lubbock_lcd.c revision 1.4 1 /* $NetBSD: lubbock_lcd.c,v 1.4 2006/04/12 19:38:22 jmmv Exp $ */
2
3 /*
4 * Copyright (c) 2002, 2003 Genetec Corporation. All rights reserved.
5 * Written by Hiroyuki Bessho for Genetec Corporation.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The name of Genetec Corporation may not be used to endorse or
16 * promote products derived from this software without specific prior
17 * written permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 /*
33 * LCD driver for Intel Lubbock.
34 *
35 * Controlling LCD is almost completely done through PXA2X0's
36 * integrated LCD controller. Codes for it is arm/xscale/pxa2x0_lcd.c.
37 *
38 * Codes in this file provide platform specific things including:
39 * LCD on/off switch in on-board PLD register.
40 * LCD panel geometry
41 */
42 #include <sys/cdefs.h>
43 __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.4 2006/04/12 19:38:22 jmmv Exp $");
44
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/conf.h>
48 #include <sys/uio.h>
49 #include <sys/malloc.h>
50
51 #include <dev/cons.h>
52 #include <dev/wscons/wsconsio.h>
53 #include <dev/wscons/wsdisplayvar.h>
54 #include <dev/wscons/wscons_callbacks.h>
55
56 #include <machine/bus.h>
57 #include <arm/xscale/pxa2x0var.h>
58 #include <arm/xscale/pxa2x0reg.h>
59 #include <arm/xscale/pxa2x0_lcd.h>
60
61 #include <arch/evbarm/lubbock/lubbock_reg.h>
62 #include <arch/evbarm/lubbock/lubbock_var.h>
63
64 #include "wsdisplay.h"
65
66 int lcd_match( struct device *, struct cfdata *, void *);
67 void lcd_attach( struct device *, struct device *, void *);
68 int lcdintr(void *);
69
70 #if NWSDISPLAY > 0
71
72 /*
73 * wsdisplay glue
74 */
75 struct pxa2x0_wsscreen_descr lcd_bpp16_screen = {
76 {
77 "bpp16", 0, 0,
78 &pxa2x0_lcd_emulops,
79 0, 0,
80 WSSCREEN_WSCOLORS,
81 },
82 16 /* bits per pixel */
83 }, lcd_bpp8_screen = {
84 {
85 "bpp8", 0, 0,
86 &pxa2x0_lcd_emulops,
87 0, 0,
88 WSSCREEN_WSCOLORS,
89 },
90 8 /* bits per pixel */
91 }, lcd_bpp4_screen = {
92 {
93 "bpp4", 0, 0,
94 &pxa2x0_lcd_emulops,
95 0, 0,
96 WSSCREEN_WSCOLORS,
97 },
98 4 /* bits per pixel */
99 };
100
101
102 static const struct wsscreen_descr *lcd_scr_descr[] = {
103 #if 0
104 /* bpp4 needs a patch to rasops4 */
105 &lcd_bpp4_screen.c,
106 #endif
107 &lcd_bpp8_screen.c,
108 &lcd_bpp16_screen.c,
109 };
110
111 const struct wsscreen_list lcd_screen_list = {
112 sizeof lcd_scr_descr / sizeof lcd_scr_descr[0],
113 lcd_scr_descr
114 };
115
116 int lcd_ioctl(void *, void *, u_long, caddr_t, int, struct lwp *);
117
118 int lcd_show_screen(void *, void *, int,
119 void (*)(void *, int, int), void *);
120
121 const struct wsdisplay_accessops lcd_accessops = {
122 lcd_ioctl,
123 pxa2x0_lcd_mmap,
124 pxa2x0_lcd_alloc_screen,
125 pxa2x0_lcd_free_screen,
126 lcd_show_screen,
127 NULL, /* load_font */
128 };
129
130 #else
131 /*
132 * Interface to LCD framebuffer without wscons
133 */
134 dev_type_open(lcdopen);
135 dev_type_close(lcdclose);
136 dev_type_ioctl(lcdioctl);
137 dev_type_mmap(lcdmmap);
138 const struct cdevsw lcd_cdevsw = {
139 lcdopen, lcdclose, noread, nowrite,
140 lcdioctl, nostop, notty, nopoll, lcdmmap, D_TTY
141 };
142
143 #endif
144
145 CFATTACH_DECL(lcd_obio, sizeof (struct pxa2x0_lcd_softc), lcd_match,
146 lcd_attach, NULL, NULL);
147
148 int
149 lcd_match( struct device *parent, struct cfdata *cf, void *aux )
150 {
151 return 1;
152 }
153
154 static const struct lcd_panel_geometry sharp_LM8V31 =
155 {
156 640, /* Width */
157 480, /* Height */
158 0, /* No extra lines */
159
160 LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP,
161 10, /* clock divider */
162 0xff, /* AC bias pin freq */
163
164 2, /* horizontal sync pulse width */
165 3, /* BLW */
166 3, /* ELW */
167
168 1, /* vertical sync pulse width */
169 0, /* BFW */
170 0, /* EFW */
171
172 };
173
174 void lcd_attach( struct device *parent, struct device *self, void *aux )
175 {
176 struct pxa2x0_lcd_softc *sc = (struct pxa2x0_lcd_softc *)self;
177
178 pxa2x0_lcd_attach_sub(sc, aux, &sharp_LM8V31);
179
180
181 #if NWSDISPLAY > 0
182
183 {
184 struct wsemuldisplaydev_attach_args aa;
185
186 /* make wsdisplay screen list */
187 pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL );
188 pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL );
189 pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL );
190
191 aa.console = 0;
192 aa.scrdata = &lcd_screen_list;
193 aa.accessops = &lcd_accessops;
194 aa.accesscookie = sc;
195
196 printf( "\n" );
197
198 (void) config_found(self, &aa, wsemuldisplaydevprint);
199 }
200 #else
201 {
202 struct pxa2x0_lcd_screen *screen = pxa2x0_lcd_new_screen( sc, 8 );
203
204 if( screen ){
205 sc->active = screen;
206 pxa2x0_lcd_start_dma( sc, screen );
207 }
208
209 printf( "\n" );
210 }
211 #endif
212
213 }
214
215 #if NWSDISPLAY > 0
216
217 int
218 lcd_ioctl(void *v, void *vs, u_long cmd, caddr_t data, int flag, struct lwp *l)
219 {
220 struct obio_softc *osc =
221 (struct obio_softc *) device_parent((struct device *)v);
222 uint16_t reg;
223
224 switch (cmd) {
225 case WSDISPLAYIO_SVIDEO:
226 reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh,
227 LUBBOCK_MISCWR );
228 if( *(int *)data == WSDISPLAYIO_VIDEO_ON )
229 reg |= MISCWR_LCDDISP;
230 else
231 reg &= ~MISCWR_LCDDISP;
232 bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh,
233 LUBBOCK_MISCWR, reg );
234 break; /* turn on/off LCD controller */
235 }
236
237 return pxa2x0_lcd_ioctl( v, cmd, data, flag, l );
238 }
239
240 int
241 lcd_show_screen(void *v, void *cookie, int waitok,
242 void (*cb)(void *, int, int), void *cbarg)
243 {
244 struct obio_softc *osc =
245 (struct obio_softc *) device_parent((struct device *)v);
246
247 pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg);
248
249 /* Turn on LCD */
250 bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR,
251 MISCWR_LCDDISP |
252 bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) );
253
254 return (0);
255 }
256
257
258
259 #else /* NWSDISPLAY==0 */
260
261 int
262 lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l )
263 {
264 return 0;
265 }
266
267 int
268 lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l )
269 {
270 return 0;
271 }
272
273 paddr_t
274 lcdmmap( dev_t dev, off_t offset, int size )
275 {
276 struct pxa2x0_lcd_softc *sc = device_lookup(&lcd_cd, minor(dev));
277 struct pxa2x0_lcd_screen *scr = sc->active;
278
279 return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs,
280 offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT );
281 }
282
283 int
284 lcdioctl( dev_t dev, u_long cmd, caddr_t data,
285 int fflag, struct lwp *l )
286 {
287 return EOPNOTSUPP;
288 }
289
290 #endif /* NWSDISPLAY>0 */
291