cpu.h revision 1.41.2.4
1 /* $NetBSD: cpu.h,v 1.41.2.4 2004/09/21 13:15:26 skrll Exp $ */ 2 3 /* 4 * Copyright (c) 1982, 1990, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * the Systems Programming Group of the University of Utah Computer 9 * Science Department. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * from: Utah $Hdr: cpu.h 1.16 91/03/25$ 36 * 37 * @(#)cpu.h 8.4 (Berkeley) 1/5/94 38 */ 39 /* 40 * Copyright (c) 1988 University of Utah. 41 * 42 * This code is derived from software contributed to Berkeley by 43 * the Systems Programming Group of the University of Utah Computer 44 * Science Department. 45 * 46 * Redistribution and use in source and binary forms, with or without 47 * modification, are permitted provided that the following conditions 48 * are met: 49 * 1. Redistributions of source code must retain the above copyright 50 * notice, this list of conditions and the following disclaimer. 51 * 2. Redistributions in binary form must reproduce the above copyright 52 * notice, this list of conditions and the following disclaimer in the 53 * documentation and/or other materials provided with the distribution. 54 * 3. All advertising materials mentioning features or use of this software 55 * must display the following acknowledgement: 56 * This product includes software developed by the University of 57 * California, Berkeley and its contributors. 58 * 4. Neither the name of the University nor the names of its contributors 59 * may be used to endorse or promote products derived from this software 60 * without specific prior written permission. 61 * 62 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 63 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 64 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 65 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 66 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 67 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 68 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 69 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 70 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 71 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 72 * SUCH DAMAGE. 73 * 74 * from: Utah $Hdr: cpu.h 1.16 91/03/25$ 75 * 76 * @(#)cpu.h 8.4 (Berkeley) 1/5/94 77 */ 78 79 #ifndef _HP300_CPU_H_ 80 #define _HP300_CPU_H_ 81 82 #if defined(_KERNEL_OPT) 83 #include "opt_lockdebug.h" 84 #endif 85 86 /* 87 * Exported definitions unique to hp300/68k cpu support. 88 */ 89 90 /* 91 * Get common m68k CPU definitions. 92 */ 93 #include <m68k/cpu.h> 94 #include <machine/hp300spu.h> 95 96 /* 97 * Get interrupt glue. 98 */ 99 #include <machine/intr.h> 100 101 #include <sys/sched.h> 102 struct cpu_info { 103 struct schedstate_percpu ci_schedstate; /* scheduler state */ 104 #if defined(DIAGNOSTIC) || defined(LOCKDEBUG) 105 u_long ci_spin_locks; /* # of spin locks held */ 106 u_long ci_simple_locks; /* # of simple locks held */ 107 #endif 108 }; 109 110 #ifdef _KERNEL 111 extern struct cpu_info cpu_info_store; 112 113 #define curcpu() (&cpu_info_store) 114 115 /* 116 * definitions of cpu-dependent requirements 117 * referenced in generic code 118 */ 119 #define cpu_swapin(p) /* nothing */ 120 #define cpu_swapout(p) /* nothing */ 121 #define cpu_number() 0 122 123 void cpu_proc_fork(struct proc *, struct proc *); 124 125 /* 126 * Arguments to hardclock and gatherstats encapsulate the previous 127 * machine state in an opaque clockframe. One the hp300, we use 128 * what the hardware pushes on an interrupt (frame format 0). 129 */ 130 struct clockframe { 131 u_short sr; /* sr at time of interrupt */ 132 u_long pc; /* pc at time of interrupt */ 133 u_short vo; /* vector offset (4-word frame) */ 134 }; 135 136 #define CLKF_USERMODE(framep) (((framep)->sr & PSL_S) == 0) 137 #define CLKF_BASEPRI(framep) (((framep)->sr & PSL_IPL) == 0) 138 #define CLKF_PC(framep) ((framep)->pc) 139 #if 0 140 /* We would like to do it this way... */ 141 #define CLKF_INTR(framep) (((framep)->sr & PSL_M) == 0) 142 #else 143 /* but until we start using PSL_M, we have to do this instead */ 144 #define CLKF_INTR(framep) (0) /* XXX */ 145 #endif 146 147 148 /* 149 * Preempt the current process if in interrupt from user mode, 150 * or after the current trap/syscall if in system mode. 151 */ 152 extern int want_resched; /* resched() was called */ 153 #define need_resched(ci) { want_resched++; aston(); } 154 155 /* 156 * Give a profiling tick to the current process when the user profiling 157 * buffer pages are invalid. On the hp300, request an ast to send us 158 * through trap, marking the proc as needing a profiling tick. 159 */ 160 #define need_proftick(p) { (p)->p_flag |= P_OWEUPC; aston(); } 161 162 /* 163 * Notify the current process (p) that it has a signal pending, 164 * process as soon as possible. 165 */ 166 #define signotify(p) aston() 167 168 extern int astpending; /* need to trap before returning to user mode */ 169 #define aston() (astpending++) 170 171 #endif /* _KERNEL */ 172 173 /* 174 * CTL_MACHDEP definitions. 175 */ 176 #define CPU_CONSDEV 1 /* dev_t: console terminal device */ 177 #define CPU_MAXID 2 /* number of valid machdep ids */ 178 179 #define CTL_MACHDEP_NAMES { \ 180 { 0, 0 }, \ 181 { "console_device", CTLTYPE_STRUCT }, \ 182 } 183 184 /* 185 * The rest of this should probably be moved to <machine/hp300spu.h>, 186 * although some of it could probably be put into generic 68k headers. 187 */ 188 189 #ifdef _KERNEL 190 extern char *intiobase, *intiolimit; 191 extern void (*vectab[])(void); 192 193 struct frame; 194 struct fpframe; 195 struct pcb; 196 197 /* locore.s functions */ 198 void m68881_save(struct fpframe *); 199 void m68881_restore(struct fpframe *); 200 int suline(caddr_t, caddr_t); 201 void savectx(struct pcb *); 202 void switch_exit(struct lwp *); 203 void switch_lwp_exit(struct lwp *); 204 void proc_trampoline(void); 205 void loadustp(int); 206 207 void doboot(void) __attribute__((__noreturn__)); 208 void ecacheon(void); 209 void ecacheoff(void); 210 211 /* clock.c functions */ 212 void hp300_calibrate_delay(void); 213 214 /* machdep.c functions */ 215 int badaddr(caddr_t); 216 int badbaddr(caddr_t); 217 218 /* sys_machdep.c functions */ 219 int cachectl1(unsigned long, vaddr_t, size_t, struct proc *); 220 221 /* vm_machdep.c functions */ 222 void physaccess(caddr_t, caddr_t, int, int); 223 void physunaccess(caddr_t, int); 224 int kvtop(caddr_t); 225 226 /* what is this supposed to do? i.e. how is it different than startrtclock? */ 227 #define enablertclock() 228 229 #endif 230 231 /* physical memory sections */ 232 #define ROMBASE (0x00000000) 233 #define INTIOBASE (0x00400000) 234 #define INTIOTOP (0x00600000) 235 #define EXTIOBASE (0x00600000) 236 #define EXTIOTOP (0x20000000) 237 #define MAXADDR (0xFFFFF000) 238 239 /* 240 * Internal IO space: 241 * 242 * Ranges from 0x400000 to 0x600000 (IIOMAPSIZE). 243 * 244 * Internal IO space is mapped in the kernel from ``intiobase'' to 245 * ``intiolimit'' (defined in locore.s). Since it is always mapped, 246 * conversion between physical and kernel virtual addresses is easy. 247 */ 248 #define ISIIOVA(va) \ 249 ((char *)(va) >= intiobase && (char *)(va) < intiolimit) 250 #define IIOV(pa) ((int)(pa)-INTIOBASE+(int)intiobase) 251 #define IIOP(va) ((int)(va)-(int)intiobase+INTIOBASE) 252 #define IIOPOFF(pa) ((int)(pa)-INTIOBASE) 253 #define IIOMAPSIZE btoc(INTIOTOP-INTIOBASE) /* 2mb */ 254 255 /* 256 * External IO space: 257 * 258 * DIO ranges from select codes 0-63 at physical addresses given by: 259 * 0x600000 + (sc - 32) * 0x10000 260 * DIO cards are addressed in the range 0-31 [0x600000-0x800000) for 261 * their control space and the remaining areas, [0x200000-0x400000) and 262 * [0x800000-0x1000000), are for additional space required by a card; 263 * e.g. a display framebuffer. 264 * 265 * DIO-II ranges from select codes 132-255 at physical addresses given by: 266 * 0x1000000 + (sc - 132) * 0x400000 267 * The address range of DIO-II space is thus [0x1000000-0x20000000). 268 * 269 * DIO/DIO-II space is too large to map in its entirety, instead devices 270 * are mapped into kernel virtual address space allocated from a range 271 * of EIOMAPSIZE pages (vmparam.h) starting at ``extiobase''. 272 */ 273 #define DIOBASE (0x600000) 274 #define DIOTOP (0x1000000) 275 #define DIOCSIZE (0x10000) 276 #define DIOIIBASE (0x01000000) 277 #define DIOIITOP (0x20000000) 278 #define DIOIICSIZE (0x00400000) 279 280 /* 281 * HP MMU 282 */ 283 #define MMUBASE IIOPOFF(0x5F4000) 284 #define MMUSSTP 0x0 285 #define MMUUSTP 0x4 286 #define MMUTBINVAL 0x8 287 #define MMUSTAT 0xC 288 #define MMUCMD MMUSTAT 289 290 #define MMU_UMEN 0x0001 /* enable user mapping */ 291 #define MMU_SMEN 0x0002 /* enable supervisor mapping */ 292 #define MMU_CEN 0x0004 /* enable data cache */ 293 #define MMU_BERR 0x0008 /* bus error */ 294 #define MMU_IEN 0x0020 /* enable instruction cache */ 295 #define MMU_FPE 0x0040 /* enable 68881 FP coprocessor */ 296 #define MMU_WPF 0x2000 /* write protect fault */ 297 #define MMU_PF 0x4000 /* page fault */ 298 #define MMU_PTF 0x8000 /* page table fault */ 299 300 #define MMU_FAULT (MMU_PTF|MMU_PF|MMU_WPF|MMU_BERR) 301 #define MMU_ENAB (MMU_UMEN|MMU_SMEN|MMU_IEN|MMU_FPE) 302 303 #if defined(CACHE_HAVE_PAC) || defined(CACHE_HAVE_VAC) 304 #define M68K_CACHEOPS_MACHDEP 305 #endif 306 307 #ifdef CACHE_HAVE_PAC 308 #define M68K_CACHEOPS_MACHDEP_PCIA 309 #endif 310 311 #ifdef CACHE_HAVE_VAC 312 #define M68K_CACHEOPS_MACHDEP_DCIA 313 #define M68K_CACHEOPS_MACHDEP_DCIS 314 #define M68K_CACHEOPS_MACHDEP_DCIU 315 #define M68K_CACHEOPS_MACHDEP_TBIA 316 #define M68K_CACHEOPS_MACHDEP_TBIS 317 #define M68K_CACHEOPS_MACHDEP_TBIAS 318 #define M68K_CACHEOPS_MACHDEP_TBIAU 319 #endif 320 321 #endif /* _HP300_CPU_H_ */ 322
Indexes created Fri Oct 17 23:09:53 GMT 2025