autoconf.c revision 1.10 1 /* $NetBSD: autoconf.c,v 1.10 2006/02/18 05:04:11 thorpej Exp $ */
2
3 /*
4 * Copyright (C) 1995, 1996 Wolfgang Solfrank.
5 * Copyright (C) 1995, 1996 TooLs GmbH.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by TooLs GmbH.
19 * 4. The name of TooLs GmbH may not be used to endorse or promote products
20 * derived from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
27 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
28 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
29 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
30 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
31 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 */
33
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.10 2006/02/18 05:04:11 thorpej Exp $");
36
37 #include <sys/param.h>
38 #include <sys/conf.h>
39 #include <sys/device.h>
40 #include <sys/systm.h>
41
42 #include <dev/ic/comreg.h> /* For COM_FREQ */
43
44 #include <powerpc/ibm4xx/dcr405gp.h>
45 #include <powerpc/ibm4xx/dev/plbvar.h>
46
47 /*
48 * List of port-specific devices to attach to the processor local bus.
49 */
50 static const struct plb_dev local_plb_devs [] = {
51 { "pbus", },
52 { NULL }
53 };
54
55 /*
56 * Determine device configuration for a machine.
57 */
58 void
59 cpu_configure(void)
60 {
61
62 intr_init();
63 calc_delayconst();
64
65 /* Make sure that timers run at CPU frequency */
66 mtdcr(DCR_CPC0_CR1, mfdcr(DCR_CPC0_CR1) & ~CPC0_CR1_CETE);
67
68 if (config_rootfound("plb", &local_plb_devs) == NULL)
69 panic("configure: plb not configured");
70
71 printf("biomask %x netmask %x ttymask %x\n", (u_short)imask[IPL_BIO],
72 (u_short)imask[IPL_NET], (u_short)imask[IPL_TTY]);
73
74 (void)spl0();
75
76 /*
77 * Now allow hardware interrupts.
78 */
79 __asm volatile ("wrteei 1");
80 }
81
82 /*
83 * Setup root device.
84 * Configure swap area.
85 */
86 void
87 cpu_rootconf(void)
88 {
89
90 setroot(booted_device, booted_partition);
91 }
92
93 void
94 device_register(struct device *dev, void *aux)
95 {
96 struct device *parent = dev->dv_parent;
97
98 if (strcmp(dev->dv_cfdata->cf_name, "com") == 0 &&
99 strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
100 /* Set the frequency of the on-chip UART. */
101 int freq = COM_FREQ * 6;
102
103 if (devprop_set(dev, "frequency",
104 &freq, sizeof(freq), PROP_INT, 0) != 0)
105 printf("WARNING: unable to set frequency "
106 "property for %s\n", dev->dv_xname);
107 return;
108 }
109
110 if (strcmp(dev->dv_cfdata->cf_name, "emac") == 0 &&
111 strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
112 /* Set the mac-addr of the on-chip Ethernet. */
113 /* XXX 405GP only has one; what about CPUs with two? */
114 if (devprop_set(dev, "mac-addr",
115 &board_data.mac_address_local,
116 sizeof(board_data.mac_address_local),
117 PROP_CONST, 0) != 0)
118 printf("WARNING: unable to set mac-addr "
119 "property for %s\n", dev->dv_xname);
120 return;
121 }
122 }
123