mmnet_machdep.c revision 1.1.2.2 1 /* $Id: mmnet_machdep.c,v 1.1.2.2 2011/11/10 14:31:40 yamt Exp $ */
2 /* $NetBSD: mmnet_machdep.c,v 1.1.2.2 2011/11/10 14:31:40 yamt Exp $ */
3
4 /*
5 * Copyright (c) 2007 Embedtronics Oy
6 * Based on tsarm_machdep.c
7 *
8 * Copyright (c) 2001, 2002, 2003 Wasabi Systems, Inc.
9 * All rights reserved.
10 *
11 * Based on code written by Jason R. Thorpe and Steve C. Woodford for
12 * Wasabi Systems, Inc.
13 *
14 * Redistribution and use in source and binary forms, with or without
15 * modification, are permitted provided that the following conditions
16 * are met:
17 * 1. Redistributions of source code must retain the above copyright
18 * notice, this list of conditions and the following disclaimer.
19 * 2. Redistributions in binary form must reproduce the above copyright
20 * notice, this list of conditions and the following disclaimer in the
21 * documentation and/or other materials provided with the distribution.
22 * 3. All advertising materials mentioning features or use of this software
23 * must display the following acknowledgement:
24 * This product includes software developed for the NetBSD Project by
25 * Wasabi Systems, Inc.
26 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
27 * or promote products derived from this software without specific prior
28 * written permission.
29 *
30 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
31 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
32 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
33 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
34 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
35 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
36 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
37 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
38 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
39 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
40 * POSSIBILITY OF SUCH DAMAGE.
41 */
42
43 /*
44 * Copyright (c) 1997,1998 Mark Brinicombe.
45 * Copyright (c) 1997,1998 Causality Limited.
46 * All rights reserved.
47 *
48 * Redistribution and use in source and binary forms, with or without
49 * modification, are permitted provided that the following conditions
50 * are met:
51 * 1. Redistributions of source code must retain the above copyright
52 * notice, this list of conditions and the following disclaimer.
53 * 2. Redistributions in binary form must reproduce the above copyright
54 * notice, this list of conditions and the following disclaimer in the
55 * documentation and/or other materials provided with the distribution.
56 * 3. All advertising materials mentioning features or use of this software
57 * must display the following acknowledgement:
58 * This product includes software developed by Mark Brinicombe
59 * for the NetBSD Project.
60 * 4. The name of the company nor the name of the author may be used to
61 * endorse or promote products derived from this software without specific
62 * prior written permission.
63 *
64 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
65 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
66 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
67 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
68 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
69 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
70 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
71 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
72 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
73 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
74 * SUCH DAMAGE.
75 *
76 * Machine dependant functions for kernel setup for Iyonix.
77 */
78 /* Adaptation for Propox MMnet by Aymeric Vincent is in the public domain */
79
80 #include <sys/cdefs.h>
81 __KERNEL_RCSID(0, "$NetBSD: mmnet_machdep.c,v 1.1.2.2 2011/11/10 14:31:40 yamt Exp $");
82
83 #include "opt_ddb.h"
84 #include "opt_kgdb.h"
85 #include "opt_pmap_debug.h"
86
87 #include <sys/param.h>
88 #include <sys/bus.h>
89 #include <sys/device.h>
90 #include <sys/systm.h>
91 #include <sys/kernel.h>
92 #include <sys/exec.h>
93 #include <sys/proc.h>
94 #include <sys/msgbuf.h>
95 #include <sys/reboot.h>
96 #include <sys/termios.h>
97 #include <sys/ksyms.h>
98
99 #include <uvm/uvm_extern.h>
100
101 #include <dev/cons.h>
102
103 #include <machine/db_machdep.h>
104 #include <ddb/db_sym.h>
105 #include <ddb/db_extern.h>
106
107 #define DRAM_BLOCKS 1
108 #include <machine/bootconfig.h>
109 #include <machine/cpu.h>
110 #include <machine/frame.h>
111 #include <arm/undefined.h>
112
113 #include <arm/arm32/machdep.h>
114
115 #include <arm/at91/at91reg.h>
116 #include <arm/at91/at91var.h>
117
118 #include <dev/ic/comreg.h>
119 #include <dev/ic/comvar.h>
120
121 #include <machine/autoconf.h>
122
123 #include "isa.h"
124
125 #include <arm/at91/at91sam9260reg.h>
126 #include <arm/at91/at91sam9260busvar.h>
127
128 #include "opt_ipkdb.h"
129 #include "ksyms.h"
130
131 #include <arm/at91/at91busvar.h>
132 #include <arm/at91/at91pdcreg.h>
133 #include <arm/at91/at91dbgureg.h>
134 #include <arm/at91/at91reg.h>
135 #include <arm/at91/at91streg.h>
136
137 /*
138 * Address to call from cpu_reset() to reset the machine.
139 * This is machine architecture dependant as it varies depending
140 * on where the ROM appears when you turn the MMU off.
141 */
142
143 u_int cpu_reset_address = 0x00000000;
144
145
146 /* boot configuration: */
147 BootConfig bootconfig; /* Boot config storage */
148 char *boot_args = NULL;
149 char *boot_file = NULL;
150
151 /* hmmm */
152 static struct arm32_dma_range mmnet_dma_ranges[4];
153 static struct at91bus_machdep mmnetbus;
154 static at91bus_tag_t old_at91bus_tag;
155
156 /* Prototypes */
157 static void mmnet_device_register(device_t dev, void *aux);
158 static void mmnetbus_init(struct at91bus_clocks *);
159 static void mmnetbus_peripheral_clock(int pid, int enable);
160 static uint32_t mmnetbus_gpio_mask(int pid);
161
162
163 /*
164 * void cpu_reboot(int howto, char *bootstr)
165 *
166 * Reboots the system
167 *
168 * Deal with any syncing, unmounting, dumping and shutdown hooks,
169 * then reset the CPU.
170 */
171 void
172 cpu_reboot(int howto, char *bootstr)
173 {
174
175 /*
176 * If we are still cold then hit the air brakes
177 * and crash to earth fast
178 */
179 if (cold) {
180 doshutdownhooks();
181 pmf_system_shutdown(boothowto);
182 printf("\r\n");
183 printf("The operating system has halted.\r\n");
184 printf("Please press any key to reboot.\r\n");
185 cngetc();
186 printf("\r\nrebooting...\r\n");
187 goto reset;
188 }
189
190 /* Disable console buffering */
191
192 /*
193 * If RB_NOSYNC was not specified sync the discs.
194 * Note: Unless cold is set to 1 here, syslogd will die during the
195 * unmount. It looks like syslogd is getting woken up only to find
196 * that it cannot page part of the binary in as the filesystem has
197 * been unmounted.
198 */
199 if (!(howto & RB_NOSYNC))
200 bootsync();
201
202 /* Say NO to interrupts */
203 splhigh();
204
205 /* Do a dump if requested. */
206 if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP)
207 dumpsys();
208
209 /* Run any shutdown hooks */
210 doshutdownhooks();
211
212 pmf_system_shutdown(boothowto);
213
214 /* Make sure IRQ's are disabled */
215 IRQdisable;
216
217 if (howto & RB_HALT) {
218 printf("\r\n");
219 printf("The operating system has halted.\r\n");
220 printf("Please press any key to reboot.\r\n");
221 cngetc();
222 }
223
224 printf("\r\nrebooting...\r\n");
225 reset:
226 /*
227 * Make really really sure that all interrupts are disabled,
228 * and poke the Internal Bus and Peripheral Bus reset lines.
229 */
230 (void) disable_interrupts(I32_bit|F32_bit);
231 STREG(ST_WDMR) = ST_WDMR_EXTEN | ST_WDMR_RSTEN | 1;
232 STREG(ST_CR) = ST_CR_WDRST;
233 for (;;);
234 }
235
236 /*
237 * u_int initarm(...)
238 *
239 * Initial entry point on startup. This gets called before main() is
240 * entered.
241 * It should be responsible for setting up everything that must be
242 * in place when main is called.
243 * This includes
244 * Taking a copy of the boot configuration structure.
245 * Initialising the physical console so characters can be printed.
246 * Setting up page tables for the kernel
247 * Initialising interrupt controllers to a sane default state
248 */
249 u_int
250 initarm(void *arg)
251 {
252 u_int ret;
253 /*
254 * basic AT91 initialization:
255 */
256 if (at91bus_init())
257 panic("%s: at91bus_init() failed", __FUNCTION__);
258
259 if (AT91_CHIP_ID() == AT91SAM9260_CHIP_ID) {
260 memcpy(&mmnetbus, at91bus_tag, sizeof(mmnetbus));
261 mmnetbus.init = mmnetbus_init;
262 mmnetbus.peripheral_clock = mmnetbus_peripheral_clock;
263 mmnetbus.gpio_mask = mmnetbus_gpio_mask;
264 old_at91bus_tag = at91bus_tag;
265 at91bus_tag = &mmnetbus;
266 }
267
268 /* Fake bootconfig structure for the benefit of pmap.c */
269 /* XXX must make the memory description h/w independent */
270 bootconfig.dramblocks = 1;
271 bootconfig.dram[0].address = 0x20000000UL;
272 bootconfig.dram[0].pages = 0x04000000UL / PAGE_SIZE;
273 ret = at91bus_setup(&bootconfig);
274
275 if (AT91_CHIP_ID() != AT91SAM9260_CHIP_ID)
276 panic("%s: processor is not AT91SAM9260", __FUNCTION__);
277
278 /* we've a specific device_register routine */
279 evbarm_device_register = mmnet_device_register;
280
281 /* We return the new stack pointer address */
282 return ret;
283 }
284
285
286 bus_dma_tag_t
287 at91_bus_dma_init(struct arm32_bus_dma_tag *dma_tag_template)
288 {
289 int i;
290 struct arm32_bus_dma_tag *dmat;
291
292 for (i = 0; i < bootconfig.dramblocks; i++) {
293 mmnet_dma_ranges[i].dr_sysbase = bootconfig.dram[i].address;
294 mmnet_dma_ranges[i].dr_busbase = bootconfig.dram[i].address;
295 mmnet_dma_ranges[i].dr_len = bootconfig.dram[i].pages *
296 PAGE_SIZE;
297 }
298
299 dmat = dma_tag_template;
300
301 dmat->_ranges = mmnet_dma_ranges;
302 dmat->_nranges = bootconfig.dramblocks;
303
304 return dmat;
305 }
306
307 void mmnetbus_init(struct at91bus_clocks *clocks)
308 {
309 (*old_at91bus_tag->init)(clocks);
310 }
311
312 uint32_t mmnetbus_gpio_mask(int pid)
313 {
314 switch (pid) {
315 case PID_PIOA: return ~0x00000300U;
316 case PID_PIOB: return ~0x0000783FU;
317 case PID_PIOC: return ~0x00000000U;
318 default: return ~0x00000000U;
319 }
320 }
321
322 void mmnetbus_peripheral_clock(int pid, int enable)
323 {
324 switch (pid) {
325 case PID_TWI:
326 if (enable) {
327 PIOA_WRITE(PIO_ASR, 0x06000000);
328 PIOA_WRITE(PIO_PDR, 0x06000000);
329 PIOA_WRITE(PIO_MDER, 0x06000000);
330 }
331 break;
332
333 case PID_SPI0:
334 if (enable) {
335 PIOA_WRITE(PIO_ASR, 0x0000000f);
336 PIOA_WRITE(PIO_PDR, 0x0000000f);
337 }
338 break;
339
340 case PID_SPI1:
341 if (enable) {
342 PIOB_WRITE(PIO_ASR, 0x0000000f);
343 PIOB_WRITE(PIO_PDR, 0x0000000f);
344 }
345 break;
346 }
347 (*old_at91bus_tag->peripheral_clock)(pid, enable);
348 }
349
350
351 static void mmnet_device_register(device_t dev, void *aux)
352 {
353 #if 0
354 if (device_is_a(dev, "at91semac")) {
355 // propagate mac address from u-boot
356 }
357 #endif
358 }
359