tx39power.c revision 1.3
1 /* $NetBSD: tx39power.c,v 1.3 1999/12/12 17:06:22 uch Exp $ */ 2 3 /* 4 * Copyright (c) 1999, by UCHIYAMA Yasushi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. The name of the developer may NOT be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 */ 28 #include "opt_tx39_debug.h" 29 #include "opt_tx39powerdebug.h" 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/device.h> 34 35 #include <machine/bus.h> 36 #include <machine/intr.h> 37 38 #include <hpcmips/tx/tx39var.h> 39 #include <hpcmips/tx/tx39icureg.h> 40 #include <hpcmips/tx/tx39powerreg.h> 41 #include <hpcmips/tx/tx39spireg.h> 42 43 #define ISSET(x, v) ((x) & (v)) 44 #define ISSETPRINT(r, m) __is_set_print(r, TX39_POWERCTRL_##m, #m) 45 46 int tx39power_match __P((struct device*, struct cfdata*, void*)); 47 void tx39power_attach __P((struct device*, struct device*, void*)); 48 49 int tx39power_intr __P((void*)); 50 int tx39power_ok_intr __P((void*)); 51 int tx39power_button_intr __P((void*)); 52 53 struct tx39power_softc { 54 struct device sc_dev; 55 tx_chipset_tag_t sc_tc; 56 }; 57 58 struct cfattach tx39power_ca = { 59 sizeof(struct tx39power_softc), tx39power_match, tx39power_attach 60 }; 61 62 int 63 tx39power_match(parent, cf, aux) 64 struct device *parent; 65 struct cfdata *cf; 66 void *aux; 67 { 68 return 2; /* 1st attach group of txsim */ 69 } 70 71 void 72 tx39power_attach(parent, self, aux) 73 struct device *parent; 74 struct device *self; 75 void *aux; 76 { 77 struct txsim_attach_args *ta = aux; 78 struct tx39power_softc *sc = (void*)self; 79 tx_chipset_tag_t tc; 80 txreg_t reg; 81 82 tc = sc->sc_tc = ta->ta_tc; 83 printf("\n"); 84 #ifdef TX39POWERDEBUG 85 reg = tx_conf_read(tc, TX39_POWERCTRL_REG); 86 ISSETPRINT(reg, ONBUTN); 87 ISSETPRINT(reg, PWRINT); 88 ISSETPRINT(reg, PWROK); 89 #ifdef TX392X 90 ISSETPRINT(reg, PWROKNMI); 91 #endif /* TX392X */ 92 ISSETPRINT(reg, SLOWBUS); 93 #ifdef TX391X 94 ISSETPRINT(reg, DIVMOD); 95 #endif /* TX391X */ 96 ISSETPRINT(reg, ENSTPTIMER); 97 ISSETPRINT(reg, ENFORCESHUTDWN); 98 ISSETPRINT(reg, FORCESHUTDWN); 99 ISSETPRINT(reg, FORCESHUTDWNOCC); 100 ISSETPRINT(reg, SELC2MS); 101 #ifdef TX392X 102 ISSETPRINT(reg, WARMSTART); 103 #endif /* TX392X */ 104 ISSETPRINT(reg, BPDBVCC3); 105 ISSETPRINT(reg, STOPCPU); 106 ISSETPRINT(reg, DBNCONBUTN); 107 ISSETPRINT(reg, COLDSTART); 108 ISSETPRINT(reg, PWRCS); 109 ISSETPRINT(reg, VCCON); 110 #ifdef TX391X 111 printf("VIDRF=%d ", TX39_POWERCTRL_VIDRF(reg)); 112 #endif /* TX391X */ 113 printf("STPTIMERVAL=%d ", TX39_POWERCTRL_STPTIMERVAL(reg)); 114 printf("\n"); 115 #endif /* TX39POWERDEBUG */ 116 #ifdef DISABLE_SPI_AND_DOZE /* XXX test XXX */ 117 /* 118 * Disable SPI module 119 */ 120 reg = tx_conf_read(tc, TX39_SPICTRL_REG); 121 if (ISSET(reg, TX39_SPICTRL_ENSPI)) { 122 reg &= ~TX39_SPICTRL_ENSPI; 123 } 124 printf("SPI module disabled\n"); 125 126 /* 127 * Disable Stop timer (Doze CPU mode) 128 */ 129 reg = tx_conf_read(tc, TX39_POWERCTRL_REG); 130 printf("STPTIMER disabled.\n"); 131 reg &= ~TX39_POWERCTRL_ENSTPTIMER; 132 tx_conf_write(tc, TX39_POWERCTRL_REG, reg); 133 #endif /* DISABLE_SPI_AND_DOZE */ 134 135 /* 136 * enable stop timer 137 */ 138 reg = tx_conf_read(tc, TX39_POWERCTRL_REG); 139 140 reg &= ~(TX39_POWERCTRL_STPTIMERVAL_MASK << 141 TX39_POWERCTRL_STPTIMERVAL_SHIFT); 142 reg = TX39_POWERCTRL_STPTIMERVAL_SET(reg, 1); 143 144 reg |= TX39_POWERCTRL_ENSTPTIMER; 145 tx_conf_write(tc, TX39_POWERCTRL_REG, reg); 146 147 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_POSPWRINT), 148 IST_EDGE, IPL_CLOCK, 149 tx39power_intr, sc); 150 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_NEGPWRINT), 151 IST_EDGE, IPL_CLOCK, 152 tx39power_intr, sc); 153 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_POSPWROKINT), 154 IST_EDGE, IPL_CLOCK, 155 tx39power_ok_intr, sc); 156 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_NEGPWROKINT), 157 IST_EDGE, IPL_CLOCK, 158 tx39power_ok_intr, sc); 159 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_POSONBUTNINT), 160 IST_EDGE, IPL_CLOCK, 161 tx39power_button_intr, sc); 162 tx_intr_establish(tc, MAKEINTR(5, TX39_INTRSTATUS5_NEGONBUTNINT), 163 IST_EDGE, IPL_CLOCK, 164 tx39power_button_intr, sc); 165 166 } 167 168 int 169 tx39power_button_intr(arg) 170 void *arg; 171 { 172 printf("power button\n"); 173 return 0; 174 } 175 176 int 177 tx39power_intr(arg) 178 void *arg; 179 { 180 printf("power\n"); 181 return 0; 182 } 183 184 int 185 tx39power_ok_intr(arg) 186 void *arg; 187 { 188 printf("power ok\n"); 189 return 0; 190 } 191
Indexes created Wed Oct 29 09:09:48 GMT 2025