autoconf.c revision 1.3 1 /* $NetBSD: autoconf.c,v 1.3 2002/09/26 20:21:14 thorpej Exp $ */
2
3 /*-
4 * Copyright (c) 2001 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the NetBSD
21 * Foundation, Inc. and its contributors.
22 * 4. Neither the name of The NetBSD Foundation nor the names of its
23 * contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 * POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/conf.h>
42
43 #include <sys/socket.h> /* these three just to get ETHER_ADDR_LEN(!) */
44 #include <net/if.h>
45 #include <net/if_ether.h>
46
47 #include <machine/bus.h>
48 #include <machine/yamon.h>
49
50 #include <mips/alchemy/include/aureg.h>
51 #include <mips/alchemy/include/auvar.h>
52 #include <mips/alchemy/include/aubusvar.h>
53
54 static struct device *booted_device;
55 static int booted_partition;
56
57 /*
58 * Configure all devices on system
59 */
60 void
61 cpu_configure(void)
62 {
63
64 intr_init();
65
66 /* Kick off autoconfiguration. */
67 (void)splhigh();
68 if (config_rootfound("mainbus", "mainbus") == NULL)
69 panic("no mainbus found");
70 (void)spl0();
71 }
72
73 void
74 cpu_rootconf(void)
75 {
76
77 setroot(booted_device, booted_partition);
78 }
79
80 void
81 device_register(struct device *dev, void *aux)
82 {
83 struct cfdata *cf = dev->dv_cfdata;
84 const char *name = cf->cf_driver->cd_name;
85 struct aubus_attach_args *aa = aux;
86
87 /*
88 * We don't ever know the boot device. But that's because the
89 * firmware only loads from the network.
90 */
91
92 /* Fetch the MAC addresses from YAMON. */
93 if (strcmp(name, "aumac") == 0) {
94 uint8_t ethaddr[ETHER_ADDR_LEN];
95 char prop_name[sizeof("0xffffffff:mac-addr") + 1];
96 const char *cp;
97 char *cp0;
98 int i;
99
100 /* Get the Ethernet address of the first on-board Ethernet. */
101 #if defined(ETHADDR)
102 cp = ETHADDR;
103 #else
104 cp = yamon_getenv("ethaddr");
105 #endif
106 if (cp != NULL) {
107 for (i = 0; i < ETHER_ADDR_LEN; i++) {
108 ethaddr[i] = strtoul(cp, &cp0, 16);
109 cp = cp0 + 1;
110 }
111 if (aa->aa_addr != MAC0_BASE &&
112 aa->aa_addr != AU1500_MAC0_BASE) {
113 /* XXX
114 * The PROM has a variable for the MAC address
115 * of the first interface. For now, just add
116 * 0x10 to the second last octet(!) for the
117 * second interface (Linux does the same).
118 */
119 ethaddr[4] += 0x10;
120 }
121
122 snprintf(prop_name, sizeof(prop_name), "%p:mac-addr",
123 dev);
124 if (alchemy_info_set(prop_name, ethaddr,
125 sizeof(ethaddr), 0, 0))
126 panic("can't set mac address property for "
127 "aumac");
128 }
129 }
130 }
131