LOONGSON revision 1.14 1 # $NetBSD: LOONGSON,v 1.14 2013/02/28 12:51:18 macallan Exp $
2 #
3 # LOONGSON machine description file
4 #
5 # This machine description file is used to generate the default NetBSD
6 # kernel. The generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
8 #
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
11 #
12 # For further information on compiling NetBSD kernels, see the config(8)
13 # man page.
14 #
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
19 # device.
20
21 include "arch/evbmips/conf/std.loongson"
22
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25 #ident "LOONGSON-$Revision: 1.14 $"
26
27 maxusers 16
28
29 # Standard system options
30 options DDB # in-kernel debugger
31 #options DDB_ONPANIC=0 # don't enter debugger on panic
32 options DDB_HISTORY_SIZE=512 # enable history editing in DDB
33 #options KGDB # remote debugger
34 options DIAGNOSTIC # extra kernel debugging checks
35 #options DEBUG # extra kernel debugging support
36 #options PMAP_FAULTINFO
37 #options LOCKDEBUG
38 makeoptions DEBUG="-g"
39 options KTRACE # system call tracing support
40 options MSGBUFSIZE=8192 # dmesg buffer size
41
42 ## UVM options.
43 #options UVM_PAGE_TRKOWN
44 #options UVMHIST
45 #options UVMHIST_PRINT # Loud!
46
47 #options SCSIVERBOSE # human readable SCSI error messages
48 #options PCMCIAVERBOSE # verbose PCMCIA configuration messages
49 #options PCMCIADEBUG
50 #options PCMCIACISDEBUG
51
52 #options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
53 #options RTC_OFFSET=-540 # JST-9
54 #options RTC_OFFSET=480 # PST8
55 # In NO RTC_OFFSET , inherit RTC_OFFSET
56 # from Windows CE.
57 options NTP # network time protocol
58
59 #options WINCE_DEFAULT_SETTING # Debugging use
60
61 # Note: SysV IPC parameters can be changed dynamically; see sysctl(8).
62 options SYSVMSG # System V-like message queues
63 options SYSVSEM # System V-like semaphores
64 options SYSVSHM # System V-like memory sharing
65
66 #options SYSCALL_DEBUG # for debug
67 #options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug
68 options USERCONF # userconf(4) support
69 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
70 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
71
72 # Filesystem options
73 file-system FFS # fast filesystem with user and group quotas
74 file-system MFS # memory-based filesystem
75 file-system NFS # Sun NFS-compatible filesystem (client)
76 file-system EXT2FS # second extended file system (linux)
77 #file-system LFS # Log-based filesystem (still experimental)
78 file-system CD9660 # ISO 9660 + Rock Ridge file system
79 file-system MSDOSFS # MS-DOS file system
80 #file-system FDESC # /dev/fd
81 file-system KERNFS # /kern (kernel informational filesystem)
82 file-system NULLFS # loopback file system
83 #file-system OVERLAY # overlay file system
84 file-system PROCFS # /proc
85 #file-system UMAPFS # NULLFS + uid and gid remapping
86 file-system UNION
87 file-system PTYFS # /dev/pts/N support
88 file-system TMPFS # Efficient memory file-system
89 #file-system UDF # experimental - OSTA UDF CD/DVD file-system
90
91 options NFSSERVER # Sun NFS-compatible filesystem (server)
92 options WAPBL # File system journaling support
93 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
94 #options QUOTA # legacy UFS quotas
95 #options QUOTA2 # new, in-filesystem UFS quotas
96 #options FFS_NO_SNAPSHOT # No FFS snapshot support
97
98 # Networking options
99 #options GATEWAY # IP packet forwarding
100 options INET # IP + ICMP + TCP + UDP
101 options INET6 # IPV6
102 #options IPSEC # IP security
103 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
104 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
105 #options IPSEC_DEBUG # debug for IP security
106 #options MROUTING # Multicast routing support
107 #options PIM # Protocol Independent Multicast
108 #options ISO # OSI networking
109 #options TPIP # TPIP
110 #options EON # OSI tunneling over IP
111 options PFIL_HOOKS # pfil(9) packet filter hooks
112 options IPFILTER_LOG # ipmon(8) log support
113 options IPFILTER_LOOKUP # ippool(8) support
114 options IPFILTER_COMPAT # Compat for IP-Filter
115 #options IPFILTER_DEFAULT_BLOCK # block all packets by default
116
117 #options ALTQ # Manipulate network interfaces' output queues
118 #options ALTQ_BLUE # Stochastic Fair Blue
119 #options ALTQ_CBQ # Class-Based Queueing
120 #options ALTQ_CDNR # Diffserv Traffic Conditioner
121 #options ALTQ_FIFOQ # First-In First-Out Queue
122 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
123 #options ALTQ_HFSC # Hierarchical Fair Service Curve
124 #options ALTQ_LOCALQ # Local queueing discipline
125 #options ALTQ_PRIQ # Priority Queueing
126 #options ALTQ_RED # Random Early Detection
127 #options ALTQ_RIO # RED with IN/OUT
128 #options ALTQ_WFQ # Weighted Fair Queueing
129
130 # NetBSD backwards compatibility
131 options COMPAT_43
132 options COMPAT_16
133 options COMPAT_20
134 options COMPAT_30 # NetBSD 3.0 compatibility.
135 options COMPAT_40 # NetBSD 4.0 compatibility.
136 options COMPAT_50 # NetBSD 5.0 compatibility.
137 options COMPAT_60 # NetBSD 6.0 compatibility.
138 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
139
140
141 #options NFS_BOOT_DHCP
142 options NFS_BOOT_BOOTP
143 #options NFS_BOOT_BOOTPARAM
144
145 # compile options
146 #makeoptions DEFGP="-G 10"
147
148 config netbsd root on ? type ?
149
150 # WS console uses SUN or VT100 terminal emulation
151 options WSEMUL_VT100
152 options WSDISPLAY_COMPAT_PCVT
153 options WSDISPLAY_COMPAT_SYSCONS
154 options WSDISPLAY_COMPAT_USL
155 options WSDISPLAY_SCROLLSUPPORT
156 options WS_KERNEL_FG=WSCOL_GREEN
157 #options WSDISPLAY_DEFAULTSCREENS=4
158 options FONT_GALLANT12x22
159 # compatibility to other console drivers
160 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
161 #
162 # Hpckbd will set key board layout appropriately. You can use option
163 # 'PCKBD_LAYOUT' to overrite the default layout.
164 #
165 #options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)"
166
167 mainbus0 at root
168 cpu0 at mainbus0
169 bonito0 at mainbus0
170 pci0 at bonito0
171 sisfb0 at pci0 dev ? function ?
172 voyager0 at pci0 dev ? function ? # SM502 on GDIUM
173 voyagerfb0 at voyager0 # framebuffer portion
174 pwmclock0 at voyager0 # clock and CPU freq scaling
175 iic* at voyager0
176 strtc* at iic? addr 0x68 # GDIUM's real time clock
177 options STRTC_NO_USERRAM
178 lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor
179 stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller
180 lynxfb0 at pci0 dev ? function ? # SM712 on Yeeloong Notebook
181 #genfb0 at pci0 dev ? function ?
182 wsdisplay* at wsemuldisplaydev?
183 ehci* at pci0 dev ? function ?
184 #options EHCI_DEBUG
185 ohci* at pci0 dev ? function ?
186 #options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG
187
188 gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/
189 gpio* at gcscpcib? # timecounter, watchdog and GPIO
190 isa0 at gcscpcib?
191
192 pcib* at pci?
193 isa0 at pcib?
194
195 pckbc0 at isa? # PC keyboard controller
196 pckbd* at pckbc? # PC keyboard
197 pms* at pckbc? # PS/2 mouse for wsmouse
198 options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads
199 options PMS_ELANTECH_TOUCHPAD # Enable support for Elantech Touchpads
200 wskbd* at pckbd? console ?
201 wsmouse* at pms? mux 0
202
203 mcclock* at isa? port 0x70 # mc146818-compatible
204 com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only
205 com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port)
206
207 gcscaudio* at pci?
208 audio* at audiobus?
209
210 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
211 viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
212 options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug
213
214 # ATA (IDE) bus support
215 atabus* at ata?
216 options ATADEBUG
217
218 # IDE drives
219 # Flags are used only with controllers that support DMA operations
220 # and mode settings (e.g. some pciide controllers)
221 # The lowest order four bits (rightmost digit) of the flags define the PIO
222 # mode to use, the next set of four bits the DMA mode and the third set the
223 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
224 # to use, and the last bit must be 1 for this setting to be used.
225 # For DMA and UDMA, 0xf (1111) means 'disable'.
226 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
227 # (0xc=1100, 0xa=1010, 0xf=1111)
228 # 0x0000 means "use whatever the drive claims to support".
229 wd* at atabus? drive ? flags 0x0000
230
231 # ATAPI bus support
232 #atapibus* at atapi?
233
234 # ATAPI devices
235 # flags have the same meaning as for IDE drives.
236 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
237 #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
238 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
239 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
240
241 ral* at pci? dev ? function ? # RL2561S 802.11b/g
242 rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet
243 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S
244 # MII/PHY support
245 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
246 rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
247 ukphy* at mii? phy ? # generic unknown PHYs
248
249 # USB Hubs
250 usb* at ehci?
251 usb* at ohci?
252 uhub* at usb?
253 uhub* at uhub? port ?
254
255 # USB HID device
256 uhidev* at uhub? port ? configuration ? interface ?
257
258 # USB Mice
259 ums* at uhidev? reportid ?
260 wsmouse* at ums? mux 0
261
262 # USB Keyboards
263 ukbd* at uhidev? reportid ?
264 wskbd* at ukbd? console ? mux 1
265 options GDIUM_KEYBOARD_HACK # support Fn key on Gdium
266
267 # USB Generic HID devices
268 uhid* at uhidev? reportid ?
269
270 # USB serial adapter
271 uftdi* at uhub? port ? configuration ?
272
273 # USB Printer
274 ulpt* at uhub? port ? configuration ? interface ?
275
276 # USB Modem
277 umodem* at uhub? port ? configuration ?
278 ucom* at umodem?
279
280 # Option N.V. Wireless WAN modems
281 uhso* at uhub? port ? configuration ?
282
283 # USB Mass Storage
284 umass* at uhub? port ? configuration ? interface ?
285 scsibus* at umass? channel ?
286 sd* at scsibus? target ? lun ? # SCSI disk drives
287 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
288
289 # FTDI FT8U100AX serial adapter
290 uftdi* at uhub? port ?
291 ucom* at uftdi? portno ?
292
293 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
294 ucom* at uplcom? portno ?
295
296 umct* at uhub? port ? # MCT USB-RS232 serial adapter
297 ucom* at umct? portno ?
298
299 # Realtek RTL8187/RTL8187B 802.11b/g USB wireless adapter
300 urtw* at uhub? port ?
301
302 # USB Generic driver
303 ugen* at uhub? port ?
304
305 #
306 # accept filters
307 pseudo-device accf_data # "dataready" accept filter
308 pseudo-device accf_http # "httpready" accept filter
309
310 pseudo-device loop 1 # network loopback
311 pseudo-device ppp # serial-line IP ports
312 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
313 pseudo-device pty # pseudo-terminals
314 pseudo-device bpfilter # packet filter ports
315 #pseudo-device carp # Common Address Redundancy Protocol
316 pseudo-device ipfilter # IP filter, NAT
317
318 pseudo-device vnd # virtual disk ick
319 #options VND_COMPRESSION # compressed vnd(4)
320 #pseudo-device ccd 4 # concatenated disks
321 pseudo-device fss # file system snapshot device
322 #pseudo-device cgd 4 # cryptographic disks
323 pseudo-device clockctl # user control of clock subsystem
324
325 pseudo-device wsmux # mouse & keyboard multiplexor
326 pseudo-device wsfont
327 #pseudo-device md # memory disk device (ramdisk)
328
329 #pseudo-device raid 8 # RAIDframe disk driver
330 #options RAID_AUTOCONFIG # auto-configuration of RAID components
331 # Options to enable various other RAIDframe RAID types.
332 # options RF_INCLUDE_EVENODD=1
333 # options RF_INCLUDE_RAID5_RS=1
334 # options RF_INCLUDE_PARITYLOGGING=1
335 # options RF_INCLUDE_CHAINDECLUSTER=1
336 # options RF_INCLUDE_INTERDECLUSTER=1
337 # options RF_INCLUDE_PARITY_DECLUSTERING=1
338 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
339
340 # for IPv6
341 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
342 #pseudo-device faith # IPv[46] tcp relay translation i/f
343 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
344
345 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
346 pseudo-device vlan
347
348 ## Simple inter-network traffic bridging
349 pseudo-device bridge
350 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
351 pseudo-device agr # IEEE 802.3ad link aggregation
352 pseudo-device ksyms # /dev/ksyms
353 #pseudo-device pf # PF packet filter
354 #pseudo-device pflog # PF log if
355
356 # Veriexec
357 #
358 # a pseudo device needed for veriexec
359 #pseudo-device veriexec 1
360 #
361 # Uncomment the fingerprint methods below that are desired. Note that
362 # removing fingerprint methods will have almost no impact on the kernel
363 # code size.
364 #
365 #options VERIFIED_EXEC_FP_RMD160
366 #options VERIFIED_EXEC_FP_SHA256
367 #options VERIFIED_EXEC_FP_SHA384
368 #options VERIFIED_EXEC_FP_SHA512
369 #options VERIFIED_EXEC_FP_SHA1
370 #options VERIFIED_EXEC_FP_MD5
371