wrap030_machdep.c revision 1.1 1 /* $NetBSD: wrap030_machdep.c,v 1.1 2026/08/06 14:41:09 thorpej Exp $ */
2
3 /*-
4 * Copyright (c) 2026 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: wrap030_machdep.c,v 1.1 2026/08/06 14:41:09 thorpej Exp $");
34
35 #include <sys/param.h>
36 #include <sys/bus.h>
37 #include <sys/device.h>
38
39 #include <dev/fdt/fdtvar.h>
40 #include <dev/fdt/fdt_platform.h>
41
42 #include <uvm/uvm_extern.h>
43
44 #include <m68k/mmu_30.h>
45
46 /*
47 * plat_bootstrap --
48 * Early bootstrap routine, mainly for the purpose of providing
49 * data necessary to configure the MMU.
50 */
51 static paddr_t
52 wrap030_plat_bootstrap(paddr_t nextpa, vaddr_t reloff)
53 {
54 /*
55 * We're going to use TT0 to map all of the device address space,
56 * which is located >= 0x80000000. We have to:
57 *
58 * - Initialize the TT register data.
59 * and
60 * - Tell pmap_bootstrap1() about the TT-mapped region.
61 */
62 uint32_t *tt = (uint32_t *)PMAP_BOOTSTRAP_RELOC_GLOB(mmu_tt30);
63 tt[MMU_TTREG_TT0] =
64 0x80000000 |
65 __SHIFTIN(0x7f,TT30_LAM) |
66 TT30_E | TT30_CI | TT30_RWM |
67 TT30_SUPERD;
68
69 struct pmap_bootmap *pmbm =
70 (struct pmap_bootmap *)PMAP_BOOTSTRAP_RELOC_GLOB(machine_bootmap);
71 pmbm[0].pmbm_vaddr = 0x80000000;
72 pmbm[0].pmbm_size = 0x80000000;
73 pmbm[0].pmbm_flags = PMBM_F_KEEPOUT;
74
75 return nextpa;
76 }
77
78 /*
79 * plat_uart_freq --
80 * Return the console UART clock frequency in Hz. This is
81 * called if the information is not available in the device
82 * tree.
83 */
84 static u_int
85 wrap030_plat_uart_freq(void)
86 {
87 return 1843200;
88 }
89
90 static const struct fdt_platform wrap030_platform = {
91 .fp_bootstrap = wrap030_plat_bootstrap,
92 .fp_uart_freq = wrap030_plat_uart_freq,
93 };
94 FDT_PLATFORM(wrap030, "techav,wrap030", &wrap030_platform);
95