xref: /src/sys/arch/ews4800mips/sbd/if_iee_sbdio.c

/*	$NetBSD: if_iee_sbdio.c,v 1.9 2009/05/10 04:26:19 tsutsui Exp $	*/

/*
 * Copyright (c) 2003 Jochen Kunz.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of Jochen Kunz may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY JOCHEN KUNZ
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL JOCHEN KUNZ
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_iee_sbdio.c,v 1.9 2009/05/10 04:26:19 tsutsui Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>

#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#include <sys/socket.h>
#include <sys/mbuf.h>

#include <mips/cache.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/sbdvar.h>	/* for ether_addr() */
#include <machine/sbdiovar.h>

#include <dev/ic/i82596reg.h>
#include <dev/ic/i82596var.h>

int iee_sbdio_match(device_t, cfdata_t, void *);
void iee_sbdio_attach(device_t, device_t, void *);
int iee_sbdio_cmd(struct iee_softc *, uint32_t);
int iee_sbdio_reset(struct iee_softc *);

static void iee_sbdio_channel_attention(void *);
static void iee_sbdio_chip_reset(void *);
static void iee_sbdio_set_scp(void *, uint32_t);

struct iee_sbdio_softc {
	struct iee_softc sc_iee;
	volatile uint32_t *sc_port;	/* CPU <-> i82596 interface */
};

CFATTACH_DECL_NEW(iee_sbdio, sizeof(struct iee_sbdio_softc),
    iee_sbdio_match, iee_sbdio_attach, NULL, NULL);

int
iee_sbdio_match(device_t parent, cfdata_t cf, void *aux)
{
	struct sbdio_attach_args *sa = aux;

	return strcmp(sa->sa_name, "iee") ? 0 : 1;
}

void
iee_sbdio_attach(device_t parent, device_t self, void *aux)
{
	struct iee_sbdio_softc *sc_ssc = device_private(self);
	struct iee_softc *sc = &sc_ssc->sc_iee;
	struct sbdio_attach_args *sa = aux;
	uint8_t eaddr[ETHER_ADDR_LEN];
	int media[2];

	sc->sc_dev = self;
	sc_ssc->sc_port =
	    (volatile uint32_t *)MIPS_PHYS_TO_KSEG1(sa->sa_addr1);
	sc->sc_type = I82596_CA;
	sc->sc_flags = IEE_NEED_SWAP;

	/* bus_dma round the dma size to page size. */
	sc->sc_cl_align = 1;

	sc->sc_dmat = sa->sa_dmat;

	/* Setup SYSBUS byte. TR2 specific? -uch */
	sc->sc_sysbus = IEE_SYSBUS_BE | IEE_SYSBUS_INT |
	    IEE_SYSBUS_LIEAR | IEE_SYSBUS_STD;

	sc->sc_iee_reset = iee_sbdio_reset;
	sc->sc_iee_cmd = iee_sbdio_cmd;
	sc->sc_mediachange = NULL;
	sc->sc_mediastatus = NULL;

	media[0] = IFM_ETHER | IFM_MANUAL;
	media[1] = IFM_ETHER | IFM_10_5;

	intr_establish(sa->sa_irq, iee_intr, sc);
	(*platform.ether_addr)(eaddr);
	iee_attach(sc, eaddr, media, 2, IFM_ETHER | IFM_10_5);
}

int
iee_sbdio_cmd(struct iee_softc *sc, uint32_t cmd)
{
	int retry = 8;
	int n;
	uint32_t ack;

	SC_SCB(sc)->scb_cmd = cmd;
	IEE_SCBSYNC(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);

	iee_sbdio_channel_attention(sc);

	/* Wait for the cmd to finish */
	for (n = 0 ; n < retry; n++) {
		IEE_SCBSYNC(sc, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
		ack = SC_SCB(sc)->scb_cmd;
		IEE_SCBSYNC(sc, BUS_DMASYNC_PREREAD);
		if (ack == 0)
			break;
		delay(1);
	}
	if (n < retry)
		return 0;

	printf("%s: command timeout. retry=%d\n",
	    device_xname(sc->sc_dev), retry);

	return -1;
}

int
iee_sbdio_reset(struct iee_softc *sc)
{
#define	IEE_ISCP_BUSSY 0x1
	int n, retry = 8;
	uint32_t cmd, ack;

	/* Make sure the busy byte is set and the cache is flushed. */
	SC_ISCP(sc)->iscp_bussy = IEE_ISCP_BUSSY;
	IEE_ISCPSYNC(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);

	/* Setup the PORT Command with pointer to SCP. */
	cmd = IEE_PORT_SCP | IEE_PHYS_SHMEM(sc->sc_scp_off);

	/* Initiate a Hardware reset. */
	printf("%s: reseting chip... ", device_xname(sc->sc_dev));
	iee_sbdio_chip_reset(sc);

	/* Set SCP address to CU */
	iee_sbdio_set_scp(sc, cmd);

	/* Wait for the chip to initialize and read SCP and ISCP. */
	for (n = 0 ; n < retry; n++) {
		IEE_ISCPSYNC(sc, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
		ack = SC_ISCP(sc)->iscp_bussy;
		IEE_ISCPSYNC(sc, BUS_DMASYNC_PREREAD);
		if (ack != IEE_ISCP_BUSSY) {
			break;
		}
		delay(100);
	}

	if (n < retry) {
		/* ACK interrupts we may have caused */
		sc->sc_iee_cmd(sc, IEE_SCB_ACK);
		printf("done.\n");

		return 0;
	}
	printf("time out.\n");

	return -1;
}

static void
iee_sbdio_channel_attention(void *cookie)
{
	struct iee_sbdio_softc *sc = cookie;
	uint32_t dummy;

	/* Issue a Channel Attention */
	dummy = *sc->sc_port;
	dummy = *sc->sc_port;
}

static void
iee_sbdio_chip_reset(void *cookie)
{
	struct iee_sbdio_softc *sc = cookie;

	*sc->sc_port = 0;
	*sc->sc_port = 0;
	delay(10);
}

static void
iee_sbdio_set_scp(void *cookie, uint32_t cmd)
{
	struct iee_sbdio_softc *sc = cookie;
	cmd = (cmd << 16) | (cmd >> 16);

	*sc->sc_port = cmd;
	*sc->sc_port = cmd;

	/* Issue a Channel Attention to read SCP */
	iee_sbdio_channel_attention(cookie);
}