LOONGSON revision 1.7.2.5
1 # $NetBSD: LOONGSON,v 1.7.2.5 2012/06/02 11:08:55 mrg Exp $ 2 # 3 # LOONGSON machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/evbmips/conf/std.loongson" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "LOONGSON-$Revision: 1.7.2.5 $" 26 27 maxusers 16 28 29 # Standard system options 30 options DDB # in-kernel debugger 31 #options DDB_ONPANIC=0 # don't enter debugger on panic 32 options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33 #options KGDB # remote debugger 34 options DIAGNOSTIC # extra kernel debugging checks 35 #options DEBUG # extra kernel debugging support 36 #options PMAP_FAULTINFO 37 #options LOCKDEBUG 38 makeoptions DEBUG="-g" 39 options KTRACE # system call tracing support 40 options MSGBUFSIZE=8192 # dmesg buffer size 41 42 ## UVM options. 43 #options UVM_PAGE_TRKOWN 44 #options UVMHIST 45 #options UVMHIST_PRINT # Loud! 46 47 #options SCSIVERBOSE # human readable SCSI error messages 48 #options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49 #options PCMCIADEBUG 50 #options PCMCIACISDEBUG 51 52 #options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53 #options RTC_OFFSET=-540 # JST-9 54 #options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57 options NTP # network time protocol 58 59 #options WINCE_DEFAULT_SETTING # Debugging use 60 61 # Note: SysV IPC parameters can be changed dynamically; see sysctl(8). 62 options SYSVMSG # System V-like message queues 63 options SYSVSEM # System V-like semaphores 64 options SYSVSHM # System V-like memory sharing 65 66 #options SYSCALL_DEBUG # for debug 67 #options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 68 options USERCONF # userconf(4) support 69 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 70 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 71 72 # Filesystem options 73 file-system FFS # fast filesystem with user and group quotas 74 file-system MFS # memory-based filesystem 75 file-system NFS # Sun NFS-compatible filesystem (client) 76 file-system EXT2FS # second extended file system (linux) 77 #file-system LFS # Log-based filesystem (still experimental) 78 file-system CD9660 # ISO 9660 + Rock Ridge file system 79 file-system MSDOSFS # MS-DOS file system 80 #file-system FDESC # /dev/fd 81 file-system KERNFS # /kern (kernel informational filesystem) 82 file-system NULLFS # loopback file system 83 #file-system OVERLAY # overlay file system 84 file-system PROCFS # /proc 85 #file-system UMAPFS # NULLFS + uid and gid remapping 86 file-system UNION 87 file-system PTYFS # /dev/pts/N support 88 file-system TMPFS # Efficient memory file-system 89 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 90 91 options NFSSERVER # Sun NFS-compatible filesystem (server) 92 options WAPBL # File system journaling support 93 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 94 #options QUOTA # legacy UFS quotas 95 #options QUOTA2 # new, in-filesystem UFS quotas 96 #options FFS_NO_SNAPSHOT # No FFS snapshot support 97 98 # Networking options 99 #options GATEWAY # IP packet forwarding 100 options INET # IP + ICMP + TCP + UDP 101 options INET6 # IPV6 102 #options IPSEC # IP security 103 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 104 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 105 #options IPSEC_DEBUG # debug for IP security 106 #options MROUTING # Multicast routing support 107 #options PIM # Protocol Independent Multicast 108 #options ISO # OSI networking 109 #options TPIP # TPIP 110 #options EON # OSI tunneling over IP 111 options PFIL_HOOKS # pfil(9) packet filter hooks 112 options IPFILTER_LOG # ipmon(8) log support 113 options IPFILTER_LOOKUP # ippool(8) support 114 options IPFILTER_COMPAT # Compat for IP-Filter 115 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 116 117 #options ALTQ # Manipulate network interfaces' output queues 118 #options ALTQ_BLUE # Stochastic Fair Blue 119 #options ALTQ_CBQ # Class-Based Queueing 120 #options ALTQ_CDNR # Diffserv Traffic Conditioner 121 #options ALTQ_FIFOQ # First-In First-Out Queue 122 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 123 #options ALTQ_HFSC # Hierarchical Fair Service Curve 124 #options ALTQ_LOCALQ # Local queueing discipline 125 #options ALTQ_PRIQ # Priority Queueing 126 #options ALTQ_RED # Random Early Detection 127 #options ALTQ_RIO # RED with IN/OUT 128 #options ALTQ_WFQ # Weighted Fair Queueing 129 130 # NetBSD backwards compatibility 131 options COMPAT_43 132 options COMPAT_16 133 options COMPAT_20 134 options COMPAT_30 # NetBSD 3.0 compatibility. 135 options COMPAT_40 # NetBSD 4.0 compatibility. 136 options COMPAT_50 # NetBSD 5.0 compatibility. 137 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 138 139 140 #options NFS_BOOT_DHCP 141 options NFS_BOOT_BOOTP 142 #options NFS_BOOT_BOOTPARAM 143 144 # compile options 145 #makeoptions DEFGP="-G 10" 146 147 config netbsd root on ? type ? 148 149 # WS console uses SUN or VT100 terminal emulation 150 options WSEMUL_VT100 151 options WS_KERNEL_FG=WSCOL_GREEN 152 #options WSDISPLAY_DEFAULTSCREENS=4 153 options FONT_GALLANT12x22 154 # compatibility to other console drivers 155 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 156 # 157 # Hpckbd will set key board layout appropriately. You can use option 158 # 'PCKBD_LAYOUT' to overrite the default layout. 159 # 160 #options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 161 162 mainbus0 at root 163 cpu0 at mainbus0 164 bonito0 at mainbus0 165 pci0 at bonito0 166 sisfb0 at pci0 dev ? function ? 167 voyager0 at pci0 dev ? function ? # SM502 on GDIUM 168 voyagerfb0 at voyager0 # framebuffer portion 169 iic* at voyager0 170 strtc* at iic? addr 0x68 # GDIUM's real time clock 171 options STRTC_NO_USERRAM 172 lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor 173 stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller 174 lynxfb0 at pci0 dev ? function ? # SM712 on Yeeloong Notebook 175 #genfb0 at pci0 dev ? function ? 176 wsdisplay* at wsemuldisplaydev? 177 ehci* at pci0 dev ? function ? 178 #options EHCI_DEBUG 179 ohci* at pci0 dev ? function ? 180 #options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 181 182 gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 183 gpio* at gcscpcib? # timecounter, watchdog and GPIO 184 isa0 at gcscpcib? 185 186 pcib* at pci? 187 isa0 at pcib? 188 189 pckbc0 at isa? # PC keyboard controller 190 pckbd* at pckbc? # PC keyboard 191 pms* at pckbc? # PS/2 mouse for wsmouse 192 options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads 193 options PMS_ELANTECH_TOUCHPAD # Enable support for Elantech Touchpads 194 wskbd* at pckbd? console ? 195 wsmouse* at pms? mux 0 196 197 mcclock* at isa? port 0x70 # mc146818-compatible 198 com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 199 com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 200 201 gcscaudio* at pci? 202 audio* at audiobus? 203 204 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 205 viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 206 options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 207 208 # ATA (IDE) bus support 209 atabus* at ata? 210 options ATADEBUG 211 212 # IDE drives 213 # Flags are used only with controllers that support DMA operations 214 # and mode settings (e.g. some pciide controllers) 215 # The lowest order four bits (rightmost digit) of the flags define the PIO 216 # mode to use, the next set of four bits the DMA mode and the third set the 217 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 218 # to use, and the last bit must be 1 for this setting to be used. 219 # For DMA and UDMA, 0xf (1111) means 'disable'. 220 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 221 # (0xc=1100, 0xa=1010, 0xf=1111) 222 # 0x0000 means "use whatever the drive claims to support". 223 wd* at atabus? drive ? flags 0x0000 224 225 # ATAPI bus support 226 #atapibus* at atapi? 227 228 # ATAPI devices 229 # flags have the same meaning as for IDE drives. 230 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 231 #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 232 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 233 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 234 235 ral* at pci? dev ? function ? # RL2561S 802.11b/g 236 rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 237 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 238 # MII/PHY support 239 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 240 rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 241 ukphy* at mii? phy ? # generic unknown PHYs 242 243 # USB Hubs 244 usb* at ehci? 245 usb* at ohci? 246 uhub* at usb? 247 uhub* at uhub? port ? 248 249 # USB HID device 250 uhidev* at uhub? port ? configuration ? interface ? 251 252 # USB Mice 253 ums* at uhidev? reportid ? 254 wsmouse* at ums? mux 0 255 256 # USB Keyboards 257 ukbd* at uhidev? reportid ? 258 wskbd* at ukbd? console ? mux 1 259 options GDIUM_KEYBOARD_HACK # support Fn key on Gdium 260 261 # USB Generic HID devices 262 uhid* at uhidev? reportid ? 263 264 # USB serial adapter 265 uftdi* at uhub? port ? configuration ? 266 267 # USB Printer 268 ulpt* at uhub? port ? configuration ? interface ? 269 270 # USB Modem 271 umodem* at uhub? port ? configuration ? 272 ucom* at umodem? 273 274 # Option N.V. Wireless WAN modems 275 uhso* at uhub? port ? configuration ? 276 277 # USB Mass Storage 278 umass* at uhub? port ? configuration ? interface ? 279 scsibus* at umass? channel ? 280 sd* at scsibus? target ? lun ? # SCSI disk drives 281 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 282 283 # FTDI FT8U100AX serial adapter 284 uftdi* at uhub? port ? 285 ucom* at uftdi? portno ? 286 287 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 288 ucom* at uplcom? portno ? 289 290 umct* at uhub? port ? # MCT USB-RS232 serial adapter 291 ucom* at umct? portno ? 292 293 # Realtek RTL8187/RTL8187B 802.11b/g USB wireless adapter 294 urtw* at uhub? port ? 295 296 # USB Generic driver 297 ugen* at uhub? port ? 298 299 # 300 # accept filters 301 pseudo-device accf_data # "dataready" accept filter 302 pseudo-device accf_http # "httpready" accept filter 303 304 pseudo-device loop 1 # network loopback 305 pseudo-device ppp # serial-line IP ports 306 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 307 pseudo-device pty # pseudo-terminals 308 pseudo-device bpfilter # packet filter ports 309 #pseudo-device carp # Common Address Redundancy Protocol 310 pseudo-device ipfilter # IP filter, NAT 311 312 pseudo-device vnd # virtual disk ick 313 #options VND_COMPRESSION # compressed vnd(4) 314 #pseudo-device ccd 4 # concatenated disks 315 pseudo-device fss # file system snapshot device 316 #pseudo-device cgd 4 # cryptographic disks 317 pseudo-device clockctl # user control of clock subsystem 318 319 pseudo-device wsmux # mouse & keyboard multiplexor 320 pseudo-device wsfont 321 #pseudo-device md # memory disk device (ramdisk) 322 323 #pseudo-device raid 8 # RAIDframe disk driver 324 #options RAID_AUTOCONFIG # auto-configuration of RAID components 325 # Options to enable various other RAIDframe RAID types. 326 # options RF_INCLUDE_EVENODD=1 327 # options RF_INCLUDE_RAID5_RS=1 328 # options RF_INCLUDE_PARITYLOGGING=1 329 # options RF_INCLUDE_CHAINDECLUSTER=1 330 # options RF_INCLUDE_INTERDECLUSTER=1 331 # options RF_INCLUDE_PARITY_DECLUSTERING=1 332 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 333 334 # for IPv6 335 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 336 #pseudo-device faith # IPv[46] tcp relay translation i/f 337 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 338 339 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 340 pseudo-device vlan 341 342 ## Simple inter-network traffic bridging 343 pseudo-device bridge 344 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 345 pseudo-device agr # IEEE 802.3ad link aggregation 346 pseudo-device ksyms # /dev/ksyms 347 #pseudo-device pf # PF packet filter 348 #pseudo-device pflog # PF log if 349 350 # Veriexec 351 # 352 # a pseudo device needed for veriexec 353 #pseudo-device veriexec 1 354 # 355 # Uncomment the fingerprint methods below that are desired. Note that 356 # removing fingerprint methods will have almost no impact on the kernel 357 # code size. 358 # 359 #options VERIFIED_EXEC_FP_RMD160 360 #options VERIFIED_EXEC_FP_SHA256 361 #options VERIFIED_EXEC_FP_SHA384 362 #options VERIFIED_EXEC_FP_SHA512 363 #options VERIFIED_EXEC_FP_SHA1 364 #options VERIFIED_EXEC_FP_MD5 365
Indexes created Thu Oct 30 22:09:55 GMT 2025