autoconf.c revision 1.17 1 /* $NetBSD: autoconf.c,v 1.17 2010/01/22 08:56:05 martin Exp $ */
2
3 /*-
4 * Copyright (c) 2001 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.17 2010/01/22 08:56:05 martin Exp $");
34
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/conf.h>
38 #include <sys/device.h>
39 #include <sys/bus.h>
40
41 #include <sys/socket.h> /* these three just to get ETHER_ADDR_LEN(!) */
42 #include <net/if.h>
43 #include <net/if_ether.h>
44
45 #include <machine/yamon.h>
46
47 #include <mips/alchemy/include/aureg.h>
48 #include <mips/alchemy/include/auvar.h>
49 #include <mips/alchemy/include/aubusvar.h>
50
51 /*
52 * Configure all devices on system
53 */
54 void
55 cpu_configure(void)
56 {
57
58 intr_init();
59
60 /* Kick off autoconfiguration. */
61 (void)splhigh();
62 if (config_rootfound("mainbus", NULL) == NULL)
63 panic("no mainbus found");
64
65 /*
66 * Hardware interrupts will be enabled in
67 * sys/arch/mips/mips/mips3_clockintr.c:mips3_initclocks()
68 * to avoid hardclock(9) by CPU INT5 before softclockintr is
69 * initialized in initclocks().
70 */
71 }
72
73 void
74 cpu_rootconf(void)
75 {
76
77 setroot(booted_device, booted_partition);
78 }
79
80 void
81 device_register(struct device *dev, void *aux)
82 {
83 struct aubus_attach_args *aa = aux;
84
85 /*
86 * We don't ever know the boot device. But that's because the
87 * firmware only loads from the network.
88 */
89
90 /* Fetch the MAC addresses from YAMON. */
91 if (device_is_a(dev, "aumac")) {
92 prop_data_t pd;
93 const char *cp;
94 char *cp0;
95 int i;
96 uint8_t ethaddr[ETHER_ADDR_LEN];
97
98 /* Get the Ethernet address of the first on-board Ethernet. */
99 #if defined(ETHADDR)
100 cp = ETHADDR;
101 #else
102 cp = yamon_getenv("ethaddr");
103 #endif
104 if (cp != NULL) {
105 for (i = 0; i < ETHER_ADDR_LEN; i++) {
106 ethaddr[i] = strtoul(cp, &cp0, 16);
107 cp = cp0 + 1;
108 }
109 if (aa->aa_addr != MAC0_BASE &&
110 aa->aa_addr != AU1500_MAC0_BASE) {
111 /* XXX
112 * The PROM has a variable for the MAC address
113 * of the first interface. For now, just add
114 * 0x10 to the second last octet(!) for the
115 * second interface (Linux does the same).
116 */
117 ethaddr[4] += 0x10;
118 }
119 pd = prop_data_create_data(ethaddr, ETHER_ADDR_LEN);
120 KASSERT(pd != NULL);
121 if (prop_dictionary_set(device_properties(dev),
122 "mac-address", pd) == false) {
123 printf("WARNING: unable to set mac-addr "
124 "property for %s\n", dev->dv_xname);
125 }
126 prop_object_release(pd);
127 }
128 }
129 }
130