LOONGSON revision 1.35
1# $NetBSD: LOONGSON,v 1.35 2017/09/14 07:58:40 mrg Exp $ 2# 3# LOONGSON machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/evbmips/conf/std.loongson" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "LOONGSON-$Revision: 1.35 $" 26 27maxusers 16 28 29# Standard system options 30options DDB # in-kernel debugger 31#options DDB_ONPANIC=0 # don't enter debugger on panic 32options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33#options KGDB # remote debugger 34options DIAGNOSTIC # extra kernel debugging checks 35#options DEBUG # extra kernel debugging support 36#options PMAP_FAULTINFO 37#options LOCKDEBUG 38makeoptions DEBUG="-g" 39makeoptions COPY_SYMTAB=1 # size for embedded symbol table 40options KTRACE # system call tracing support 41options MSGBUFSIZE=8192 # dmesg buffer size 42 43## UVM options. 44#options UVM_PAGE_TRKOWN 45#options UVMHIST 46#options UVMHIST_PRINT # Loud! 47 48#options SCSIVERBOSE # human readable SCSI error messages 49#options PCMCIAVERBOSE # verbose PCMCIA configuration messages 50#options PCMCIADEBUG 51#options PCMCIACISDEBUG 52 53#options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 54#options RTC_OFFSET=-540 # JST-9 55#options RTC_OFFSET=480 # PST8 56 # In NO RTC_OFFSET , inherit RTC_OFFSET 57 # from Windows CE. 58options NTP # network time protocol 59 60#options WINCE_DEFAULT_SETTING # Debugging use 61 62# Note: SysV IPC parameters can be changed dynamically; see sysctl(8). 63options SYSVMSG # System V-like message queues 64options SYSVSEM # System V-like semaphores 65options SYSVSHM # System V-like memory sharing 66 67#options SYSCALL_DEBUG # for debug 68#options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 69options USERCONF # userconf(4) support 70#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 71options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 72 73options INSECURE # disable kernel security levels 74 75# Filesystem options 76file-system FFS # fast filesystem with user and group quotas 77file-system MFS # memory-based filesystem 78file-system NFS # Sun NFS-compatible filesystem (client) 79file-system EXT2FS # second extended file system (linux) 80#file-system LFS # Log-based filesystem (still experimental) 81file-system CD9660 # ISO 9660 + Rock Ridge file system 82file-system MSDOSFS # MS-DOS file system 83#file-system FDESC # /dev/fd 84file-system KERNFS # /kern (kernel informational filesystem) 85file-system NULLFS # loopback file system 86#file-system OVERLAY # overlay file system 87file-system PROCFS # /proc 88#file-system UMAPFS # NULLFS + uid and gid remapping 89file-system UNION 90file-system PTYFS # /dev/pts/N support 91file-system TMPFS # Efficient memory file-system 92#file-system UDF # experimental - OSTA UDF CD/DVD file-system 93 94options NFSSERVER # Sun NFS-compatible filesystem (server) 95options WAPBL # File system journaling support 96#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 97#options QUOTA # legacy UFS quotas 98#options QUOTA2 # new, in-filesystem UFS quotas 99#options DISKLABEL_EI # disklabel Endian Independent support 100#options FFS_EI # FFS Endian Independent support 101#options FFS_NO_SNAPSHOT # No FFS snapshot support 102 103# Networking options 104#options GATEWAY # IP packet forwarding 105options INET # IP + ICMP + TCP + UDP 106options INET6 # IPV6 107#options IPSEC # IP security 108#options IPSEC_DEBUG # debug for IP security 109#options MROUTING # Multicast routing support 110#options PIM # Protocol Independent Multicast 111options IPFILTER_LOG # ipmon(8) log support 112options IPFILTER_LOOKUP # ippool(8) support 113options IPFILTER_COMPAT # Compat for IP-Filter 114#options IPFILTER_DEFAULT_BLOCK # block all packets by default 115 116#options ALTQ # Manipulate network interfaces' output queues 117#options ALTQ_BLUE # Stochastic Fair Blue 118#options ALTQ_CBQ # Class-Based Queueing 119#options ALTQ_CDNR # Diffserv Traffic Conditioner 120#options ALTQ_FIFOQ # First-In First-Out Queue 121#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 122#options ALTQ_HFSC # Hierarchical Fair Service Curve 123#options ALTQ_LOCALQ # Local queueing discipline 124#options ALTQ_PRIQ # Priority Queueing 125#options ALTQ_RED # Random Early Detection 126#options ALTQ_RIO # RED with IN/OUT 127#options ALTQ_WFQ # Weighted Fair Queueing 128 129# JIT compiler for bpfilter 130#options SLJIT 131#options BPFJIT 132 133# NetBSD backwards compatibility 134include "conf/compat_netbsd16.config" 135 136#options NFS_BOOT_DHCP 137options NFS_BOOT_BOOTP 138#options NFS_BOOT_BOOTPARAM 139 140# compile options 141#makeoptions DEFGP="-G 10" 142 143config netbsd root on ? type ? 144 145# WS console uses SUN or VT100 terminal emulation 146options WSEMUL_VT100 147options WSDISPLAY_COMPAT_PCVT 148options WSDISPLAY_COMPAT_SYSCONS 149options WSDISPLAY_COMPAT_USL 150options WSDISPLAY_SCROLLSUPPORT 151options WS_KERNEL_FG=WSCOL_GREEN 152#options WSDISPLAY_DEFAULTSCREENS=4 153options FONT_GALLANT12x22 154options FONT_BOLD8x16 155# compatibility to other console drivers 156options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 157# 158# Hpckbd will set key board layout appropriately. You can use option 159# 'PCKBD_LAYOUT' to overrite the default layout. 160# 161#options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 162 163mainbus0 at root 164cpu0 at mainbus0 165bonito0 at mainbus0 166pci0 at bonito0 167sisfb0 at pci0 dev ? function ? 168voyager0 at pci0 dev ? function ? # SM502 on GDIUM 169voyagerfb0 at voyager0 # framebuffer portion 170pwmclock0 at voyager0 # clock and CPU freq scaling 171iic* at voyager0 172strtc* at iic? addr 0x68 # GDIUM's real time clock 173options STRTC_NO_USERRAM 174lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor 175stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller 176lynxfb0 at pci0 dev ? function ? # SM712 on Yeeloong Notebook 177#genfb0 at pci0 dev ? function ? 178wsdisplay* at wsemuldisplaydev? 179ehci* at pci0 dev ? function ? 180#options EHCI_DEBUG 181ohci* at pci0 dev ? function ? 182#options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 183 184gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 185gpio* at gcscpcib? # timecounter, watchdog and GPIO 186isa0 at gcscpcib? 187 188pcib* at pci? 189isa0 at pcib? 190 191pckbc0 at isa? # PC keyboard controller 192pckbd* at pckbc? # PC keyboard 193pms* at pckbc? # PS/2 mouse for wsmouse 194#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume 195options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads 196options PMS_ELANTECH_TOUCHPAD # Enable support for Elantech Touchpads 197options PMS_ALPS_TOUCHPAD # Enable support for Alps Touchpads 198wskbd* at pckbd? console ? 199wsmouse* at pms? mux 0 200 201mcclock* at isa? port 0x70 # mc146818-compatible 202com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 203com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 204 205gcscaudio* at pci? 206audio* at audiobus? 207 208spkr* at audio? # PC speaker (synthesized) 209 210pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 211viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 212options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 213 214# ATA (IDE) bus support 215atabus* at ata? 216#options ATADEBUG 217 218# IDE drives 219# Flags are used only with controllers that support DMA operations 220# and mode settings (e.g. some pciide controllers) 221# The lowest order four bits (rightmost digit) of the flags define the PIO 222# mode to use, the next set of four bits the DMA mode and the third set the 223# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 224# to use, and the last bit must be 1 for this setting to be used. 225# For DMA and UDMA, 0xf (1111) means 'disable'. 226# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 227# (0xc=1100, 0xa=1010, 0xf=1111) 228# 0x0000 means "use whatever the drive claims to support". 229wd* at atabus? drive ? flags 0x0000 230 231# ATAPI bus support 232#atapibus* at atapi? 233 234# ATAPI devices 235# flags have the same meaning as for IDE drives. 236#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 237#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 238#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 239#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 240 241ral* at pci? dev ? function ? # RL2561S 802.11b/g 242rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 243re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 244# MII/PHY support 245rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 246rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 247ukphy* at mii? phy ? # generic unknown PHYs 248 249# USB Hubs 250usb* at ehci? 251usb* at ohci? 252uhub* at usb? 253uhub* at uhub? port ? 254 255# USB HID device 256uhidev* at uhub? port ? configuration ? interface ? 257 258# USB Mice 259ums* at uhidev? reportid ? 260wsmouse* at ums? mux 0 261 262# USB Keyboards 263ukbd* at uhidev? reportid ? 264wskbd* at ukbd? console ? mux 1 265options GDIUM_KEYBOARD_HACK # support Fn key on Gdium 266 267# USB Generic HID devices 268uhid* at uhidev? reportid ? 269 270# USB serial adapter 271uftdi* at uhub? port ? configuration ? 272 273# USB Printer 274ulpt* at uhub? port ? configuration ? interface ? 275 276# USB Modem 277umodem* at uhub? port ? configuration ? 278ucom* at umodem? 279 280# Option N.V. Wireless WAN modems 281uhso* at uhub? port ? configuration ? 282 283# USB Mass Storage 284umass* at uhub? port ? configuration ? interface ? 285scsibus* at umass? channel ? 286sd* at scsibus? target ? lun ? # SCSI disk drives 287cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 288 289# FTDI FT8U100AX serial adapter 290uftdi* at uhub? port ? 291ucom* at uftdi? portno ? 292 293uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 294ucom* at uplcom? portno ? 295 296umct* at uhub? port ? # MCT USB-RS232 serial adapter 297ucom* at umct? portno ? 298 299# Realtek RTL8187/RTL8187B 802.11b/g USB wireless adapter 300urtw* at uhub? port ? 301 302# USB Generic driver 303ugen* at uhub? port ? 304 305# 306# accept filters 307pseudo-device accf_data # "dataready" accept filter 308pseudo-device accf_http # "httpready" accept filter 309 310pseudo-device loop # network loopback 311pseudo-device ppp # serial-line IP ports 312pseudo-device pppoe # PPP over Ethernet (RFC 2516) 313pseudo-device pty # pseudo-terminals 314pseudo-device bpfilter # packet filter ports 315#pseudo-device carp # Common Address Redundancy Protocol 316pseudo-device ipfilter # IP filter, NAT 317 318pseudo-device vnd # virtual disk ick 319#options VND_COMPRESSION # compressed vnd(4) 320#pseudo-device ccd # concatenated disks 321pseudo-device fss # file system snapshot device 322#pseudo-device cgd # cryptographic disks 323pseudo-device clockctl # user control of clock subsystem 324 325pseudo-device wsmux # mouse & keyboard multiplexor 326pseudo-device wsfont 327#pseudo-device md # memory disk device (ramdisk) 328 329#pseudo-device raid # RAIDframe disk driver 330#options RAID_AUTOCONFIG # auto-configuration of RAID components 331# Options to enable various other RAIDframe RAID types. 332# options RF_INCLUDE_EVENODD=1 333# options RF_INCLUDE_RAID5_RS=1 334# options RF_INCLUDE_PARITYLOGGING=1 335# options RF_INCLUDE_CHAINDECLUSTER=1 336# options RF_INCLUDE_INTERDECLUSTER=1 337# options RF_INCLUDE_PARITY_DECLUSTERING=1 338# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 339 340# for IPv6 341pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 342#pseudo-device faith # IPv[46] tcp relay translation i/f 343pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 344 345## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 346pseudo-device vlan 347 348## Simple inter-network traffic bridging 349pseudo-device bridge 350#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 351pseudo-device agr # IEEE 802.3ad link aggregation 352pseudo-device ksyms # /dev/ksyms 353pseudo-device drvctl # driver control 354#pseudo-device pf # PF packet filter 355#pseudo-device pflog # PF log if 356 357# Veriexec 358# 359# a pseudo device needed for veriexec 360#pseudo-device veriexec 361# 362# Uncomment the fingerprint methods below that are desired. Note that 363# removing fingerprint methods will have almost no impact on the kernel 364# code size. 365# 366#options VERIFIED_EXEC_FP_SHA256 367#options VERIFIED_EXEC_FP_SHA384 368#options VERIFIED_EXEC_FP_SHA512 369