LOONGSON revision 1.3
1 # $NetBSD: LOONGSON,v 1.3 2011/08/31 16:55:41 macallan Exp $ 2 # 3 # LOONGSON machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/evbmips/conf/std.loongson" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GDIUM-$Revision: 1.3 $" 26 27 maxusers 16 28 29 # Standard system options 30 options DDB # in-kernel debugger 31 #options DDB_ONPANIC=0 # don't enter debugger on panic 32 options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33 #options KGDB # remote debugger 34 options DIAGNOSTIC # extra kernel debugging checks 35 #options DEBUG # extra kernel debugging support 36 #options PMAP_FAULTINFO 37 #options LOCKDEBUG 38 makeoptions DEBUG="-g" 39 options KTRACE # system call tracing support 40 options MSGBUFSIZE=8192 # dmesg buffer size 41 42 ## UVM options. 43 #options UVM_PAGE_TRKOWN 44 #options UVMHIST 45 #options UVMHIST_PRINT # Loud! 46 47 #options SCSIVERBOSE # human readable SCSI error messages 48 #options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49 #options PCMCIADEBUG 50 #options PCMCIACISDEBUG 51 52 #options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53 #options RTC_OFFSET=-540 # JST-9 54 #options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57 options NTP # network time protocol 58 59 #options WINCE_DEFAULT_SETTING # Debugging use 60 61 #options SYSCALL_DEBUG # for debug 62 #options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 63 options USERCONF # userconf(4) support 64 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 65 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 66 67 # Filesystem options 68 file-system FFS # fast filesystem with user and group quotas 69 file-system MFS # memory-based filesystem 70 file-system NFS # Sun NFS-compatible filesystem (client) 71 file-system EXT2FS # second extended file system (linux) 72 #file-system LFS # Log-based filesystem (still experimental) 73 file-system CD9660 # ISO 9660 + Rock Ridge file system 74 file-system MSDOSFS # MS-DOS file system 75 #file-system FDESC # /dev/fd 76 file-system KERNFS # /kern (kernel informational filesystem) 77 #file-system NULLFS # loopback file system 78 #file-system OVERLAY # overlay file system 79 file-system PROCFS # /proc 80 #file-system UMAPFS # NULLFS + uid and gid remapping 81 file-system UNION 82 file-system PTYFS # /dev/pts/N support 83 #file-system TMPFS # Efficient memory file-system 84 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 85 86 options NFSSERVER # Sun NFS-compatible filesystem (server) 87 options WAPBL # File system journaling support - Experimental 88 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 89 #options QUOTA # legacy UFS quotas 90 #options QUOTA2 # new, in-filesystem UFS quotas 91 #options FFS_NO_SNAPSHOT # No FFS snapshot support 92 93 # Networking options 94 #options GATEWAY # IP packet forwarding 95 options INET # IP + ICMP + TCP + UDP 96 options INET6 # IPV6 97 #options IPSEC # IP security 98 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 99 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 100 #options IPSEC_DEBUG # debug for IP security 101 #options MROUTING # Multicast routing support 102 #options PIM # Protocol Independent Multicast 103 #options ISO # OSI networking 104 #options TPIP # TPIP 105 #options EON # OSI tunneling over IP 106 options PFIL_HOOKS # pfil(9) packet filter hooks 107 options IPFILTER_LOG # ipmon(8) log support 108 options IPFILTER_LOOKUP # ippool(8) support 109 options IPFILTER_COMPAT # Compat for IP-Filter 110 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 111 112 #options ALTQ # Manipulate network interfaces' output queues 113 #options ALTQ_BLUE # Stochastic Fair Blue 114 #options ALTQ_CBQ # Class-Based Queueing 115 #options ALTQ_CDNR # Diffserv Traffic Conditioner 116 #options ALTQ_FIFOQ # First-In First-Out Queue 117 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 118 #options ALTQ_HFSC # Hierarchical Fair Service Curve 119 #options ALTQ_LOCALQ # Local queueing discipline 120 #options ALTQ_PRIQ # Priority Queueing 121 #options ALTQ_RED # Random Early Detection 122 #options ALTQ_RIO # RED with IN/OUT 123 #options ALTQ_WFQ # Weighted Fair Queueing 124 125 # NetBSD backwards compatibility 126 options COMPAT_43 127 options COMPAT_16 128 options COMPAT_20 129 options COMPAT_30 # NetBSD 3.0 compatibility. 130 options COMPAT_40 # NetBSD 4.0 compatibility. 131 options COMPAT_50 # NetBSD 5.0 compatibility. 132 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 133 134 135 #options NFS_BOOT_DHCP 136 options NFS_BOOT_BOOTP 137 #options NFS_BOOT_BOOTPARAM 138 139 # compile options 140 #makeoptions DEFGP="-G 10" 141 142 config netbsd root on ? type ? 143 144 # WS console uses SUN or VT100 terminal emulation 145 options WSEMUL_VT100 146 #options WSDISPLAY_DEFAULTSCREENS=4 147 options FONT_GALLANT12x22 148 # compatibility to other console drivers 149 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 150 # 151 # Hpckbd will set key board layout appropriately. You can use option 152 # 'PCKBD_LAYOUT' to overrite the default layout. 153 # 154 #options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 155 156 mainbus0 at root 157 cpu0 at mainbus0 158 bonito0 at mainbus0 159 pci0 at bonito0 160 sisfb0 at pci0 dev ? function ? 161 voyager0 at pci0 dev ? function ? 162 voyagerfb0 at voyager0 163 iic* at voyager0 164 strtc* at iic? addr 0x68 165 options STRTC_NO_USERRAM 166 lmtemp* at iic? addr 0x48 167 #genfb0 at pci0 dev ? function ? 168 wsdisplay* at wsemuldisplaydev? 169 ehci* at pci0 dev ? function ? 170 #options EHCI_DEBUG 171 ohci* at pci0 dev ? function ? 172 #options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 173 174 gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 175 gpio* at gcscpcib? # timecounter, watchdog and GPIO 176 isa0 at gcscpcib? 177 178 pcib* at pci? 179 isa0 at pcib? 180 181 mcclock* at isa? port 0x70 # mc146818-compatible 182 com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 183 com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 184 185 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 186 viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 187 options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 188 189 # ATA (IDE) bus support 190 atabus* at ata? 191 options ATADEBUG 192 193 # IDE drives 194 # Flags are used only with controllers that support DMA operations 195 # and mode settings (e.g. some pciide controllers) 196 # The lowest order four bits (rightmost digit) of the flags define the PIO 197 # mode to use, the next set of four bits the DMA mode and the third set the 198 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 199 # to use, and the last bit must be 1 for this setting to be used. 200 # For DMA and UDMA, 0xf (1111) means 'disable'. 201 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 202 # (0xc=1100, 0xa=1010, 0xf=1111) 203 # 0x0000 means "use whatever the drive claims to support". 204 wd* at atabus? drive ? flags 0x0000 205 206 # ATAPI bus support 207 #atapibus* at atapi? 208 209 # ATAPI devices 210 # flags have the same meaning as for IDE drives. 211 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 212 #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 213 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 214 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 215 216 ral* at pci? dev ? function ? # RL2561S 802.11b/g 217 rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 218 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 219 # MII/PHY support 220 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 221 rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 222 ukphy* at mii? phy ? # generic unknown PHYs 223 224 # USB Hubs 225 usb* at ehci? 226 usb* at ohci? 227 uhub* at usb? 228 uhub* at uhub? port ? 229 230 # USB HID device 231 uhidev* at uhub? port ? configuration ? interface ? 232 233 # USB Mice 234 ums* at uhidev? reportid ? 235 wsmouse* at ums? mux 0 236 237 # USB Keyboards 238 ukbd* at uhidev? reportid ? 239 wskbd* at ukbd? console ? mux 1 240 241 # USB Generic HID devices 242 uhid* at uhidev? reportid ? 243 244 # USB serial adapter 245 uftdi* at uhub? port ? configuration ? 246 247 # USB Printer 248 ulpt* at uhub? port ? configuration ? interface ? 249 250 # USB Modem 251 umodem* at uhub? port ? configuration ? 252 ucom* at umodem? 253 254 # Option N.V. Wireless WAN modems 255 uhso* at uhub? port ? configuration ? 256 257 # USB Mass Storage 258 umass* at uhub? port ? configuration ? interface ? 259 scsibus* at umass? channel ? 260 sd* at scsibus? target ? lun ? # SCSI disk drives 261 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 262 263 # FTDI FT8U100AX serial adapter 264 uftdi* at uhub? port ? 265 ucom* at uftdi? portno ? 266 267 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 268 ucom* at uplcom? portno ? 269 270 umct* at uhub? port ? # MCT USB-RS232 serial adapter 271 ucom* at umct? portno ? 272 273 # USB Generic driver 274 ugen* at uhub? port ? 275 276 # 277 # accept filters 278 pseudo-device accf_data # "dataready" accept filter 279 pseudo-device accf_http # "httpready" accept filter 280 281 pseudo-device loop 1 # network loopback 282 pseudo-device ppp # serial-line IP ports 283 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 284 pseudo-device pty # pseudo-terminals 285 pseudo-device bpfilter # packet filter ports 286 #pseudo-device carp # Common Address Redundancy Protocol 287 pseudo-device ipfilter # IP filter, NAT 288 289 pseudo-device vnd # virtual disk ick 290 #options VND_COMPRESSION # compressed vnd(4) 291 #pseudo-device ccd 4 # concatenated disks 292 pseudo-device fss # file system snapshot device 293 #pseudo-device cgd 4 # cryptographic disks 294 pseudo-device rnd # /dev/random and in-kernel generator 295 pseudo-device clockctl # user control of clock subsystem 296 297 pseudo-device wsmux # mouse & keyboard multiplexor 298 #pseudo-device md # memory disk device (ramdisk) 299 300 #pseudo-device raid 8 # RAIDframe disk driver 301 #options RAID_AUTOCONFIG # auto-configuration of RAID components 302 # Options to enable various other RAIDframe RAID types. 303 # options RF_INCLUDE_EVENODD=1 304 # options RF_INCLUDE_RAID5_RS=1 305 # options RF_INCLUDE_PARITYLOGGING=1 306 # options RF_INCLUDE_CHAINDECLUSTER=1 307 # options RF_INCLUDE_INTERDECLUSTER=1 308 # options RF_INCLUDE_PARITY_DECLUSTERING=1 309 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 310 311 # for IPv6 312 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 313 #pseudo-device faith # IPv[46] tcp relay translation i/f 314 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 315 316 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 317 pseudo-device vlan 318 319 ## Simple inter-network traffic bridging 320 pseudo-device bridge 321 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 322 pseudo-device agr # IEEE 802.3ad link aggregation 323 pseudo-device ksyms # /dev/ksyms 324 #pseudo-device pf # PF packet filter 325 #pseudo-device pflog # PF log if 326 327 # Veriexec 328 # 329 # a pseudo device needed for veriexec 330 #pseudo-device veriexec 1 331 # 332 # Uncomment the fingerprint methods below that are desired. Note that 333 # removing fingerprint methods will have almost no impact on the kernel 334 # code size. 335 # 336 #options VERIFIED_EXEC_FP_RMD160 337 #options VERIFIED_EXEC_FP_SHA256 338 #options VERIFIED_EXEC_FP_SHA384 339 #options VERIFIED_EXEC_FP_SHA512 340 #options VERIFIED_EXEC_FP_SHA1 341 #options VERIFIED_EXEC_FP_MD5 342
Indexes created Mon Oct 13 21:09:55 GMT 2025