lubbock_lcd.c revision 1.9
1 /* $NetBSD: lubbock_lcd.c,v 1.9 2009/01/29 12:28:15 nonaka Exp $ */ 2 3 /* 4 * Copyright (c) 2002, 2003 Genetec Corporation. All rights reserved. 5 * Written by Hiroyuki Bessho for Genetec Corporation. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of Genetec Corporation may not be used to endorse or 16 * promote products derived from this software without specific prior 17 * written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * LCD driver for Intel Lubbock. 34 * 35 * Controlling LCD is almost completely done through PXA2X0's 36 * integrated LCD controller. Codes for it is arm/xscale/pxa2x0_lcd.c. 37 * 38 * Codes in this file provide platform specific things including: 39 * LCD on/off switch in on-board PLD register. 40 * LCD panel geometry 41 */ 42 #include <sys/cdefs.h> 43 __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.9 2009/01/29 12:28:15 nonaka Exp $"); 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/conf.h> 48 #include <sys/uio.h> 49 #include <sys/malloc.h> 50 51 #include <dev/cons.h> 52 #include <dev/wscons/wsconsio.h> 53 #include <dev/wscons/wsdisplayvar.h> 54 #include <dev/wscons/wscons_callbacks.h> 55 56 #include <machine/bus.h> 57 #include <arm/xscale/pxa2x0var.h> 58 #include <arm/xscale/pxa2x0reg.h> 59 #include <arm/xscale/pxa2x0_lcd.h> 60 61 #include <arch/evbarm/lubbock/lubbock_reg.h> 62 #include <arch/evbarm/lubbock/lubbock_var.h> 63 64 #include "wsdisplay.h" 65 66 int lcd_match(device_t, cfdata_t, void *); 67 void lcd_attach(device_t, device_t, void *); 68 int lcdintr(void *); 69 70 #if NWSDISPLAY > 0 71 72 /* 73 * wsdisplay glue 74 */ 75 struct pxa2x0_wsscreen_descr lcd_bpp16_screen = { 76 { 77 "bpp16", 0, 0, 78 &pxa2x0_lcd_emulops, 79 0, 0, 80 WSSCREEN_WSCOLORS, 81 }, 82 16 /* bits per pixel */ 83 }, lcd_bpp8_screen = { 84 { 85 "bpp8", 0, 0, 86 &pxa2x0_lcd_emulops, 87 0, 0, 88 WSSCREEN_WSCOLORS, 89 }, 90 8 /* bits per pixel */ 91 }, lcd_bpp4_screen = { 92 { 93 "bpp4", 0, 0, 94 &pxa2x0_lcd_emulops, 95 0, 0, 96 WSSCREEN_WSCOLORS, 97 }, 98 4 /* bits per pixel */ 99 }; 100 101 102 static const struct wsscreen_descr *lcd_scr_descr[] = { 103 #if 0 104 /* bpp4 needs a patch to rasops4 */ 105 &lcd_bpp4_screen.c, 106 #endif 107 &lcd_bpp8_screen.c, 108 &lcd_bpp16_screen.c, 109 }; 110 111 const struct wsscreen_list lcd_screen_list = { 112 sizeof lcd_scr_descr / sizeof lcd_scr_descr[0], 113 lcd_scr_descr 114 }; 115 116 int lcd_ioctl(void *, void *, u_long, void *, int, struct lwp *); 117 118 int lcd_show_screen(void *, void *, int, 119 void (*)(void *, int, int), void *); 120 121 const struct wsdisplay_accessops lcd_accessops = { 122 lcd_ioctl, 123 pxa2x0_lcd_mmap, 124 pxa2x0_lcd_alloc_screen, 125 pxa2x0_lcd_free_screen, 126 lcd_show_screen, 127 NULL, /* load_font */ 128 }; 129 130 #else 131 /* 132 * Interface to LCD framebuffer without wscons 133 */ 134 dev_type_open(lcdopen); 135 dev_type_close(lcdclose); 136 dev_type_ioctl(lcdioctl); 137 dev_type_mmap(lcdmmap); 138 const struct cdevsw lcd_cdevsw = { 139 lcdopen, lcdclose, noread, nowrite, 140 lcdioctl, nostop, notty, nopoll, lcdmmap, D_TTY 141 }; 142 143 #endif 144 145 CFATTACH_DECL_NEW(lcd_obio, sizeof (struct pxa2x0_lcd_softc), lcd_match, 146 lcd_attach, NULL, NULL); 147 148 int 149 lcd_match( device_t parent, cfdata_t cf, void *aux ) 150 { 151 return 1; 152 } 153 154 static const struct lcd_panel_geometry sharp_LM8V31 = 155 { 156 640, /* Width */ 157 480, /* Height */ 158 0, /* No extra lines */ 159 160 LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP, 161 10, /* clock divider */ 162 0xff, /* AC bias pin freq */ 163 164 2, /* horizontal sync pulse width */ 165 3, /* BLW */ 166 3, /* ELW */ 167 168 1, /* vertical sync pulse width */ 169 0, /* BFW */ 170 0, /* EFW */ 171 172 }; 173 174 void lcd_attach( device_t parent, device_t self, void *aux ) 175 { 176 struct pxa2x0_lcd_softc *sc = device_private(self); 177 178 sc->dev = self; 179 180 pxa2x0_lcd_attach_sub(sc, aux, &sharp_LM8V31); 181 182 183 #if NWSDISPLAY > 0 184 185 { 186 struct wsemuldisplaydev_attach_args aa; 187 188 /* make wsdisplay screen list */ 189 pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL ); 190 pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL ); 191 pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL ); 192 193 aa.console = 0; 194 aa.scrdata = &lcd_screen_list; 195 aa.accessops = &lcd_accessops; 196 aa.accesscookie = sc; 197 198 printf( "\n" ); 199 200 (void) config_found(self, &aa, wsemuldisplaydevprint); 201 } 202 #else 203 { 204 struct pxa2x0_lcd_screen *screen; 205 int error; 206 207 error = pxa2x0_lcd_new_screen( sc, 8, &screen ); 208 if( error == 0 ){ 209 sc->active = screen; 210 pxa2x0_lcd_start_dma( sc, screen ); 211 } 212 213 printf( "\n" ); 214 } 215 #endif 216 217 } 218 219 #if NWSDISPLAY > 0 220 221 int 222 lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag, struct lwp *l) 223 { 224 struct obio_softc *osc = 225 (struct obio_softc *) device_parent((struct device *)v); 226 uint16_t reg; 227 228 switch (cmd) { 229 case WSDISPLAYIO_SVIDEO: 230 reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh, 231 LUBBOCK_MISCWR ); 232 if( *(int *)data == WSDISPLAYIO_VIDEO_ON ) 233 reg |= MISCWR_LCDDISP; 234 else 235 reg &= ~MISCWR_LCDDISP; 236 bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh, 237 LUBBOCK_MISCWR, reg ); 238 break; /* turn on/off LCD controller */ 239 } 240 241 return pxa2x0_lcd_ioctl( v, vs, cmd, data, flag, l ); 242 } 243 244 int 245 lcd_show_screen(void *v, void *cookie, int waitok, 246 void (*cb)(void *, int, int), void *cbarg) 247 { 248 struct obio_softc *osc = 249 (struct obio_softc *) device_parent((struct device *)v); 250 251 pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg); 252 253 /* Turn on LCD */ 254 bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR, 255 MISCWR_LCDDISP | 256 bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) ); 257 258 return (0); 259 } 260 261 262 263 #else /* NWSDISPLAY==0 */ 264 265 int 266 lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l ) 267 { 268 return 0; 269 } 270 271 int 272 lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l ) 273 { 274 return 0; 275 } 276 277 paddr_t 278 lcdmmap( dev_t dev, off_t offset, int size ) 279 { 280 struct pxa2x0_lcd_softc *sc = 281 device_lookup_private(&lcd_cd, minor(dev)); 282 struct pxa2x0_lcd_screen *scr = sc->active; 283 284 return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs, 285 offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT ); 286 } 287 288 int 289 lcdioctl( dev_t dev, u_long cmd, void *data, 290 int fflag, struct lwp *l ) 291 { 292 return EOPNOTSUPP; 293 } 294 295 #endif /* NWSDISPLAY>0 */ 296
Indexes created Tue Sep 30 11:09:46 GMT 2025