nslu2reg.h revision 1.1 1 /* $NetBSD: nslu2reg.h,v 1.1 2006/02/28 20:40:33 scw Exp $ */
2
3 /*-
4 * Copyright (c) 2006 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Steve C. Woodford.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the NetBSD
21 * Foundation, Inc. and its contributors.
22 * 4. Neither the name of The NetBSD Foundation nor the names of its
23 * contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 * POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #ifndef _NSLU2REG_H_
40 #define _NSLU2REG_H_
41
42 /*
43 * PCI GPIO Assignments
44 */
45 #define GPIO_PCI_INTC 9 /* GPIO[9]: PCI INTC [Input] */
46 #define PCI_INT_C IXP425_INT_GPIO_9
47 #define GPIO_PCI_INTB 10 /* GPIO[10]: PCI INTB [Input] */
48 #define PCI_INT_B IXP425_INT_GPIO_10
49 #define GPIO_PCI_INTA 11 /* GPIO[11]: PCI INTA [Input] */
50 #define PCI_INT_A IXP425_INT_GPIO_11
51 #define GPIO_PCI_RESET 13 /* GPIO[13]: PCI Reset [Output] */
52 #define GPIO_PCI_CLK 14 /* GPIO[14]: 33MHz PCI Clock [Output] */
53
54 /*
55 * I2C Bus GPIO Assignments
56 */
57 #define GPIO_I2C_SCL 6 /* GPIO[6]: I2c Clock [Output] */
58 #define GPIO_I2C_SCL_BIT (1u << 6)
59 #define GPIO_I2C_SDA 7 /* GPIO[7]: I2C Data [Tristate] */
60 #define GPIO_I2C_SDA_BIT (1u << 7)
61
62 /*
63 * LED GPIO Assignments
64 */
65 #define GPIO_LED_STATUS 0 /* GPIO[0]: Status LED [Output, active high] */
66 #define GPIO_LED_READY 1 /* GPIO[1]: Ready LED [Output, active high] */
67 #define GPIO_LED_DISK2 2 /* GPIO[2]: Disk 2 LED [Output, active low] */
68 #define GPIO_LED_DISK1 3 /* GPIO[3]: Disk 1 LED [Output, active low] */
69
70 /*
71 * Button GPIO Assignments
72 */
73 #define GPIO_BUTTON_PWR 5 /* GPIO[5]: Power button [Input, pulsed] */
74 #define BUTTON_PWR_INT IXP425_INT_GPIO_5
75 #define GPIO_BUTTON_RST 12 /* GPIO[12]: Reset button [Input, active low] */
76 #define BUTTON_RST_INT IXP425_INT_GPIO_12
77
78 /*
79 * Miscellaneous GPIO Assignments
80 */
81 #define GPIO_BUZZER 4 /* GPIO[4]: Buzzer [Output] */
82 #define GPIO_POWER_OFF 8 /* GPIO[8]: Power Off [Output, Active high] */
83 #define GPIO_EXP_CLOCK 15 /* GPIO[15]: Expandion bus clock [Output] */
84
85
86 /*
87 * Flash memory
88 */
89 #define NSLU2_FLASH_HWBASE 0x50000000
90 #define NSLU2_FLASH_VBASE 0xfc000000
91 #define NSLU2_FLASH_SIZE 0x00800000
92
93 /*
94 * Interesting locations in Flash
95 */
96 #define NSLU2_FLASH_ETHERNET_MAC (NSLU2_FLASH_VBASE + 0x3ffb0)
97
98 #endif /* _NSLU2REG_H_ */
99