Makefile.hp300 revision 1.26.2.1
1 # $NetBSD: Makefile.hp300,v 1.26.2.1 1995/10/18 22:51:59 thorpej Exp $ 2 3 # @(#)Makefile.hp300 8.2 (Berkeley) 1/23/94 4 # 5 # Makefile for NetBSD 6 # 7 # This makefile is constructed from a machine description: 8 # config machineid 9 # Most changes should be made in the machine description 10 # /sys/arch/hp300/conf/``machineid'' 11 # after which you should do 12 # config machineid 13 # Machine generic makefile changes should be made in 14 # /sys/arch/hp300/conf/Makefile.hp300 15 # after which config should be rerun for all machines of that type. 16 # 17 # N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE 18 # IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING 19 # 20 # -DTRACE compile in kernel tracing hooks 21 # -DQUOTA compile in file system quotas 22 23 24 # DEBUG is set to -g by config if debugging is requested (config -g). 25 # PROF is set to -pg by config if profiling is requested (config -p). 26 AS= as ${DEBUG} 27 AWK= awk 28 CC= cc ${DEBUG} 29 CPP= cpp 30 LD= ld 31 TOUCH= touch -f -c 32 33 # source tree is located via $S relative to the compilation directory 34 S= ../../../.. 35 HP300= ../.. 36 37 INCLUDES= -I. -I$S/arch -I$S -I$S/sys 38 COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -Dmc68020 -Dhp300 -DFPCOPROC 39 CFLAGS= -O6 -Werror -fno-builtin ${COPTS} 40 41 ### find out what to use for libkern 42 .include "$S/lib/libkern/Makefile.inc" 43 .ifndef PROF 44 LIBKERN= ${KERNLIB} 45 .else 46 LIBKERN= ${KERNLIB_PROF} 47 .endif 48 49 ### find out what to use for libcompat 50 .include "$S/compat/common/Makefile.inc" 51 .ifndef PROF 52 LIBCOMPAT= ${COMPATLIB} 53 .else 54 LIBCOMPAT= ${COMPATLIB_PROF} 55 .endif 56 57 ### for the Motorola 68040 Floating Point Software Product 58 .include "$S/arch/m68k/fpsp/Makefile.inc" 59 60 # compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP} 61 # where TYPE is NORMAL, DRIVER, or PROFILE}; SUFFIX is the file suffix, 62 # capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file 63 # is marked as config-dependent. 64 65 NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $< 66 NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< 67 68 DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $< 69 DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< 70 71 PROFILE_C= ${CC} -S -c ${COPTS} $<; \ 72 sed -e s/_mcount/mcount/ -e s/subrmcount/subr_mcount/ <$*.s | \ 73 ${AS} -o $@; \ 74 rm -f $*.s 75 76 NORMAL_S= ${CPP} ${COPTS} $< | ${AS} -o $@ 77 NORMAL_S_C= ${CPP} ${COPTS} ${PARAM} $< | ${AS} -o $@ 78 79 %OBJS 80 81 %CFILES 82 83 # load lines for config "xxx" will be emitted as: 84 # xxx: ${SYSTEM_DEP} swapxxx.o 85 # ${SYSTEM_LD_HEAD} 86 # ${SYSTEM_LD} swapxxx.o 87 # ${SYSTEM_LD_TAIL} 88 SYSTEM_OBJ= locore.o ${FPSP} vnode_if.o ${OBJS} param.o ioconf.o \ 89 ${LIBKERN} ${LIBCOMPAT} 90 SYSTEM_DEP= Makefile ${SYSTEM_OBJ} 91 SYSTEM_LD_HEAD= rm -f $@ 92 SYSTEM_LD= -@if [ X${DEBUG} = X-g ]; \ 93 then strip=-X; \ 94 else strip=-x; \ 95 fi; \ 96 echo ${LD} $$strip -n -T 0 -o $@ -e start '$${SYSTEM_OBJ}' vers.o; \ 97 ${LD} $$strip -n -T 0 -o $@ -e start ${SYSTEM_OBJ} vers.o 98 SYSTEM_LD_TAIL= @size $@; chmod 755 $@; \ 99 [ X${DEBUG} = X-g ] && { \ 100 echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \ 101 echo strip -d $@; strip -d $@; } || true 102 103 %LOAD 104 105 vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP} 106 sh $S/conf/newvers.sh 107 ${CC} ${CFLAGS} -c vers.c 108 109 clean:: 110 rm -f eddep *netbsd netbsd.gdb tags vnode_if.[ch] *.o locore.i \ 111 [a-z]*.s [Ee]rrs linterrs makelinks genassym 112 113 lint: /tmp param.c 114 @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \ 115 ${HP300}/hp300/Locore.c ${CFILES} ${HP300}/hp300/swapgeneric.c \ 116 ioconf.c param.c | \ 117 grep -v 'struct/union .* never defined' | \ 118 grep -v 'possible pointer alignment problem' 119 120 locore.o: assym.s ${HP300}/hp300/vectors.s ${HP300}/hp300/locore.s 121 locore.o: ${HP300}/include/trap.h ${HP300}/include/psl.h ${HP300}/include/pte.h 122 locore.o: ${HP300}/include/cpu.h 123 ${CPP} -DLOCORE ${COPTS} ${HP300}/hp300/locore.s | ${AS} -o locore.o 124 125 # the following is necessary because autoconf.o depends on #if GENERIC 126 autoconf.o: Makefile 127 128 # the following are necessary because the files depend on the types of 129 # hp cpu's included in the system configuration 130 machdep.o sys_machdep.o pmap.o pmap_bootstrap.o trap.o dma.o: Makefile 131 132 # depend on network or filesystem configuration 133 uipc_proto.o vfs_conf.o locore.o: Makefile 134 135 # depend on maxusers 136 assym.s: Makefile 137 138 assym.s: genassym 139 ./genassym >assym.s 140 141 genassym: ${HP300}/hp300/genassym.c Makefile 142 ${CC} ${INCLUDES} ${IDENT} ${PARAM} -Dmc68020 -Dhp300 -o genassym \ 143 ${HP300}/hp300/genassym.c 144 145 depend: assym.s param.c vnode_if.h 146 mkdep ${COPTS} ${CFILES} ioconf.c param.c 147 mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${HP300}/hp300/genassym.c 148 149 links: 150 egrep '#if' ${CFILES} | sed -f $S/conf/defines | \ 151 sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink 152 echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \ 153 sort -u | comm -23 - dontlink | \ 154 sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks 155 sh makelinks && rm -f dontlink 156 157 tags: 158 @echo "see $S/kern/Makefile for tags" 159 160 ioconf.o: ioconf.c 161 ${CC} -c ${CFLAGS} ioconf.c 162 163 param.c: $S/conf/param.c 164 rm -f param.c 165 cp $S/conf/param.c . 166 167 param.o: param.c Makefile 168 ${CC} -c ${CFLAGS} ${PARAM} param.c 169 170 vnode_if.c vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src 171 AWK="${AWK}" sh $S/kern/vnode_if.sh $S/kern/vnode_if.src 172 173 %RULES 174
Indexes created Wed Oct 29 03:09:52 GMT 2025