machdep.c revision 1.7
1 /* $NetBSD: machdep.c,v 1.7 2009/03/18 10:22:28 cegger Exp $ */ 2 3 /* 4 * Copyright (c) 2002 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart (at) augustsson.net) at Sandburst Corp. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Copyright (C) 1995, 1996 Wolfgang Solfrank. 34 * Copyright (C) 1995, 1996 TooLs GmbH. 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * 2. Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in the 44 * documentation and/or other materials provided with the distribution. 45 * 3. All advertising materials mentioning features or use of this software 46 * must display the following acknowledgement: 47 * This product includes software developed by TooLs GmbH. 48 * 4. The name of TooLs GmbH may not be used to endorse or promote products 49 * derived from this software without specific prior written permission. 50 * 51 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR 52 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 53 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 54 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 56 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 57 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 58 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 59 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 60 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 61 */ 62 63 #include <sys/cdefs.h> 64 __KERNEL_RCSID(0, "$NetBSD: machdep.c,v 1.7 2009/03/18 10:22:28 cegger Exp $"); 65 66 #include "opt_compat_netbsd.h" 67 #include "opt_ddb.h" 68 #include "opt_ddbparam.h" 69 #include "opt_inet.h" 70 #include "opt_ccitt.h" 71 #include "opt_iso.h" 72 #include "opt_ns.h" 73 #include "opt_ipkdb.h" 74 75 #include <sys/param.h> 76 #include <sys/buf.h> 77 #include <sys/conf.h> 78 #include <sys/device.h> 79 #include <sys/exec.h> 80 #include <sys/extent.h> 81 #include <sys/kernel.h> 82 #include <sys/kgdb.h> 83 #include <sys/malloc.h> 84 #include <sys/mbuf.h> 85 #include <sys/mount.h> 86 #include <sys/msgbuf.h> 87 #include <sys/proc.h> 88 #include <sys/reboot.h> 89 #include <sys/syscallargs.h> 90 #include <sys/syslog.h> 91 #include <sys/sysctl.h> 92 #include <sys/systm.h> 93 #include <sys/user.h> 94 #include <sys/ksyms.h> 95 96 #include <uvm/uvm.h> 97 #include <uvm/uvm_extern.h> 98 99 #include <net/netisr.h> 100 101 #include <machine/bus.h> 102 #include <machine/db_machdep.h> 103 #include <machine/intr.h> 104 #include <machine/pio.h> 105 #include <machine/pmap.h> 106 #include <machine/powerpc.h> 107 #include <machine/trap.h> 108 #include <machine/pmppc.h> 109 110 #include <powerpc/oea/bat.h> 111 #include <arch/powerpc/pic/picvar.h> 112 113 #include <ddb/db_extern.h> 114 115 #include <dev/cons.h> 116 117 #include <dev/ic/cpc700reg.h> 118 #include <dev/ic/cpc700uic.h> 119 120 #include "com.h" 121 #if (NCOM > 0) 122 #include <sys/termios.h> 123 #include <dev/ic/comreg.h> 124 #include <dev/ic/comvar.h> 125 #endif 126 127 #include "ksyms.h" 128 129 struct powerpc_bus_space pmppc_mem_tag = { 130 _BUS_SPACE_LITTLE_ENDIAN|_BUS_SPACE_MEM_TYPE, 131 0, 0, 0xffffffff, 132 NULL, 133 }; 134 struct powerpc_bus_space pmppc_pci_io_tag = { 135 _BUS_SPACE_LITTLE_ENDIAN|_BUS_SPACE_MEM_TYPE, 136 0, CPC_PCI_IO_BASE, 0xffffffff, 137 NULL, 138 }; 139 140 static char ex_storage[1][EXTENT_FIXED_STORAGE_SIZE(8)] 141 __attribute__((aligned(8))); 142 143 144 #ifdef KGDB 145 char kgdb_devname[] = KGDB_DEVNAME; 146 int comkgdbaddr = KGDB_DEVADDR; 147 int comkgdbrate = KGDB_DEVRATE; 148 149 #ifndef KGDB_DEVMODE 150 #define KGDB_DEVMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */ 151 #endif 152 int comkgdbmode = KGDB_DEVMODE; 153 154 void kgdb_port_init(void); 155 #endif /* KGDB */ 156 157 /* 158 * Global variables used here and there 159 */ 160 struct mem_region physmemr[2], availmemr[2]; 161 162 struct a_config a_config; 163 164 void initppc(u_int, u_int, u_int, void *); /* Called from locore */ 165 void pmppc_setup(void); 166 void setleds(int leds); 167 168 /* 169 * Force cpu_info to be in the data segment to avoid the 170 * memset() blowing away the data set up by locore.S. 171 */ 172 #if 0 173 /* this is defined in powerpc/oea/cpu_subr.c, I don't understand the above 174 * comment however. 175 */ 176 struct cpu_info cpu_info[1] = { { .ci_curlwp = &lwp0, }, }; 177 #endif 178 179 void 180 initppc(u_int startkernel, u_int endkernel, u_int args, void *btinfo) 181 { 182 extern void consinit(void); 183 extern u_long ticks_per_sec; 184 extern unsigned char edata[], end[]; 185 186 memset(&edata, 0, end - edata); /* clear BSS */ 187 188 pmppc_setup(); 189 190 physmemr[0].start = 0; 191 physmemr[0].size = a_config.a_mem_size; 192 physmemr[1].size = 0; 193 availmemr[0].start = (endkernel + PGOFSET) & ~PGOFSET; 194 availmemr[0].size = a_config.a_mem_size - availmemr[0].start; 195 availmemr[1].size = 0; 196 197 #ifdef BOOTHOWTO 198 /* 199 * boothowto 200 */ 201 boothowto = BOOTHOWTO; 202 #endif 203 204 if (bus_space_init(&pmppc_mem_tag, "iomem", 205 ex_storage[0], sizeof(ex_storage[0]))) 206 panic("bus_space_init failed"); 207 208 /* 209 * Get CPU clock 210 */ 211 ticks_per_sec = a_config.a_bus_freq; 212 ticks_per_sec /= 4; /* 4 cycles per DEC tick */ 213 cpu_timebase = ticks_per_sec; 214 cpu_initclocks(); 215 216 /* 217 * Initialize the BAT registers 218 */ 219 oea_batinit( 220 PMPPC_FLASH_BASE, BAT_BL_256M, /* flash (etc) memory 256M area */ 221 CPC_PCI_MEM_BASE, BAT_BL_256M, /* PCI memory 256M area */ 222 CPC_PCI_IO_BASE, BAT_BL_128M, /* PCI I/O 128M area */ 223 0); 224 225 /* 226 * Set up trap vectors 227 */ 228 oea_init(NULL); 229 230 /* 231 * Set up console. 232 */ 233 consinit(); /* XXX should not be here */ 234 235 printf("console set up\n"); 236 237 /* 238 * Set the page size. 239 */ 240 uvm_setpagesize(); 241 242 /* 243 * Initialize pmap module. 244 */ 245 pmap_bootstrap(startkernel, endkernel); 246 247 #ifdef IPKDB 248 /* 249 * Now trap to IPKDB 250 */ 251 ipkdb_init(); 252 if (boothowto & RB_KDB) 253 ipkdb_connect(0); 254 #endif 255 #ifdef KGDB 256 kgdb_port_init(); 257 if (boothowto & RB_KDB) { 258 kgdb_debug_init = 1; 259 kgdb_connect(1); 260 } 261 #endif 262 } 263 264 void 265 mem_regions(struct mem_region **mem, struct mem_region **avail) 266 { 267 *mem = physmemr; 268 *avail = availmemr; 269 } 270 271 /* 272 * Machine dependent startup code. 273 */ 274 void 275 cpu_startup(void) 276 { 277 278 oea_startup(NULL); 279 280 /* 281 * Now that we have VM, malloc()s are OK in bus_space. 282 */ 283 bus_space_mallocok(); 284 285 /* Set up the PCI bus tag. */ 286 if (bus_space_init(&pmppc_pci_io_tag, "pcimem", NULL, 0)) 287 panic("bus_space_init pci failed"); 288 289 /* Set up interrupt controller */ 290 cpc700_init_intr(&pmppc_mem_tag, CPC_UIC_BASE, 291 CPC_INTR_MASK(PMPPC_I_ETH_INT), 0); 292 293 pic_init(); 294 (void)setup_cpc700(); 295 oea_install_extint(pic_ext_intr); 296 297 #if 0 298 /* XXX doesn't seem to be needed anymore */ 299 /* 300 * Now allow hardware interrupts. 301 */ 302 __asm volatile ("mfmsr %0; ori %0,%0,%1; mtmsr %0" 303 : "=r"(msr) : "K"(PSL_EE)); 304 #endif 305 } 306 307 /* 308 * consinit 309 * Initialize system console. 310 */ 311 void 312 consinit(void) 313 { 314 static int initted; 315 #if (NCOM > 0) 316 bus_space_tag_t tag; 317 #endif 318 319 if (initted) 320 return; 321 initted = 1; 322 323 #if (NCOM > 0) 324 tag = &pmppc_mem_tag; 325 326 if(comcnattach(tag, CPC_COM0, 9600, CPC_COM_SPEED(a_config.a_bus_freq), 327 COM_TYPE_NORMAL, 328 ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8))) 329 panic("can't init serial console"); 330 else 331 return; 332 #endif 333 334 panic("console device missing -- serial console not in kernel"); 335 /* Of course, this is moot if there is no console... */ 336 } 337 338 #ifdef KGDB 339 void 340 kgdb_port_init(void) 341 { 342 #if (NCOM > 0) 343 if(!strcmp(kgdb_devname, "com")) { 344 bus_space_tag_t tag = &pmppc_mem_tag; 345 com_kgdb_attach(tag, comkgdbaddr, comkgdbrate, 346 CPC_COM_SPEED(a_config.a_bus_freq), 347 COM_TYPE_NORMAL, comkgdbmode); 348 } 349 #endif 350 } 351 #endif 352 353 /* 354 * Halt or reboot the machine after syncing/dumping according to howto. 355 */ 356 void 357 cpu_reboot(int howto, char *what) 358 { 359 static int syncing; 360 static char str[256]; 361 char *ap = str, *ap1 = ap; 362 extern void disable_intr(void); 363 364 boothowto = howto; 365 if (!cold && !(howto & RB_NOSYNC) && !syncing) { 366 syncing = 1; 367 vfs_shutdown(); /* sync */ 368 resettodr(); /* set wall clock */ 369 } 370 splhigh(); 371 if (howto & RB_HALT) { 372 doshutdownhooks(); 373 pmf_system_shutdown(boothowto); 374 printf("halted\n\n"); 375 while(1); 376 } 377 if (!cold && (howto & RB_DUMP)) 378 oea_dumpsys(); 379 doshutdownhooks(); 380 381 pmf_system_shutdown(boothowto); 382 printf("rebooting\n\n"); 383 if (what && *what) { 384 if (strlen(what) > sizeof str - 5) 385 printf("boot string too large, ignored\n"); 386 else { 387 strcpy(str, what); 388 ap1 = ap = str + strlen(str); 389 *ap++ = ' '; 390 } 391 } 392 *ap++ = '-'; 393 if (howto & RB_SINGLE) 394 *ap++ = 's'; 395 if (howto & RB_KDB) 396 *ap++ = 'd'; 397 *ap++ = 0; 398 if (ap[-2] == '-') 399 *ap1 = 0; 400 401 disable_intr(); 402 403 /* Write the two byte reset sequence to the reset register. */ 404 out8(PMPPC_RESET, PMPPC_RESET_SEQ_STEP1); 405 out8(PMPPC_RESET, PMPPC_RESET_SEQ_STEP2); 406 407 while (1); 408 } 409 410 void 411 setleds(int leds) 412 { 413 out8(PMPPC_LEDS, leds); 414 } 415 416 void 417 pmppc_setup(void) 418 { 419 uint config0, config1; 420 421 config0 = in8(PMPPC_CONFIG0); 422 config1 = in8(PMPPC_CONFIG1); 423 424 /* from page 2-8 in the Artesyn User's manual */ 425 a_config.a_boot_device = config1 & 0x80 ? A_BOOT_FLASH : A_BOOT_ROM; 426 a_config.a_has_ecc = (config1 & 0x40) != 0; 427 switch (config1 & 0x30) { 428 case 0x00: a_config.a_mem_size = 32 * 1024 * 1024; break; 429 case 0x10: a_config.a_mem_size = 64 * 1024 * 1024; break; 430 case 0x20: a_config.a_mem_size = 128 * 1024 * 1024; break; 431 case 0x30: a_config.a_mem_size = 256 * 1024 * 1024; break; 432 } 433 a_config.a_l2_cache = (config1 >> 2) & 3; 434 switch (config1 & 0x03) { 435 case 0x00: a_config.a_bus_freq = 66666666; break; 436 case 0x01: a_config.a_bus_freq = 83333333; break; 437 case 0x02: a_config.a_bus_freq = 100000000; break; 438 case 0x03: a_config.a_bus_freq = 0; break; /* XXX */ 439 } 440 a_config.a_is_monarch = (config0 & 0x80) == 0; 441 a_config.a_has_eth = (config0 & 0x20) != 0; 442 a_config.a_has_rtc = (config0 & 0x10) == 0; 443 switch (config0 & 0x0c) { 444 case 0x00: a_config.a_flash_size = 256 * 1024 * 1024; break; 445 case 0x04: a_config.a_flash_size = 128 * 1024 * 1024; break; 446 case 0x08: a_config.a_flash_size = 64 * 1024 * 1024; break; 447 case 0x0c: a_config.a_flash_size = 32 * 1024 * 1024; break; 448 } 449 switch (config0 & 0x03) { 450 case 0x00: a_config.a_flash_width = 64; break; 451 case 0x01: a_config.a_flash_width = 32; break; 452 case 0x02: a_config.a_flash_width = 16; break; 453 case 0x03: a_config.a_flash_width = 0; break; 454 } 455 } 456
Indexes created Tue Sep 30 20:09:53 GMT 2025