * CPLD
97 */
98 #define HDLG_LEDCTRL (HDLG_PLD + 0x00)
99 #define LEDCTRL_STAT_GREEN 0x01
100 #define LEDCTRL_STAT_RED 0x02
101 #define LEDCTRL_USB1 0x04
102 #define LEDCTRL_USB2 0x08
103 #define LEDCTRL_USB3 0x10
104 #define LEDCTRL_USB4 0x20
105 #define LEDCTRL_HDD 0x40
106 #define LEDCTRL_BUZZER 0x80
107 #define HDLG_PWRLEDCTRL (HDLG_PLD + 0x01)
108 #define PWRLEDCTRL_0 0x01
109 #define PWRLEDCTRL_1 0x02
110 #define PWRLEDCTRL_2 0x04
111 #define PWRLEDCTRL_3 0x08
112 #define HDLG_BTNSTAT (HDLG_PLD + 0x02)
113 #define BTNSTAT_POWER 0x01
114 #define BTNSTAT_SELECT 0x02
115 #define BTNSTAT_COPY 0x04
116 #define BTNSTAT_REMOVE 0x08
117 #define BTNSTAT_RESET 0x10
118 #define HDLG_INTEN (HDLG_PLD + 0x03)
119 #define INTEN_PWRSW 0x01
120 #define INTEN_BUTTON 0x02
121 #define INTEN_RTC 0x40
122 #define HDLG_PWRMNG (HDLG_PLD + 0x04)
123 #define PWRMNG_POWOFF 0x01
124 #define PWRMNG_RESET 0x02
125 #define HDLG_FANCTRL (HDLG_PLD + 0x06)
126 #define FANCTRL_OFF 0x00
127 #define FANCTRL_ON 0x01
128
129 #define hdlg_enable_pldintr(bit) \
130 do { \
131 *(volatile uint8_t *)HDLG_INTEN |= (bit); \
132 } while (/*CONSTCOND*/0)
133
134 #define hdlg_disable_pldintr(bit) \
135 do { \
136 *(volatile uint8_t *)HDLG_INTEN &= ~(bit); \
137 } while (/*CONSTCOND*/0)
138
139 #endif /* _HDLGREG_H_ */
140