hilreg.h revision 1.1
1 /* $NetBSD: hilreg.h,v 1.1 2011/02/07 13:11:41 tsutsui Exp $ */ 2 3 /* 4 * Copyright (c) 1990, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * the Systems Programming Group of the University of Utah Computer 9 * Science Department. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * from: Utah $Hdr: hilreg.h 1.10 92/01/21$ 36 * 37 * @(#)hilreg.h 8.1 (Berkeley) 6/10/93 38 */ 39 /* 40 * Copyright (c) 1988 University of Utah. 41 * 42 * This code is derived from software contributed to Berkeley by 43 * the Systems Programming Group of the University of Utah Computer 44 * Science Department. 45 * 46 * Redistribution and use in source and binary forms, with or without 47 * modification, are permitted provided that the following conditions 48 * are met: 49 * 1. Redistributions of source code must retain the above copyright 50 * notice, this list of conditions and the following disclaimer. 51 * 2. Redistributions in binary form must reproduce the above copyright 52 * notice, this list of conditions and the following disclaimer in the 53 * documentation and/or other materials provided with the distribution. 54 * 3. All advertising materials mentioning features or use of this software 55 * must display the following acknowledgement: 56 * This product includes software developed by the University of 57 * California, Berkeley and its contributors. 58 * 4. Neither the name of the University nor the names of its contributors 59 * may be used to endorse or promote products derived from this software 60 * without specific prior written permission. 61 * 62 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 63 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 64 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 65 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 66 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 67 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 68 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 69 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 70 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 71 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 72 * SUCH DAMAGE. 73 * 74 * from: Utah $Hdr: hilreg.h 1.10 92/01/21$ 75 * 76 * @(#)hilreg.h 8.1 (Berkeley) 6/10/93 77 */ 78 79 #include <hp300/dev/iotypes.h> /* XXX */ 80 81 #ifdef hp300 82 struct hil_dev { 83 char hil_pad0; 84 vu_char hil_data; 85 char hil_pad1; 86 vu_char hil_cmd; 87 }; 88 89 #define HILADDR ((struct hil_dev *)IIOV(0x428000)) 90 #define BBCADDR ((struct hil_dev *)IIOV(0x420000)) 91 #endif 92 93 #ifdef hp800 94 #ifdef hp700 95 struct hil_dev { 96 vu_char hil_rsthold; /* (WO) reset hold (and Serial #3) */ 97 vu_char hil_resv1[2047]; 98 vu_char hil_data; /* send/receive data to/from 8042 */ 99 vu_char hil_cmd; /* status/control to/from 8042 */ 100 vu_char hil_resv2[1022]; 101 vu_char hil_rstrel; /* (WO) reset release (and Serial #3) */ 102 103 }; 104 #else 105 struct hil_dev { 106 vu_int hil_data; 107 vu_int hil_pad; 108 vu_int hil_cmd; 109 }; 110 #endif 111 #endif 112 #define hil_stat hil_cmd 113 114 #if defined(hp300) || defined(hp700) 115 #define READHILDATA(x) ((x)->hil_data) 116 #define READHILSTAT(x) ((x)->hil_stat) 117 #define READHILCMD(x) ((x)->hil_cmd) 118 #define WRITEHILDATA(x, y) ((x)->hil_data = (y)) 119 #define WRITEHILSTAT(x, y) ((x)->hil_stat = (y)) 120 #define WRITEHILCMD(x, y) ((x)->hil_cmd = (y)) 121 #else 122 #define READHILDATA(x) ((x)->hil_data >> 24) 123 #define READHILSTAT(x) ((x)->hil_stat >> 24) 124 #define READHILCMD(x) ((x)->hil_cmd >> 24) 125 #define WRITEHILDATA(x, y) ((x)->hil_data = ((y) << 24)) 126 #define WRITEHILSTAT(x, y) ((x)->hil_stat = ((y) << 24)) 127 #define WRITEHILCMD(x, y) ((x)->hil_cmd = ((y) << 24)) 128 #endif 129 130 #define HIL_BUSY 0x02 131 #define HIL_DATA_RDY 0x01 132 133 #define HILWAIT(hil_dev) while ((READHILSTAT(hil_dev) & HIL_BUSY)) 134 #define HILDATAWAIT(hil_dev) while (!(READHILSTAT(hil_dev) & HIL_DATA_RDY)) 135 136 /* HIL status bits */ 137 #define HIL_POLLDATA 0x10 /* HIL poll data follows */ 138 #define HIL_COMMAND 0x08 /* Start of original command */ 139 #define HIL_ERROR 0x080 /* HIL error */ 140 #define HIL_RECONFIG 0x080 /* HIL has reconfigured */ 141 #define HIL_STATMASK (HIL_DATA | HIL_COMMAND) 142 143 #define HIL_SSHIFT 4 /* Bits to shift status over */ 144 #define HIL_SMASK 0xF /* Service request status mask */ 145 #define HIL_DEVMASK 0x07 146 147 /* HIL status types */ 148 #define HIL_STATUS 0x5 /* HIL status in data register */ 149 #define HIL_DATA 0x6 /* HIL data in data register */ 150 #define HIL_CTRLSHIFT 0x8 /* key + CTRL + SHIFT */ 151 #define HIL_CTRL 0x9 /* key + CTRL */ 152 #define HIL_SHIFT 0xA /* key + SHIFT */ 153 #define HIL_KEY 0xB /* key only */ 154 #define HIL_68K 0x4 /* Data from the 68k is ready */ 155 156 /* HIL commands */ 157 #define HIL_SETARD 0xA0 /* set auto-repeat delay */ 158 #define HIL_SETARR 0xA2 /* set auto-repeat rate */ 159 #define HIL_SETTONE 0xA3 /* set tone generator */ 160 #define HIL_CNMT 0xB2 /* clear nmi */ 161 #define HIL_INTON 0x5C /* Turn on interrupts. */ 162 #define HIL_INTOFF 0x5D /* Turn off interrupts. */ 163 #define HIL_TRIGGER 0xC5 /* trigger command */ 164 #define HIL_STARTCMD 0xE0 /* start loop command */ 165 #define HIL_TIMEOUT 0xFE /* timeout */ 166 #define HIL_READTIME 0x13 /* Read real time register */ 167 168 /* Read/write various registers on the 8042. */ 169 #define HIL_READBUSY 0x02 /* internal "busy" register */ 170 #define HIL_READKBDLANG 0x12 /* read keyboard language code */ 171 #define HIL_READKBDSADR 0xF9 172 #define HIL_WRITEKBDSADR 0xE9 173 #define HIL_READLPSTAT 0xFA 174 #define HIL_WRITELPSTAT 0xEA 175 #define HIL_READLPCTRL 0xFB 176 #define HIL_WRITELPCTRL 0xEB 177 178 /* BUSY bits */ 179 #define BSY_LOOPBUSY 0x04 180 181 /* LPCTRL bits */ 182 #define LPC_AUTOPOLL 0x01 /* enable auto-polling */ 183 #define LPC_NOERROR 0x02 /* don't report errors */ 184 #define LPC_NORECONF 0x04 /* don't report reconfigure */ 185 #define LPC_KBDCOOK 0x10 /* cook all keyboards */ 186 #define LPC_RECONF 0x80 /* reconfigure the loop */ 187 188 /* LPSTAT bits */ 189 #define LPS_DEVMASK 0x07 /* number of loop devices */ 190 #define LPS_CONFGOOD 0x08 /* reconfiguration worked */ 191 #define LPS_CONFFAIL 0x80 /* reconfiguration failed */ 192 193 /* HIL packet headers */ 194 #define HIL_MOUSEDATA 0x2 195 #define HIL_KBDDATA 0x40 196 197 #define HIL_MOUSEMOTION 0x02 /* mouse movement event */ 198 #define HIL_KBDBUTTON 0x40 /* keyboard button event */ 199 #define HIL_MOUSEBUTTON 0x40 /* mouse button event */ 200 #define HIL_BUTTONBOX 0x60 /* button box event */ 201 #define HIL_TABLET 0x02 /* tablet motion event */ 202 #define HIL_KNOBBOX 0x03 /* knob box motion data */ 203 204 /* For setting auto repeat on the keyboard */ 205 #define ar_format(x) ~((x - 10) / 10) 206 #define KBD_ARD 400 /* initial delay in msec (10 - 2560) */ 207 #define KBD_ARR 60 /* rate (10 - 2550 msec, 2551 == off) */ 208 209 #ifdef hp300 210 /* Magic */ 211 #define KBDNMISTAT ((volatile char *)IIOV(0x478005)) 212 #define KBDNMI 0x04 213 #endif 214
Indexes created Thu Oct 02 01:09:59 GMT 2025