LOONGSON revision 1.29
1 # $NetBSD: LOONGSON,v 1.29 2016/12/13 20:42:17 christos Exp $ 2 # 3 # LOONGSON machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/evbmips/conf/std.loongson" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "LOONGSON-$Revision: 1.29 $" 26 27 maxusers 16 28 29 # Standard system options 30 options DDB # in-kernel debugger 31 #options DDB_ONPANIC=0 # don't enter debugger on panic 32 options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33 #options KGDB # remote debugger 34 options DIAGNOSTIC # extra kernel debugging checks 35 #options DEBUG # extra kernel debugging support 36 #options PMAP_FAULTINFO 37 #options LOCKDEBUG 38 makeoptions DEBUG="-g" 39 options KTRACE # system call tracing support 40 options MSGBUFSIZE=8192 # dmesg buffer size 41 42 ## UVM options. 43 #options UVM_PAGE_TRKOWN 44 #options UVMHIST 45 #options UVMHIST_PRINT # Loud! 46 47 #options SCSIVERBOSE # human readable SCSI error messages 48 #options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49 #options PCMCIADEBUG 50 #options PCMCIACISDEBUG 51 52 #options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53 #options RTC_OFFSET=-540 # JST-9 54 #options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57 options NTP # network time protocol 58 59 #options WINCE_DEFAULT_SETTING # Debugging use 60 61 # Note: SysV IPC parameters can be changed dynamically; see sysctl(8). 62 options SYSVMSG # System V-like message queues 63 options SYSVSEM # System V-like semaphores 64 options SYSVSHM # System V-like memory sharing 65 66 #options SYSCALL_DEBUG # for debug 67 #options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 68 options USERCONF # userconf(4) support 69 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 70 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 71 72 options INSECURE # disable kernel security levels 73 74 # Filesystem options 75 file-system FFS # fast filesystem with user and group quotas 76 file-system MFS # memory-based filesystem 77 file-system NFS # Sun NFS-compatible filesystem (client) 78 file-system EXT2FS # second extended file system (linux) 79 #file-system LFS # Log-based filesystem (still experimental) 80 file-system CD9660 # ISO 9660 + Rock Ridge file system 81 file-system MSDOSFS # MS-DOS file system 82 #file-system FDESC # /dev/fd 83 file-system KERNFS # /kern (kernel informational filesystem) 84 file-system NULLFS # loopback file system 85 #file-system OVERLAY # overlay file system 86 file-system PROCFS # /proc 87 #file-system UMAPFS # NULLFS + uid and gid remapping 88 file-system UNION 89 file-system PTYFS # /dev/pts/N support 90 file-system TMPFS # Efficient memory file-system 91 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 92 93 options NFSSERVER # Sun NFS-compatible filesystem (server) 94 options WAPBL # File system journaling support 95 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 96 #options QUOTA # legacy UFS quotas 97 #options QUOTA2 # new, in-filesystem UFS quotas 98 #options FFS_NO_SNAPSHOT # No FFS snapshot support 99 100 # Networking options 101 #options GATEWAY # IP packet forwarding 102 options INET # IP + ICMP + TCP + UDP 103 options INET6 # IPV6 104 #options IPSEC # IP security 105 #options IPSEC_DEBUG # debug for IP security 106 #options MROUTING # Multicast routing support 107 #options PIM # Protocol Independent Multicast 108 options IPFILTER_LOG # ipmon(8) log support 109 options IPFILTER_LOOKUP # ippool(8) support 110 options IPFILTER_COMPAT # Compat for IP-Filter 111 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 112 113 #options ALTQ # Manipulate network interfaces' output queues 114 #options ALTQ_BLUE # Stochastic Fair Blue 115 #options ALTQ_CBQ # Class-Based Queueing 116 #options ALTQ_CDNR # Diffserv Traffic Conditioner 117 #options ALTQ_FIFOQ # First-In First-Out Queue 118 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 119 #options ALTQ_HFSC # Hierarchical Fair Service Curve 120 #options ALTQ_LOCALQ # Local queueing discipline 121 #options ALTQ_PRIQ # Priority Queueing 122 #options ALTQ_RED # Random Early Detection 123 #options ALTQ_RIO # RED with IN/OUT 124 #options ALTQ_WFQ # Weighted Fair Queueing 125 126 # JIT compiler for bpfilter 127 #options SLJIT 128 #options BPFJIT 129 130 # NetBSD backwards compatibility 131 options COMPAT_43 # 4.3BSD binary compatibility. 132 options COMPAT_16 # NetBSD 1.6, 133 options COMPAT_20 # NetBSD 2.0, 134 options COMPAT_30 # NetBSD 3.0, 135 options COMPAT_40 # NetBSD 4.0, 136 options COMPAT_50 # NetBSD 5.0, 137 options COMPAT_60 # NetBSD 6.0, and 138 options COMPAT_70 # NetBSD 7.0 binary compatibility. 139 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 140 141 142 #options NFS_BOOT_DHCP 143 options NFS_BOOT_BOOTP 144 #options NFS_BOOT_BOOTPARAM 145 146 # compile options 147 #makeoptions DEFGP="-G 10" 148 149 config netbsd root on ? type ? 150 151 # WS console uses SUN or VT100 terminal emulation 152 options WSEMUL_VT100 153 options WSDISPLAY_COMPAT_PCVT 154 options WSDISPLAY_COMPAT_SYSCONS 155 options WSDISPLAY_COMPAT_USL 156 options WSDISPLAY_SCROLLSUPPORT 157 options WS_KERNEL_FG=WSCOL_GREEN 158 #options WSDISPLAY_DEFAULTSCREENS=4 159 options FONT_GALLANT12x22 160 options FONT_BOLD8x16 161 # compatibility to other console drivers 162 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 163 # 164 # Hpckbd will set key board layout appropriately. You can use option 165 # 'PCKBD_LAYOUT' to overrite the default layout. 166 # 167 #options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 168 169 mainbus0 at root 170 cpu0 at mainbus0 171 bonito0 at mainbus0 172 pci0 at bonito0 173 sisfb0 at pci0 dev ? function ? 174 voyager0 at pci0 dev ? function ? # SM502 on GDIUM 175 voyagerfb0 at voyager0 # framebuffer portion 176 pwmclock0 at voyager0 # clock and CPU freq scaling 177 iic* at voyager0 178 strtc* at iic? addr 0x68 # GDIUM's real time clock 179 options STRTC_NO_USERRAM 180 lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor 181 stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller 182 lynxfb0 at pci0 dev ? function ? # SM712 on Yeeloong Notebook 183 #genfb0 at pci0 dev ? function ? 184 wsdisplay* at wsemuldisplaydev? 185 ehci* at pci0 dev ? function ? 186 #options EHCI_DEBUG 187 ohci* at pci0 dev ? function ? 188 #options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 189 190 gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 191 gpio* at gcscpcib? # timecounter, watchdog and GPIO 192 isa0 at gcscpcib? 193 194 pcib* at pci? 195 isa0 at pcib? 196 197 pckbc0 at isa? # PC keyboard controller 198 pckbd* at pckbc? # PC keyboard 199 pms* at pckbc? # PS/2 mouse for wsmouse 200 options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads 201 options PMS_ELANTECH_TOUCHPAD # Enable support for Elantech Touchpads 202 wskbd* at pckbd? console ? 203 wsmouse* at pms? mux 0 204 205 mcclock* at isa? port 0x70 # mc146818-compatible 206 com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 207 com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 208 209 gcscaudio* at pci? 210 audio* at audiobus? 211 212 spkr* at audio? # PC speaker (synthesized) 213 214 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 215 viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 216 options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 217 218 # ATA (IDE) bus support 219 atabus* at ata? 220 options ATADEBUG 221 222 # IDE drives 223 # Flags are used only with controllers that support DMA operations 224 # and mode settings (e.g. some pciide controllers) 225 # The lowest order four bits (rightmost digit) of the flags define the PIO 226 # mode to use, the next set of four bits the DMA mode and the third set the 227 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 228 # to use, and the last bit must be 1 for this setting to be used. 229 # For DMA and UDMA, 0xf (1111) means 'disable'. 230 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 231 # (0xc=1100, 0xa=1010, 0xf=1111) 232 # 0x0000 means "use whatever the drive claims to support". 233 wd* at atabus? drive ? flags 0x0000 234 235 # ATAPI bus support 236 #atapibus* at atapi? 237 238 # ATAPI devices 239 # flags have the same meaning as for IDE drives. 240 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 241 #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 242 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 243 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 244 245 ral* at pci? dev ? function ? # RL2561S 802.11b/g 246 rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 247 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 248 # MII/PHY support 249 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 250 rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 251 ukphy* at mii? phy ? # generic unknown PHYs 252 253 # USB Hubs 254 usb* at ehci? 255 usb* at ohci? 256 uhub* at usb? 257 uhub* at uhub? port ? 258 259 # USB HID device 260 uhidev* at uhub? port ? configuration ? interface ? 261 262 # USB Mice 263 ums* at uhidev? reportid ? 264 wsmouse* at ums? mux 0 265 266 # USB Keyboards 267 ukbd* at uhidev? reportid ? 268 wskbd* at ukbd? console ? mux 1 269 options GDIUM_KEYBOARD_HACK # support Fn key on Gdium 270 271 # USB Generic HID devices 272 uhid* at uhidev? reportid ? 273 274 # USB serial adapter 275 uftdi* at uhub? port ? configuration ? 276 277 # USB Printer 278 ulpt* at uhub? port ? configuration ? interface ? 279 280 # USB Modem 281 umodem* at uhub? port ? configuration ? 282 ucom* at umodem? 283 284 # Option N.V. Wireless WAN modems 285 uhso* at uhub? port ? configuration ? 286 287 # USB Mass Storage 288 umass* at uhub? port ? configuration ? interface ? 289 scsibus* at umass? channel ? 290 sd* at scsibus? target ? lun ? # SCSI disk drives 291 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 292 293 # FTDI FT8U100AX serial adapter 294 uftdi* at uhub? port ? 295 ucom* at uftdi? portno ? 296 297 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 298 ucom* at uplcom? portno ? 299 300 umct* at uhub? port ? # MCT USB-RS232 serial adapter 301 ucom* at umct? portno ? 302 303 # Realtek RTL8187/RTL8187B 802.11b/g USB wireless adapter 304 urtw* at uhub? port ? 305 306 # USB Generic driver 307 ugen* at uhub? port ? 308 309 # 310 # accept filters 311 pseudo-device accf_data # "dataready" accept filter 312 pseudo-device accf_http # "httpready" accept filter 313 314 pseudo-device loop # network loopback 315 pseudo-device ppp # serial-line IP ports 316 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 317 pseudo-device pty # pseudo-terminals 318 pseudo-device bpfilter # packet filter ports 319 #pseudo-device carp # Common Address Redundancy Protocol 320 pseudo-device ipfilter # IP filter, NAT 321 322 pseudo-device vnd # virtual disk ick 323 #options VND_COMPRESSION # compressed vnd(4) 324 #pseudo-device ccd # concatenated disks 325 pseudo-device fss # file system snapshot device 326 #pseudo-device cgd # cryptographic disks 327 pseudo-device clockctl # user control of clock subsystem 328 329 pseudo-device wsmux # mouse & keyboard multiplexor 330 pseudo-device wsfont 331 #pseudo-device md # memory disk device (ramdisk) 332 333 #pseudo-device raid # RAIDframe disk driver 334 #options RAID_AUTOCONFIG # auto-configuration of RAID components 335 # Options to enable various other RAIDframe RAID types. 336 # options RF_INCLUDE_EVENODD=1 337 # options RF_INCLUDE_RAID5_RS=1 338 # options RF_INCLUDE_PARITYLOGGING=1 339 # options RF_INCLUDE_CHAINDECLUSTER=1 340 # options RF_INCLUDE_INTERDECLUSTER=1 341 # options RF_INCLUDE_PARITY_DECLUSTERING=1 342 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 343 344 # for IPv6 345 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 346 #pseudo-device faith # IPv[46] tcp relay translation i/f 347 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 348 349 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 350 pseudo-device vlan 351 352 ## Simple inter-network traffic bridging 353 pseudo-device bridge 354 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 355 pseudo-device agr # IEEE 802.3ad link aggregation 356 pseudo-device ksyms # /dev/ksyms 357 pseudo-device drvctl # driver control 358 #pseudo-device pf # PF packet filter 359 #pseudo-device pflog # PF log if 360 361 # Veriexec 362 # 363 # a pseudo device needed for veriexec 364 #pseudo-device veriexec 365 # 366 # Uncomment the fingerprint methods below that are desired. Note that 367 # removing fingerprint methods will have almost no impact on the kernel 368 # code size. 369 # 370 #options VERIFIED_EXEC_FP_RMD160 371 #options VERIFIED_EXEC_FP_SHA256 372 #options VERIFIED_EXEC_FP_SHA384 373 #options VERIFIED_EXEC_FP_SHA512 374 #options VERIFIED_EXEC_FP_SHA1 375 #options VERIFIED_EXEC_FP_MD5 376
Indexes created Wed Oct 15 16:09:53 GMT 2025