xref: /src/sys/arch/hpcarm/dev/ipaq_gpioreg.h

/*	$NetBSD: ipaq_gpioreg.h,v 1.8 2025/09/07 21:31:20 andvar Exp $	*/

/*-
 * Copyright (c) 2001 The NetBSD Foundation, Inc.  All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Ichiro FUKUHARA (ichiro (at) ichiro.org).
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * iPAQ H3600 specific parameter
 */
/*
port	I/O(Active)	name 	desc
0	I(L)	PWR_ON#		button detect: power-on
1	I(L)	IP_IRQ#		cpu-interrupt
2...9	O	LDD{8..15}	LCD DATA(8-15)
10	I(L)	CARD_IND1#	PCMCIA Socket1 inserted detection
11	I(L)	CARD_IRQ1#	PCMCIA slot1 IRQ
12	O	CLK_SET0	clock select 0 for audio codec
13	O	CLK_SET1	clock select 1 for audio codec
14	I/O	L3_SDA		UDA1341 L3DATA
15	O	L3_MODE		UDA1341 L3MODE
16	O	L3_SCLK		UDA1341 L3SCLK
17	I(L)	CARD_IND0#	PCMCIA Socket0 inserted detection
18	I(L)	KEY_ACT#	button detect: center button
19	I	SYS_CLK		Stereo audio codev external clock
20	I(H)	BAT_FAULT	Battery fault
21	I(L)	CARD_IRQ0#	PCMCIA slot0 IRQ
22	I(L)	LOCK#		expansion pack lock/unlock signal
23	I(H)	COM_DCD		RS-232 DCD
24	I(H)	OPT_IRQ		expansion pack shared IRQ
25	I(H)	COM_CTS		RS-232 CTS
26	O(H)	COM_RTS		RS-232 RTS
27	O(L)	OPT_DETECT#	Indicates presence of expansion pack inserted

Extended GPIO
0	O(H)	VPEN		Enables programming and erasing of Flash
1	O(H)	CARD_RESET	CF/PCMCIA card reset signal
2	O(H)	OPT_RESET	Expansion pack reset signal
3	O(L)	CODEC_RESET#	onboard codec reset signal
4	O(H)	OPT_NVRAM_ON	Enables power supply to the NVRAM of the
				Expansion pack.(=OPT_ON)
5	O(H)	OPT_ON		Enables full power supply to the Expansion pack.
6	O(H)	LCD_ON		Enables LCD 3.3V power supply
7	O(H)	RS232_ON	Enables RS232
8	O(H)	LCD_PCI		Enables power to LCD control IC
9	O(H)	IR_ON		Enables power to IR module
10	O(H)	AUD_ON		Enables power to audio output amp.
11	O(H)	AUD_PWR_ON	Enables power to all audio modules.
12	O(H)	QMUTE		Mutes the onboard audio codec
13	O	IR_FSEL		FIR mode selection:H=FIR,L=SIR
14	O(H)	LCD_5V_ON	Enables 5V to the LCD module
15	O(H)	LVDD_ON		Enables 9V and -6.5V to the LCD module
 */

#define GPIO_H3600_POWER_BUTTON	GPIO (0)
#define GPIO_H3600_CLK_SET0	GPIO (12)
#define GPIO_H3600_CLK_SET1	GPIO (13)
#define GPIO_H3600_PCMCIA_CD0	GPIO (17)
#define GPIO_H3600_PCMCIA_CD1	GPIO (10)
#define GPIO_H3600_PCMCIA_IRQ0	GPIO (21)
#define GPIO_H3600_PCMCIA_IRQ1	GPIO (11)
#define GPIO_H3600_L3_DATA	GPIO (14)
#define GPIO_H3600_L3_MODE	GPIO (15)
#define GPIO_H3600_L3_CLK	GPIO (16)
#define GPIO_H3600_OPT_LOCK	GPIO (22)
#define GPIO_H3600_OPT_IRQ	GPIO (24)
#define GPIO_H3600_OPT_DETECT	GPIO (27)

#define EGPIO_H3600_VPEN		GPIO (0)
#define EGPIO_H3600_CARD_RESET		GPIO (1)
#define EGPIO_H3600_OPT_RESET		GPIO (2)
#define EGPIO_H3600_CODEC_RESET		GPIO (3)
#define EGPIO_H3600_OPT_NVRAM_ON	GPIO (4)
#define EGPIO_H3600_OPT_ON		GPIO (5)
#define EGPIO_H3600_LCD33_ON		GPIO (6)
#define EGPIO_H3600_RS232_ON		GPIO (7)
#define EGPIO_H3600_LCD_PCI		GPIO (8)
#define EGPIO_H3600_IR_ON		GPIO (9)
#define EGPIO_H3600_AUD_ON		GPIO (10)
#define EGPIO_H3600_AUD_PWRON		GPIO (11)
#define EGPIO_H3600_QMUTE		GPIO (12)
#define EGPIO_H3600_IR_FSEL		GPIO (13)
#define EGPIO_H3600_LCD5_ON		GPIO (14)
#define EGPIO_H3600_LVDD_ON		GPIO (15)

#define EGPIO_INIT	EGPIO_H3600_RS232_ON| \
			EGPIO_H3600_AUD_PWRON| \
			EGPIO_H3600_QMUTE| \
			EGPIO_H3600_AUD_ON

#define EGPIO_LCD_INIT	EGPIO_H3600_LCD33_ON| \
			EGPIO_H3600_LCD_PCI| \
			EGPIO_H3600_LCD5_ON| \
			EGPIO_H3600_LVDD_ON