cpu.h revision 1.54
1 /* $NetBSD: cpu.h,v 1.54 2007/05/21 16:37:03 tsutsui Exp $ */ 2 3 /* 4 * Copyright (c) 1982, 1990, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * the Systems Programming Group of the University of Utah Computer 9 * Science Department. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * from: Utah $Hdr: cpu.h 1.16 91/03/25$ 36 * 37 * @(#)cpu.h 8.4 (Berkeley) 1/5/94 38 */ 39 /* 40 * Copyright (c) 1988 University of Utah. 41 * 42 * This code is derived from software contributed to Berkeley by 43 * the Systems Programming Group of the University of Utah Computer 44 * Science Department. 45 * 46 * Redistribution and use in source and binary forms, with or without 47 * modification, are permitted provided that the following conditions 48 * are met: 49 * 1. Redistributions of source code must retain the above copyright 50 * notice, this list of conditions and the following disclaimer. 51 * 2. Redistributions in binary form must reproduce the above copyright 52 * notice, this list of conditions and the following disclaimer in the 53 * documentation and/or other materials provided with the distribution. 54 * 3. All advertising materials mentioning features or use of this software 55 * must display the following acknowledgement: 56 * This product includes software developed by the University of 57 * California, Berkeley and its contributors. 58 * 4. Neither the name of the University nor the names of its contributors 59 * may be used to endorse or promote products derived from this software 60 * without specific prior written permission. 61 * 62 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 63 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 64 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 65 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 66 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 67 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 68 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 69 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 70 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 71 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 72 * SUCH DAMAGE. 73 * 74 * from: Utah $Hdr: cpu.h 1.16 91/03/25$ 75 * 76 * @(#)cpu.h 8.4 (Berkeley) 1/5/94 77 */ 78 79 #ifndef _HP300_CPU_H_ 80 #define _HP300_CPU_H_ 81 82 #if defined(_KERNEL) 83 84 #if defined(_KERNEL_OPT) 85 #include "opt_lockdebug.h" 86 #endif 87 88 /* 89 * Exported definitions unique to hp300/68k cpu support. 90 */ 91 92 /* 93 * Get common m68k CPU definitions. 94 */ 95 #include <m68k/cpu.h> 96 #include <machine/hp300spu.h> 97 98 /* 99 * Get interrupt glue. 100 */ 101 #include <machine/intr.h> 102 103 #include <sys/cpu_data.h> 104 struct cpu_info { 105 struct cpu_data ci_data; /* MI per-cpu data */ 106 int ci_mtx_count; 107 int ci_mtx_oldspl; 108 int ci_want_resched; 109 }; 110 111 extern struct cpu_info cpu_info_store; 112 113 #define curcpu() (&cpu_info_store) 114 115 /* 116 * definitions of cpu-dependent requirements 117 * referenced in generic code 118 */ 119 #define cpu_swapin(p) /* nothing */ 120 #define cpu_swapout(p) /* nothing */ 121 #define cpu_number() 0 122 123 void cpu_proc_fork(struct proc *, struct proc *); 124 125 /* 126 * Arguments to hardclock and gatherstats encapsulate the previous 127 * machine state in an opaque clockframe. One the hp300, we use 128 * what the hardware pushes on an interrupt (frame format 0). 129 */ 130 struct clockframe { 131 u_short sr; /* sr at time of interrupt */ 132 u_long pc; /* pc at time of interrupt */ 133 u_short vo; /* vector offset (4-word frame) */ 134 }; 135 136 #define CLKF_USERMODE(framep) (((framep)->sr & PSL_S) == 0) 137 #define CLKF_PC(framep) ((framep)->pc) 138 #if 0 139 /* We would like to do it this way... */ 140 #define CLKF_INTR(framep) (((framep)->sr & PSL_M) == 0) 141 #else 142 /* but until we start using PSL_M, we have to do this instead */ 143 #define CLKF_INTR(framep) (0) /* XXX */ 144 #endif 145 146 147 /* 148 * Preempt the current process if in interrupt from user mode, 149 * or after the current trap/syscall if in system mode. 150 */ 151 #define cpu_need_resched(ci, flags) \ 152 do { ci->ci_want_resched = 1; aston(); } while (/* CONSTCOND */0) 153 154 /* 155 * Give a profiling tick to the current process when the user profiling 156 * buffer pages are invalid. On the hp300, request an ast to send us 157 * through trap, marking the proc as needing a profiling tick. 158 */ 159 #define cpu_need_proftick(l) \ 160 do { (l)->l_flag |= LP_OWEUPC; aston(); } while (/* CONSTCOND */0) 161 162 /* 163 * Notify the current process (p) that it has a signal pending, 164 * process as soon as possible. 165 */ 166 #define cpu_signotify(l) aston() 167 168 extern int astpending; /* need to trap before returning to user mode */ 169 #define aston() (astpending++) 170 171 #endif /* _KERNEL */ 172 173 /* 174 * CTL_MACHDEP definitions. 175 */ 176 #define CPU_CONSDEV 1 /* dev_t: console terminal device */ 177 #define CPU_MAXID 2 /* number of valid machdep ids */ 178 179 #define CTL_MACHDEP_NAMES { \ 180 { 0, 0 }, \ 181 { "console_device", CTLTYPE_STRUCT }, \ 182 } 183 184 /* 185 * The rest of this should probably be moved to <machine/hp300spu.h>, 186 * although some of it could probably be put into generic 68k headers. 187 */ 188 189 #ifdef _KERNEL 190 extern char *intiobase, *intiolimit, *extiobase; 191 extern void (*vectab[])(void); 192 193 struct fpframe; 194 195 /* locore.s functions */ 196 void m68881_save(struct fpframe *); 197 void m68881_restore(struct fpframe *); 198 int suline(void *, void *); 199 void loadustp(int); 200 201 void doboot(void) __attribute__((__noreturn__)); 202 void ecacheon(void); 203 void ecacheoff(void); 204 205 /* clock.c functions */ 206 void hp300_calibrate_delay(void); 207 208 /* machdep.c functions */ 209 int badaddr(void *); 210 int badbaddr(void *); 211 212 /* what is this supposed to do? i.e. how is it different than startrtclock? */ 213 #define enablertclock() 214 215 #endif 216 217 /* physical memory sections */ 218 #define ROMBASE (0x00000000) 219 #define INTIOBASE (0x00400000) 220 #define INTIOTOP (0x00600000) 221 #define EXTIOBASE (0x00600000) 222 #define EXTIOTOP (0x20000000) 223 #define MAXADDR (0xFFFFF000) 224 225 /* 226 * Internal IO space: 227 * 228 * Ranges from 0x400000 to 0x600000 (IIOMAPSIZE). 229 * 230 * Internal IO space is mapped in the kernel from ``intiobase'' to 231 * ``intiolimit'' (defined in locore.s). Since it is always mapped, 232 * conversion between physical and kernel virtual addresses is easy. 233 */ 234 #define ISIIOVA(va) \ 235 ((char *)(va) >= intiobase && (char *)(va) < intiolimit) 236 #define IIOV(pa) ((int)(pa)-INTIOBASE+(int)intiobase) 237 #define IIOP(va) ((int)(va)-(int)intiobase+INTIOBASE) 238 #define IIOPOFF(pa) ((int)(pa)-INTIOBASE) 239 #define IIOMAPSIZE btoc(INTIOTOP-INTIOBASE) /* 2mb */ 240 241 /* 242 * External IO space: 243 * 244 * DIO ranges from select codes 0-63 at physical addresses given by: 245 * 0x600000 + (sc - 32) * 0x10000 246 * DIO cards are addressed in the range 0-31 [0x600000-0x800000) for 247 * their control space and the remaining areas, [0x200000-0x400000) and 248 * [0x800000-0x1000000), are for additional space required by a card; 249 * e.g. a display framebuffer. 250 * 251 * DIO-II ranges from select codes 132-255 at physical addresses given by: 252 * 0x1000000 + (sc - 132) * 0x400000 253 * The address range of DIO-II space is thus [0x1000000-0x20000000). 254 * 255 * DIO/DIO-II space is too large to map in its entirety, instead devices 256 * are mapped into kernel virtual address space allocated from a range 257 * of EIOMAPSIZE pages (vmparam.h) starting at ``extiobase''. 258 */ 259 #define DIOBASE (0x600000) 260 #define DIOTOP (0x1000000) 261 #define DIOCSIZE (0x10000) 262 #define DIOIIBASE (0x01000000) 263 #define DIOIITOP (0x20000000) 264 #define DIOIICSIZE (0x00400000) 265 266 /* 267 * HP MMU 268 */ 269 #define MMUBASE IIOPOFF(0x5F4000) 270 #define MMUSSTP 0x0 271 #define MMUUSTP 0x4 272 #define MMUTBINVAL 0x8 273 #define MMUSTAT 0xC 274 #define MMUCMD MMUSTAT 275 276 #define MMU_UMEN 0x0001 /* enable user mapping */ 277 #define MMU_SMEN 0x0002 /* enable supervisor mapping */ 278 #define MMU_CEN 0x0004 /* enable data cache */ 279 #define MMU_BERR 0x0008 /* bus error */ 280 #define MMU_IEN 0x0020 /* enable instruction cache */ 281 #define MMU_FPE 0x0040 /* enable 68881 FP coprocessor */ 282 #define MMU_WPF 0x2000 /* write protect fault */ 283 #define MMU_PF 0x4000 /* page fault */ 284 #define MMU_PTF 0x8000 /* page table fault */ 285 286 #define MMU_FAULT (MMU_PTF|MMU_PF|MMU_WPF|MMU_BERR) 287 #define MMU_ENAB (MMU_UMEN|MMU_SMEN|MMU_IEN|MMU_FPE) 288 289 #if defined(CACHE_HAVE_PAC) || defined(CACHE_HAVE_VAC) 290 #define M68K_CACHEOPS_MACHDEP 291 #endif 292 293 #ifdef CACHE_HAVE_PAC 294 #define M68K_CACHEOPS_MACHDEP_PCIA 295 #endif 296 297 #ifdef CACHE_HAVE_VAC 298 #define M68K_CACHEOPS_MACHDEP_DCIA 299 #define M68K_CACHEOPS_MACHDEP_DCIS 300 #define M68K_CACHEOPS_MACHDEP_DCIU 301 #define M68K_CACHEOPS_MACHDEP_TBIA 302 #define M68K_CACHEOPS_MACHDEP_TBIS 303 #define M68K_CACHEOPS_MACHDEP_TBIAS 304 #define M68K_CACHEOPS_MACHDEP_TBIAU 305 #endif 306 307 #endif /* _HP300_CPU_H_ */ 308
Indexes created Sat Oct 18 08:10:09 GMT 2025