Home | History | Annotate | Line # | Download | only in tx
txcom.c revision 1.45.4.1
      1  1.45.4.1      yamt /*	$NetBSD: txcom.c,v 1.45.4.1 2012/10/30 17:19:45 yamt Exp $ */
      2       1.1       uch 
      3       1.9       uch /*-
      4      1.24       uch  * Copyright (c) 1999, 2000, 2004 The NetBSD Foundation, Inc.
      5       1.1       uch  * All rights reserved.
      6       1.1       uch  *
      7       1.9       uch  * This code is derived from software contributed to The NetBSD Foundation
      8       1.9       uch  * by UCHIYAMA Yasushi.
      9       1.9       uch  *
     10       1.1       uch  * Redistribution and use in source and binary forms, with or without
     11       1.1       uch  * modification, are permitted provided that the following conditions
     12       1.1       uch  * are met:
     13       1.1       uch  * 1. Redistributions of source code must retain the above copyright
     14       1.1       uch  *    notice, this list of conditions and the following disclaimer.
     15       1.9       uch  * 2. Redistributions in binary form must reproduce the above copyright
     16       1.9       uch  *    notice, this list of conditions and the following disclaimer in the
     17       1.9       uch  *    documentation and/or other materials provided with the distribution.
     18       1.1       uch  *
     19       1.9       uch  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20       1.9       uch  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21       1.9       uch  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22       1.9       uch  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23       1.9       uch  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24       1.9       uch  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25       1.9       uch  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26       1.9       uch  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27       1.9       uch  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28       1.9       uch  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29       1.9       uch  * POSSIBILITY OF SUCH DAMAGE.
     30       1.1       uch  */
     31      1.22     lukem 
     32      1.22     lukem #include <sys/cdefs.h>
     33  1.45.4.1      yamt __KERNEL_RCSID(0, "$NetBSD: txcom.c,v 1.45.4.1 2012/10/30 17:19:45 yamt Exp $");
     34      1.15       uch 
     35      1.15       uch #include "opt_tx39uart_debug.h"
     36       1.1       uch 
     37       1.1       uch #include <sys/param.h>
     38       1.1       uch #include <sys/systm.h>
     39       1.3       uch #include <sys/kernel.h>
     40       1.1       uch #include <sys/device.h>
     41       1.3       uch #include <sys/malloc.h>
     42      1.30      elad #include <sys/kauth.h>
     43       1.1       uch 
     44       1.1       uch #include <sys/proc.h> /* tsleep/wakeup */
     45       1.1       uch 
     46       1.1       uch #include <sys/ioctl.h>
     47       1.1       uch #include <sys/select.h>
     48       1.1       uch #include <sys/file.h>
     49       1.1       uch 
     50       1.1       uch #include <sys/tty.h>
     51       1.1       uch #include <sys/conf.h>
     52       1.1       uch #include <dev/cons.h> /* consdev */
     53       1.1       uch 
     54       1.1       uch #include <machine/bus.h>
     55       1.9       uch #include <machine/config_hook.h>
     56       1.1       uch 
     57       1.1       uch #include <hpcmips/tx/tx39var.h>
     58       1.1       uch #include <hpcmips/tx/tx39icureg.h>
     59       1.1       uch #include <hpcmips/tx/tx39uartvar.h>
     60       1.1       uch #include <hpcmips/tx/tx39uartreg.h>
     61       1.1       uch 
     62       1.5       uch #include <hpcmips/tx/tx39irvar.h>
     63       1.5       uch 
     64       1.1       uch #include <hpcmips/tx/tx39clockreg.h> /* XXX */
     65       1.6       uch 
     66       1.9       uch /*
     67       1.9       uch  * UARTA channel has DTR, DSR, RTS, CTS lines. and they  wired to MFIO/IO port.
     68       1.9       uch  */
     69       1.9       uch #define IS_COM0(s)	((s) == 0)
     70       1.9       uch #define IS_COM1(s)	((s) == 1)
     71       1.9       uch #define ON		((void *)1)
     72       1.9       uch #define OFF		((void *)0)
     73       1.1       uch 
     74      1.15       uch #ifdef	TX39UART_DEBUG
     75      1.15       uch #define DPRINTF_ENABLE
     76      1.15       uch #define DPRINTF_DEBUG	tx39uart_debug
     77       1.1       uch #endif
     78      1.15       uch #include <machine/debug.h>
     79       1.1       uch 
     80       1.3       uch #define TXCOM_HW_CONSOLE	0x40
     81       1.3       uch #define	TXCOM_RING_SIZE		256 /* must be a power of two! */
     82       1.3       uch #define TXCOM_RING_MASK		(TXCOM_RING_SIZE - 1)
     83       1.1       uch 
     84       1.3       uch struct txcom_chip {
     85       1.1       uch 	tx_chipset_tag_t sc_tc;
     86       1.1       uch 	int sc_slot;	/* UARTA or UARTB */
     87       1.1       uch 	int sc_cflag;
     88       1.1       uch 	int sc_speed;
     89       1.3       uch 	int sc_swflags;
     90       1.1       uch 	int sc_hwflags;
     91       1.6       uch 
     92       1.6       uch 	int sc_dcd;
     93       1.9       uch 	int sc_msr_cts;
     94       1.9       uch 	int sc_tx_stopped;
     95       1.3       uch };
     96       1.1       uch 
     97       1.3       uch struct txcom_softc {
     98       1.3       uch 	struct tty		*sc_tty;
     99       1.3       uch 	struct txcom_chip	*sc_chip;
    100       1.3       uch 
    101      1.44   tsutsui 	void		*sc_txsoft_cookie;
    102      1.44   tsutsui 	void		*sc_rxsoft_cookie;
    103       1.8   thorpej 
    104       1.3       uch  	u_int8_t	*sc_tba;	/* transmit buffer address */
    105       1.3       uch  	int		sc_tbc;		/* transmit byte count */
    106       1.3       uch 	int		sc_heldtbc;
    107       1.3       uch 	u_int8_t	*sc_rbuf;	/* receive buffer address */
    108       1.3       uch 	int		sc_rbput;	/* receive byte count */
    109       1.3       uch 	int		sc_rbget;
    110       1.1       uch };
    111       1.1       uch 
    112       1.1       uch extern struct cfdriver txcom_cd;
    113       1.1       uch 
    114  1.45.4.1      yamt int	txcom_match(device_t, cfdata_t, void *);
    115  1.45.4.1      yamt void	txcom_attach(device_t, device_t, void *);
    116  1.45.4.1      yamt int	txcom_print(void *, const char *);
    117       1.9       uch 
    118       1.9       uch int	txcom_txintr(void *);
    119       1.9       uch int	txcom_rxintr(void *);
    120       1.9       uch int	txcom_frameerr_intr(void *);
    121       1.9       uch int	txcom_parityerr_intr(void *);
    122       1.9       uch int	txcom_break_intr(void *);
    123       1.3       uch 
    124       1.9       uch void	txcom_rxsoft(void *);
    125       1.9       uch void	txcom_txsoft(void *);
    126       1.3       uch 
    127       1.9       uch int	txcom_stsoft(void *);
    128       1.9       uch int	txcom_stsoft2(void *);
    129       1.9       uch int	txcom_stsoft3(void *);
    130       1.9       uch int	txcom_stsoft4(void *);
    131       1.9       uch 
    132       1.9       uch 
    133       1.9       uch void	txcom_shutdown(struct txcom_softc *);
    134       1.9       uch void	txcom_break(struct txcom_softc *, int);
    135       1.9       uch void	txcom_modem(struct txcom_softc *, int);
    136       1.9       uch void	txcomstart(struct tty *);
    137       1.9       uch int	txcomparam(struct tty *, struct termios *);
    138       1.9       uch 
    139       1.9       uch void	txcom_reset	(struct txcom_chip *);
    140      1.35   thorpej int	txcom_enable	(struct txcom_chip *, bool);
    141       1.9       uch void	txcom_disable	(struct txcom_chip *);
    142       1.9       uch void	txcom_setmode	(struct txcom_chip *);
    143       1.9       uch void	txcom_setbaudrate(struct txcom_chip *);
    144       1.9       uch int	txcom_cngetc	(dev_t);
    145       1.9       uch void	txcom_cnputc	(dev_t, int);
    146       1.9       uch void	txcom_cnpollc	(dev_t, int);
    147       1.3       uch 
    148       1.9       uch int	txcom_dcd_hook(void *, int, long, void *);
    149       1.9       uch int	txcom_cts_hook(void *, int, long, void *);
    150       1.1       uch 
    151       1.9       uch 
    152      1.27     perry inline int	__txcom_txbufready(struct txcom_chip *, int);
    153       1.9       uch const char *__txcom_slotname(int);
    154       1.9       uch 
    155       1.9       uch #ifdef TX39UARTDEBUG
    156       1.9       uch void	txcom_dump(struct txcom_chip *);
    157       1.9       uch #endif
    158       1.6       uch 
    159       1.3       uch struct consdev txcomcons = {
    160      1.21  nakayama 	NULL, NULL, txcom_cngetc, txcom_cnputc, txcom_cnpollc, NULL, NULL,
    161      1.14       uch 	NULL, NODEV, CN_NORMAL
    162       1.3       uch };
    163       1.3       uch 
    164       1.1       uch /* Serial console */
    165       1.3       uch struct txcom_chip txcom_chip;
    166       1.1       uch 
    167  1.45.4.1      yamt CFATTACH_DECL_NEW(txcom, sizeof(struct txcom_softc),
    168      1.19   thorpej     txcom_match, txcom_attach, NULL, NULL);
    169       1.1       uch 
    170      1.17   gehenna dev_type_open(txcomopen);
    171      1.17   gehenna dev_type_close(txcomclose);
    172      1.17   gehenna dev_type_read(txcomread);
    173      1.17   gehenna dev_type_write(txcomwrite);
    174      1.17   gehenna dev_type_ioctl(txcomioctl);
    175      1.17   gehenna dev_type_stop(txcomstop);
    176      1.17   gehenna dev_type_tty(txcomtty);
    177      1.17   gehenna dev_type_poll(txcompoll);
    178      1.17   gehenna 
    179      1.17   gehenna const struct cdevsw txcom_cdevsw = {
    180      1.17   gehenna 	txcomopen, txcomclose, txcomread, txcomwrite, txcomioctl,
    181      1.20  jdolecek 	txcomstop, txcomtty, txcompoll, nommap, ttykqfilter, D_TTY
    182      1.17   gehenna };
    183      1.17   gehenna 
    184       1.1       uch int
    185  1.45.4.1      yamt txcom_match(device_t parent, cfdata_t cf, void *aux)
    186       1.1       uch {
    187       1.1       uch 	/* if the autoconfiguration got this far, there's a slot here */
    188       1.1       uch 	return 1;
    189       1.1       uch }
    190       1.1       uch 
    191       1.1       uch void
    192  1.45.4.1      yamt txcom_attach(device_t parent, device_t self, void *aux)
    193       1.1       uch {
    194       1.1       uch 	struct tx39uart_attach_args *ua = aux;
    195  1.45.4.1      yamt 	struct txcom_softc *sc = device_private(self);
    196       1.1       uch 	tx_chipset_tag_t tc;
    197       1.1       uch 	struct tty *tp;
    198       1.3       uch 	struct txcom_chip *chip;
    199       1.6       uch 	int slot, console;
    200       1.1       uch 
    201       1.1       uch 	/* Check this slot used as serial console */
    202       1.6       uch 	console = (ua->ua_slot == txcom_chip.sc_slot) &&
    203      1.14       uch 	    (txcom_chip.sc_hwflags & TXCOM_HW_CONSOLE);
    204       1.6       uch 
    205       1.6       uch 	if (console) {
    206       1.3       uch 		sc->sc_chip = &txcom_chip;
    207       1.3       uch 	} else {
    208       1.3       uch 		if (!(sc->sc_chip = malloc(sizeof(struct txcom_chip),
    209      1.14       uch 		    M_DEVBUF, M_WAITOK))) {
    210       1.3       uch 			printf(": can't allocate chip\n");
    211       1.3       uch 			return;
    212       1.3       uch 		}
    213       1.3       uch 		memset(sc->sc_chip, 0, sizeof(struct txcom_chip));
    214       1.1       uch 	}
    215       1.1       uch 
    216       1.3       uch 	chip = sc->sc_chip;
    217       1.3       uch 	tc = chip->sc_tc = ua->ua_tc;
    218       1.3       uch 	slot = chip->sc_slot = ua->ua_slot;
    219       1.3       uch 
    220       1.6       uch #ifdef TX39UARTDEBUG
    221       1.6       uch 	txcom_dump(chip);
    222       1.6       uch #endif
    223       1.6       uch 	if (!console)
    224       1.6       uch 		txcom_reset(chip);
    225       1.6       uch 
    226       1.3       uch 	if (!(sc->sc_rbuf = malloc(TXCOM_RING_SIZE, M_DEVBUF, M_WAITOK))) {
    227       1.3       uch 		printf(": can't allocate buffer.\n");
    228       1.3       uch 		return;
    229       1.3       uch 	}
    230       1.3       uch 	memset(sc->sc_rbuf, 0, TXCOM_RING_SIZE);
    231       1.1       uch 
    232      1.45     rmind 	tp = tty_alloc();
    233       1.1       uch 	tp->t_oproc = txcomstart;
    234       1.1       uch 	tp->t_param = txcomparam;
    235       1.1       uch 	tp->t_hwiflow = NULL;
    236       1.1       uch 	sc->sc_tty = tp;
    237       1.1       uch 	tty_attach(tp);
    238       1.1       uch 
    239       1.3       uch 	if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    240       1.1       uch 		int maj;
    241       1.1       uch 		/* locate the major number */
    242      1.17   gehenna 		maj = cdevsw_lookup_major(&txcom_cdevsw);
    243       1.1       uch 
    244  1.45.4.1      yamt 		cn_tab->cn_dev = makedev(maj, device_unit(self));
    245       1.1       uch 
    246       1.3       uch 		printf(": console");
    247       1.1       uch 	}
    248       1.1       uch 
    249       1.3       uch 	printf("\n");
    250       1.1       uch 
    251       1.1       uch 	/*
    252       1.1       uch 	 * Enable interrupt
    253       1.1       uch 	 */
    254       1.3       uch #define TXCOMINTR(i, s) MAKEINTR(2, TX39_INTRSTATUS2_UART##i##INT(s))
    255       1.3       uch 
    256       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(RX, slot), IST_EDGE, IPL_TTY,
    257      1.14       uch 	    txcom_rxintr, sc);
    258       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(TX, slot), IST_EDGE, IPL_TTY,
    259      1.14       uch 	    txcom_txintr, sc);
    260       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(RXOVERRUN, slot), IST_EDGE, IPL_TTY,
    261      1.14       uch 	    txcom_rxintr, sc);
    262       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(TXOVERRUN, slot), IST_EDGE, IPL_TTY,
    263      1.14       uch 	    txcom_txintr, sc);
    264       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(FRAMEERR, slot), IST_EDGE, IPL_TTY,
    265      1.14       uch 	    txcom_frameerr_intr, sc);
    266       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(PARITYERR, slot), IST_EDGE, IPL_TTY,
    267      1.14       uch 	    txcom_parityerr_intr, sc);
    268       1.3       uch 	tx_intr_establish(tc, TXCOMINTR(BREAK, slot), IST_EDGE, IPL_TTY,
    269      1.14       uch 	    txcom_break_intr, sc);
    270       1.5       uch 
    271      1.44   tsutsui 	sc->sc_txsoft_cookie =
    272      1.44   tsutsui 	    softint_establish(SOFTINT_SERIAL, txcom_txsoft, sc);
    273      1.44   tsutsui 	sc->sc_rxsoft_cookie =
    274      1.44   tsutsui 	    softint_establish(SOFTINT_SERIAL, txcom_rxsoft, sc);
    275      1.44   tsutsui 
    276       1.9       uch 	/*
    277       1.9       uch 	 * UARTA has external signal line. (its wiring is platform dependent)
    278       1.9       uch 	 */
    279       1.9       uch 	if (IS_COM0(slot)) {
    280       1.9       uch 		/* install DCD, CTS hooks. */
    281      1.11      sato 		config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_DCD,
    282      1.14       uch 		    CONFIG_HOOK_EXCLUSIVE, txcom_dcd_hook, sc);
    283      1.11      sato 		config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_CTS,
    284      1.14       uch 		    CONFIG_HOOK_EXCLUSIVE, txcom_cts_hook, sc);
    285       1.9       uch 	}
    286       1.6       uch 
    287       1.5       uch 	/*
    288       1.5       uch 	 * UARTB can connect IR module
    289       1.5       uch 	 */
    290       1.9       uch 	if (IS_COM1(slot)) {
    291       1.5       uch 		struct txcom_attach_args tca;
    292       1.5       uch 		tca.tca_tc = tc;
    293       1.5       uch 		tca.tca_parent = self;
    294       1.5       uch 		config_found(self, &tca, txcom_print);
    295       1.5       uch 	}
    296       1.5       uch }
    297       1.5       uch 
    298       1.5       uch int
    299       1.9       uch txcom_print(void *aux, const char *pnp)
    300       1.5       uch {
    301       1.5       uch 	return pnp ? QUIET : UNCONF;
    302       1.1       uch }
    303       1.1       uch 
    304       1.6       uch void
    305       1.9       uch txcom_reset(struct txcom_chip *chip)
    306       1.6       uch {
    307       1.6       uch 	tx_chipset_tag_t tc;
    308       1.6       uch 	int slot, ofs;
    309       1.6       uch 	txreg_t reg;
    310       1.6       uch 
    311       1.6       uch 	tc = chip->sc_tc;
    312       1.6       uch 	slot = chip->sc_slot;
    313       1.6       uch 	ofs = TX39_UARTCTRL1_REG(slot);
    314       1.6       uch 
    315       1.6       uch 	/* Supply clock */
    316       1.6       uch 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    317       1.6       uch 	reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    318       1.6       uch 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    319       1.6       uch 
    320       1.6       uch 	/* reset UART module */
    321       1.6       uch 	tx_conf_write(tc, ofs, 0);
    322       1.6       uch }
    323       1.6       uch 
    324       1.1       uch int
    325      1.35   thorpej txcom_enable(struct txcom_chip *chip, bool console)
    326       1.1       uch {
    327       1.1       uch 	tx_chipset_tag_t tc;
    328       1.1       uch 	txreg_t reg;
    329       1.3       uch 	int slot, ofs, timeout;
    330       1.1       uch 
    331       1.3       uch 	tc = chip->sc_tc;
    332       1.3       uch 	slot = chip->sc_slot;
    333       1.3       uch 	ofs = TX39_UARTCTRL1_REG(slot);
    334       1.1       uch 
    335      1.24       uch 	/*
    336      1.24       uch 	 * External power supply (if any)
    337      1.24       uch 	 * When serial console, Windows CE already powered on it.
    338      1.24       uch 	 */
    339      1.24       uch 	if (!console) {
    340      1.24       uch 		config_hook_call(CONFIG_HOOK_POWERCONTROL,
    341      1.24       uch 		    CONFIG_HOOK_POWERCONTROL_COM0, PWCTL_ON);
    342      1.24       uch 		delay(3);
    343      1.24       uch 	}
    344       1.9       uch 
    345       1.6       uch 	/* Supply clock */
    346       1.5       uch 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    347       1.5       uch 	reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    348       1.5       uch 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    349       1.5       uch 
    350       1.6       uch 	/*
    351       1.6       uch 	 * XXX Disable DMA (DMA not coded yet)
    352       1.6       uch 	 */
    353       1.6       uch 	reg = tx_conf_read(tc, ofs);
    354       1.6       uch 	reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX);
    355       1.6       uch 	tx_conf_write(tc, ofs, reg);
    356       1.6       uch 
    357       1.6       uch 	/* enable */
    358       1.3       uch 	reg = tx_conf_read(tc, ofs);
    359       1.1       uch 	reg |= TX39_UARTCTRL1_ENUART;
    360       1.1       uch 	reg &= ~TX39_UARTCTRL1_ENBREAHALT;
    361       1.3       uch 	tx_conf_write(tc, ofs, reg);
    362       1.3       uch 
    363       1.9       uch 	timeout = 100000;
    364       1.3       uch 
    365       1.3       uch 	while(!(tx_conf_read(tc, ofs) & TX39_UARTCTRL1_UARTON) &&
    366      1.14       uch 	    --timeout > 0)
    367       1.3       uch 		;
    368       1.3       uch 
    369       1.5       uch 	if (timeout == 0 && !cold) {
    370       1.6       uch 		printf("%s never power up\n", __txcom_slotname(slot));
    371       1.3       uch 		return 1;
    372       1.3       uch 	}
    373       1.3       uch 
    374       1.1       uch 	return 0;
    375       1.1       uch }
    376       1.1       uch 
    377       1.1       uch void
    378       1.9       uch txcom_disable(struct txcom_chip *chip)
    379       1.1       uch {
    380       1.1       uch 	tx_chipset_tag_t tc;
    381       1.1       uch 	txreg_t reg;
    382       1.1       uch 	int slot;
    383       1.1       uch 
    384       1.3       uch 	tc = chip->sc_tc;
    385       1.3       uch 	slot = chip->sc_slot;
    386       1.1       uch 
    387       1.1       uch 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
    388       1.1       uch 	/* DMA */
    389       1.1       uch 	reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX);
    390       1.3       uch 
    391       1.6       uch 	/* disable module */
    392       1.1       uch 	reg &= ~TX39_UARTCTRL1_ENUART;
    393       1.1       uch 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    394       1.3       uch 
    395       1.1       uch 	/* Clock */
    396       1.1       uch 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    397       1.1       uch 	reg &= ~(slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    398       1.1       uch 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    399       1.1       uch 
    400       1.1       uch }
    401       1.1       uch 
    402      1.27     perry inline int
    403       1.9       uch __txcom_txbufready(struct txcom_chip *chip, int retry)
    404       1.3       uch {
    405       1.3       uch 	tx_chipset_tag_t tc = chip->sc_tc;
    406       1.3       uch 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    407       1.3       uch 
    408       1.3       uch 	do {
    409       1.3       uch 		if (tx_conf_read(tc, ofs) & TX39_UARTCTRL1_EMPTY)
    410       1.3       uch 			return 1;
    411       1.3       uch 	} while(--retry != 0);
    412       1.3       uch 
    413       1.1       uch 	return 0;
    414       1.1       uch }
    415       1.1       uch 
    416       1.5       uch void
    417  1.45.4.1      yamt txcom_pulse_mode(device_t dev)
    418       1.5       uch {
    419  1.45.4.1      yamt 	struct txcom_softc *sc = device_private(dev);
    420       1.5       uch 	struct txcom_chip *chip = sc->sc_chip;
    421       1.5       uch 	tx_chipset_tag_t tc = chip->sc_tc;
    422       1.5       uch 	int ofs;
    423       1.5       uch 	txreg_t reg;
    424       1.5       uch 
    425       1.5       uch 	ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    426       1.5       uch 
    427       1.5       uch 	reg = tx_conf_read(tc, ofs);
    428       1.6       uch 	/* WindowsCE use this setting */
    429       1.6       uch 	reg |= TX39_UARTCTRL1_PULSEOPT1;
    430       1.6       uch 	reg &= ~TX39_UARTCTRL1_PULSEOPT2;
    431       1.6       uch 	reg |= TX39_UARTCTRL1_DTINVERT;
    432       1.6       uch 
    433       1.5       uch 	tx_conf_write(tc, ofs, reg);
    434       1.5       uch }
    435       1.5       uch 
    436       1.3       uch /*
    437       1.3       uch  * console
    438       1.3       uch  */
    439       1.1       uch int
    440       1.9       uch txcom_cngetc(dev_t dev)
    441       1.1       uch {
    442       1.1       uch 	tx_chipset_tag_t tc;
    443       1.2       uch 	int ofs, c, s;
    444       1.2       uch 
    445       1.3       uch 	s = spltty();
    446       1.2       uch 
    447       1.3       uch 	tc = txcom_chip.sc_tc;
    448       1.3       uch 	ofs = TX39_UARTCTRL1_REG(txcom_chip.sc_slot);
    449       1.1       uch 
    450       1.1       uch 	while(!(TX39_UARTCTRL1_RXHOLDFULL & tx_conf_read(tc, ofs)))
    451       1.1       uch 		;
    452       1.2       uch 
    453       1.3       uch 	c = TX39_UARTRXHOLD_RXDATA(
    454       1.3       uch 		tx_conf_read(tc, TX39_UARTRXHOLD_REG(txcom_chip.sc_slot)));
    455       1.2       uch 
    456       1.3       uch 	if (c == '\r')
    457       1.1       uch 		c = '\n';
    458       1.1       uch 
    459       1.2       uch 	splx(s);
    460       1.2       uch 
    461       1.1       uch 	return c;
    462       1.1       uch }
    463       1.1       uch 
    464       1.1       uch void
    465       1.9       uch txcom_cnputc(dev_t dev, int c)
    466       1.1       uch {
    467       1.3       uch 	struct txcom_chip *chip = &txcom_chip;
    468       1.3       uch 	tx_chipset_tag_t tc = chip->sc_tc;
    469       1.3       uch 	int s;
    470       1.2       uch 
    471       1.3       uch 	s = spltty();
    472       1.1       uch 
    473       1.3       uch 	/* Wait for transmitter to empty */
    474       1.3       uch 	__txcom_txbufready(chip, -1);
    475       1.1       uch 
    476       1.3       uch 	tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    477      1.14       uch 	    (c & TX39_UARTTXHOLD_TXDATA_MASK));
    478       1.1       uch 
    479       1.3       uch 	__txcom_txbufready(chip, -1);
    480       1.3       uch 
    481       1.2       uch 	splx(s);
    482       1.1       uch }
    483       1.1       uch 
    484       1.1       uch void
    485       1.9       uch txcom_cnpollc(dev_t dev, int on)
    486       1.1       uch {
    487       1.1       uch }
    488       1.1       uch 
    489       1.1       uch void
    490       1.9       uch txcom_setmode(struct txcom_chip *chip)
    491       1.1       uch {
    492       1.3       uch 	tcflag_t cflag = chip->sc_cflag;
    493       1.3       uch 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    494       1.1       uch 	txreg_t reg;
    495       1.1       uch 
    496       1.3       uch 	reg = tx_conf_read(chip->sc_tc, ofs);
    497       1.6       uch 	reg &= ~TX39_UARTCTRL1_ENUART;
    498       1.6       uch 	tx_conf_write(chip->sc_tc, ofs, reg);
    499       1.6       uch 
    500       1.1       uch 	switch (ISSET(cflag, CSIZE)) {
    501       1.1       uch 	default:
    502       1.1       uch 		printf("txcom_setmode: CS7, CS8 only. use CS7");
    503       1.1       uch 		/* FALL THROUGH */
    504       1.1       uch 	case CS7:
    505       1.1       uch 		reg |= TX39_UARTCTRL1_BIT7;
    506       1.1       uch 		break;
    507       1.1       uch 	case CS8:
    508       1.1       uch 		reg &= ~TX39_UARTCTRL1_BIT7;
    509       1.1       uch 		break;
    510       1.1       uch 	}
    511       1.3       uch 
    512       1.1       uch 	if (ISSET(cflag, PARENB)) {
    513       1.1       uch 		reg |= TX39_UARTCTRL1_ENPARITY;
    514       1.1       uch 		if (ISSET(cflag, PARODD)) {
    515       1.1       uch 			reg &= ~TX39_UARTCTRL1_EVENPARITY;
    516       1.1       uch 		} else {
    517       1.1       uch 			reg |= TX39_UARTCTRL1_EVENPARITY;
    518       1.1       uch 		}
    519       1.1       uch 	} else {
    520       1.1       uch 		reg &= ~TX39_UARTCTRL1_ENPARITY;
    521       1.1       uch 	}
    522       1.3       uch 
    523       1.6       uch 	if (ISSET(cflag, CSTOPB))
    524       1.1       uch 		reg |= TX39_UARTCTRL1_TWOSTOP;
    525       1.6       uch 	else
    526       1.6       uch 		reg &= ~TX39_UARTCTRL1_TWOSTOP;
    527       1.6       uch 
    528       1.6       uch 	reg |= TX39_UARTCTRL1_ENUART;
    529       1.3       uch 	tx_conf_write(chip->sc_tc, ofs, reg);
    530       1.3       uch }
    531       1.3       uch 
    532       1.3       uch void
    533       1.9       uch txcom_setbaudrate(struct txcom_chip *chip)
    534       1.3       uch {
    535       1.3       uch 	int baudrate;
    536       1.6       uch 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    537       1.6       uch 	txreg_t reg, reg1;
    538       1.3       uch 
    539       1.3       uch 	if (chip->sc_speed == 0)
    540       1.3       uch 		return;
    541       1.3       uch 
    542       1.5       uch 	if (!cold)
    543      1.15       uch 		DPRINTF("%d\n", chip->sc_speed);
    544       1.5       uch 
    545       1.6       uch 	reg1 = tx_conf_read(chip->sc_tc, ofs);
    546       1.6       uch 	reg1 &= ~TX39_UARTCTRL1_ENUART;
    547       1.6       uch 	tx_conf_write(chip->sc_tc, ofs, reg1);
    548       1.6       uch 
    549       1.3       uch 	baudrate = TX39_UARTCLOCKHZ / (chip->sc_speed * 16) - 1;
    550       1.3       uch 	reg = TX39_UARTCTRL2_BAUDRATE_SET(0, baudrate);
    551       1.3       uch 
    552       1.3       uch 	tx_conf_write(chip->sc_tc, TX39_UARTCTRL2_REG(chip->sc_slot), reg);
    553       1.6       uch 
    554       1.6       uch 	reg1 |= TX39_UARTCTRL1_ENUART;
    555       1.6       uch 	tx_conf_write(chip->sc_tc, ofs, reg1);
    556       1.3       uch }
    557       1.3       uch 
    558       1.3       uch int
    559       1.9       uch txcom_cnattach(int slot, int speed, int cflag)
    560       1.3       uch {
    561       1.3       uch 	cn_tab = &txcomcons;
    562       1.3       uch 
    563       1.3       uch 	txcom_chip.sc_tc	= tx_conf_get_tag();
    564       1.3       uch 	txcom_chip.sc_slot	= slot;
    565       1.3       uch 	txcom_chip.sc_cflag	= cflag;
    566       1.3       uch 	txcom_chip.sc_speed	= speed;
    567       1.3       uch 	txcom_chip.sc_hwflags |= TXCOM_HW_CONSOLE;
    568       1.6       uch #if notyet
    569       1.6       uch 	txcom_reset(&txcom_chip);
    570       1.6       uch #endif
    571       1.6       uch 	txcom_setmode(&txcom_chip);
    572       1.6       uch 	txcom_setbaudrate(&txcom_chip);
    573       1.3       uch 
    574      1.36   thorpej 	if (txcom_enable(&txcom_chip, true) != 0)
    575       1.5       uch 		return 1;
    576       1.5       uch 
    577       1.3       uch 	return 0;
    578       1.3       uch }
    579       1.3       uch 
    580       1.3       uch /*
    581       1.3       uch  * tty
    582       1.3       uch  */
    583       1.3       uch void
    584       1.9       uch txcom_break(struct txcom_softc *sc, int on)
    585       1.3       uch {
    586       1.3       uch 	struct txcom_chip *chip = sc->sc_chip;
    587       1.1       uch 
    588       1.3       uch 	tx_conf_write(chip->sc_tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    589      1.14       uch 	    on ? TX39_UARTTXHOLD_BREAK : 0);
    590       1.1       uch }
    591       1.1       uch 
    592       1.1       uch void
    593       1.9       uch txcom_modem(struct txcom_softc *sc, int on)
    594       1.1       uch {
    595       1.3       uch 	struct txcom_chip *chip = sc->sc_chip;
    596       1.3       uch 	tx_chipset_tag_t tc = chip->sc_tc;
    597       1.3       uch 	int slot = chip->sc_slot;
    598       1.1       uch 	txreg_t reg;
    599       1.1       uch 
    600       1.9       uch 	/* assert DTR */
    601       1.9       uch 	if (IS_COM0(slot)) {
    602      1.11      sato 		config_hook_call(CONFIG_HOOK_SET,
    603      1.14       uch 		    CONFIG_HOOK_COM0_DTR,
    604      1.14       uch 		    (void *)on);
    605       1.9       uch 	}
    606       1.9       uch 
    607       1.3       uch 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
    608       1.6       uch 	reg &= ~TX39_UARTCTRL1_ENUART;
    609       1.6       uch 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    610       1.3       uch 
    611       1.3       uch 	if (on) {
    612       1.3       uch 		reg &= ~TX39_UARTCTRL1_DISTXD;
    613       1.3       uch 	} else {
    614       1.6       uch 		reg |= TX39_UARTCTRL1_DISTXD; /* low UARTTXD */
    615       1.3       uch 	}
    616       1.6       uch 
    617       1.6       uch 	reg |= TX39_UARTCTRL1_ENUART;
    618       1.6       uch 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    619       1.1       uch }
    620       1.1       uch 
    621       1.1       uch void
    622       1.9       uch txcom_shutdown(struct txcom_softc *sc)
    623       1.1       uch {
    624       1.1       uch 	struct tty *tp = sc->sc_tty;
    625       1.3       uch 	int s = spltty();
    626       1.1       uch 
    627       1.3       uch 	/* Clear any break condition set with TIOCSBRK. */
    628       1.3       uch 	txcom_break(sc, 0);
    629       1.3       uch 
    630       1.3       uch 	/*
    631       1.3       uch 	 * Hang up if necessary.  Wait a bit, so the other side has time to
    632       1.3       uch 	 * notice even if we immediately open the port again.
    633       1.3       uch 	 */
    634       1.3       uch 	if (ISSET(tp->t_cflag, HUPCL)) {
    635       1.3       uch 		txcom_modem(sc, 0);
    636       1.3       uch 		(void) tsleep(sc, TTIPRI, ttclos, hz);
    637       1.3       uch 	}
    638       1.3       uch 
    639       1.3       uch 
    640       1.3       uch 	/* Turn off interrupts if not the console. */
    641       1.3       uch 	if (!ISSET(sc->sc_chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    642       1.3       uch 		txcom_disable(sc->sc_chip);
    643       1.3       uch 	}
    644       1.1       uch 
    645       1.3       uch 	splx(s);
    646       1.3       uch }
    647       1.1       uch 
    648       1.9       uch const char *
    649       1.9       uch __txcom_slotname(int slot)
    650       1.3       uch {
    651       1.9       uch 	static const char *slotname[] = {"UARTA", "UARTB", "unknown"};
    652       1.9       uch 
    653       1.9       uch 	if (slot != 0 && slot != 1)
    654       1.9       uch 		return slotname[2];
    655       1.9       uch 
    656       1.9       uch 	return slotname[slot];
    657       1.2       uch }
    658       1.2       uch 
    659       1.2       uch int
    660       1.9       uch txcom_frameerr_intr(void *arg)
    661       1.3       uch {
    662       1.3       uch 	struct txcom_softc *sc = arg;
    663       1.3       uch 
    664       1.3       uch 	printf("%s frame error\n", __txcom_slotname(sc->sc_chip->sc_slot));
    665       1.3       uch 
    666       1.3       uch 	return 0;
    667       1.3       uch }
    668       1.3       uch 
    669       1.3       uch int
    670       1.9       uch txcom_parityerr_intr(void *arg)
    671       1.3       uch {
    672       1.3       uch 	struct txcom_softc *sc = arg;
    673       1.3       uch 
    674       1.3       uch 	printf("%s parity error\n", __txcom_slotname(sc->sc_chip->sc_slot));
    675       1.2       uch 
    676       1.2       uch 	return 0;
    677       1.1       uch }
    678       1.1       uch 
    679       1.1       uch int
    680       1.9       uch txcom_break_intr(void *arg)
    681       1.1       uch {
    682       1.1       uch 	struct txcom_softc *sc = arg;
    683       1.3       uch 
    684       1.3       uch 	printf("%s break\n", __txcom_slotname(sc->sc_chip->sc_slot));
    685       1.3       uch 
    686       1.3       uch 	return 0;
    687       1.3       uch }
    688       1.3       uch 
    689       1.3       uch int
    690       1.9       uch txcom_rxintr(void *arg)
    691       1.3       uch {
    692       1.3       uch 	struct txcom_softc *sc = arg;
    693       1.3       uch 	struct txcom_chip *chip = sc->sc_chip;
    694       1.1       uch 	u_int8_t c;
    695       1.1       uch 
    696       1.3       uch 	c = TX39_UARTRXHOLD_RXDATA(
    697       1.3       uch 		tx_conf_read(chip->sc_tc,
    698      1.14       uch 		    TX39_UARTRXHOLD_REG(chip->sc_slot)));
    699       1.3       uch 
    700       1.3       uch 	sc->sc_rbuf[sc->sc_rbput] = c;
    701       1.3       uch 	sc->sc_rbput = (sc->sc_rbput + 1) % TXCOM_RING_MASK;
    702       1.3       uch 
    703      1.44   tsutsui 	softint_schedule(sc->sc_rxsoft_cookie);
    704       1.1       uch 
    705       1.1       uch 	return 0;
    706       1.1       uch }
    707       1.1       uch 
    708       1.3       uch void
    709       1.9       uch txcom_rxsoft(void *arg)
    710       1.3       uch {
    711       1.3       uch 	struct txcom_softc *sc = arg;
    712       1.3       uch 	struct tty *tp = sc->sc_tty;
    713      1.14       uch 	int (*rint)(int, struct tty *);
    714       1.3       uch 	int code;
    715       1.3       uch 	int s, end, get;
    716       1.3       uch 
    717      1.10       eeh 	rint = tp->t_linesw->l_rint;
    718       1.3       uch 
    719       1.3       uch 	s = spltty();
    720       1.3       uch 	end = sc->sc_rbput;
    721       1.3       uch 	get = sc->sc_rbget;
    722       1.3       uch 
    723       1.3       uch 	while (get != end) {
    724       1.3       uch 		code = sc->sc_rbuf[get];
    725       1.3       uch 
    726       1.3       uch 		if ((*rint)(code, tp) == -1) {
    727       1.3       uch 			/*
    728       1.3       uch 			 * The line discipline's buffer is out of space.
    729       1.3       uch 			 */
    730       1.3       uch 		}
    731       1.3       uch 		get = (get + 1) % TXCOM_RING_MASK;
    732       1.3       uch 	}
    733       1.3       uch 	sc->sc_rbget = get;
    734       1.3       uch 
    735       1.3       uch 	splx(s);
    736       1.3       uch }
    737       1.3       uch 
    738       1.1       uch int
    739       1.9       uch txcom_txintr(void *arg)
    740       1.1       uch {
    741       1.1       uch 	struct txcom_softc *sc = arg;
    742       1.3       uch 	struct txcom_chip *chip = sc->sc_chip;
    743       1.3       uch 	tx_chipset_tag_t tc = chip->sc_tc;
    744       1.1       uch 
    745       1.3       uch 	if (sc->sc_tbc > 0) {
    746       1.3       uch 		tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    747      1.14       uch 		    (*sc->sc_tba &
    748      1.14       uch 			TX39_UARTTXHOLD_TXDATA_MASK));
    749       1.3       uch 		sc->sc_tbc--;
    750       1.3       uch 		sc->sc_tba++;
    751       1.3       uch 	} else {
    752      1.44   tsutsui 		softint_schedule(sc->sc_txsoft_cookie);
    753       1.3       uch 	}
    754       1.1       uch 
    755       1.1       uch 	return 0;
    756       1.1       uch }
    757       1.1       uch 
    758       1.3       uch void
    759       1.9       uch txcom_txsoft(void *arg)
    760       1.3       uch {
    761       1.3       uch 	struct txcom_softc *sc = arg;
    762       1.3       uch 	struct tty *tp = sc->sc_tty;
    763       1.3       uch 	int s = spltty();
    764       1.3       uch 
    765       1.3       uch 	CLR(tp->t_state, TS_BUSY);
    766       1.3       uch 	if (ISSET(tp->t_state, TS_FLUSH)) {
    767       1.3       uch 		CLR(tp->t_state, TS_FLUSH);
    768       1.3       uch 	} else {
    769       1.3       uch 		ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf));
    770       1.3       uch 	}
    771       1.3       uch 
    772      1.10       eeh 	(*tp->t_linesw->l_start)(tp);
    773       1.3       uch 
    774       1.3       uch 	splx(s);
    775       1.3       uch }
    776       1.1       uch 
    777       1.1       uch int
    778      1.26  christos txcomopen(dev_t dev, int flag, int mode, struct lwp *l)
    779       1.1       uch {
    780      1.40   tsutsui 	struct txcom_softc *sc;
    781       1.3       uch 	struct txcom_chip *chip;
    782       1.3       uch 	struct tty *tp;
    783      1.23      shin 	int s, err = ENXIO;
    784       1.1       uch 
    785      1.40   tsutsui 	sc = device_lookup_private(&txcom_cd, minor(dev));
    786      1.40   tsutsui 	if (sc == NULL)
    787      1.23      shin 		return err;
    788       1.3       uch 
    789       1.3       uch 	chip = sc->sc_chip;
    790       1.3       uch 	tp = sc->sc_tty;
    791       1.3       uch 
    792      1.32      elad 	if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
    793       1.3       uch 		return (EBUSY);
    794       1.3       uch 
    795       1.3       uch 	s = spltty();
    796       1.3       uch 
    797      1.36   thorpej 	if (txcom_enable(sc->sc_chip, false)) {
    798       1.6       uch 		splx(s);
    799       1.5       uch 		goto out;
    800       1.6       uch 	}
    801       1.5       uch 	/*
    802       1.5       uch 	 * Do the following iff this is a first open.
    803       1.5       uch 	 */
    804       1.5       uch 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    805       1.5       uch 		struct termios t;
    806       1.5       uch 
    807       1.5       uch 		tp->t_dev = dev;
    808       1.1       uch 
    809       1.5       uch 		t.c_ispeed = 0;
    810       1.5       uch 		if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    811       1.5       uch 			t.c_ospeed = chip->sc_speed;
    812       1.5       uch 			t.c_cflag = chip->sc_cflag;
    813       1.5       uch 		} else {
    814       1.5       uch 			t.c_ospeed = TTYDEF_SPEED;
    815       1.5       uch 			t.c_cflag = TTYDEF_CFLAG;
    816       1.5       uch 		}
    817       1.3       uch 
    818       1.5       uch 		if (ISSET(chip->sc_swflags, TIOCFLAG_CLOCAL))
    819       1.5       uch 			SET(t.c_cflag, CLOCAL);
    820       1.5       uch 		if (ISSET(chip->sc_swflags, TIOCFLAG_CRTSCTS))
    821       1.5       uch 			SET(t.c_cflag, CRTSCTS);
    822       1.5       uch 		if (ISSET(chip->sc_swflags, TIOCFLAG_MDMBUF))
    823       1.5       uch 			SET(t.c_cflag, MDMBUF);
    824       1.5       uch 
    825       1.5       uch 		/* Make sure txcomparam() will do something. */
    826       1.5       uch 		tp->t_ospeed = 0;
    827       1.5       uch 		txcomparam(tp, &t);
    828       1.5       uch 
    829       1.5       uch 		tp->t_iflag = TTYDEF_IFLAG;
    830       1.5       uch 		tp->t_oflag = TTYDEF_OFLAG;
    831       1.5       uch 		tp->t_lflag = TTYDEF_LFLAG;
    832       1.1       uch 
    833       1.5       uch 		ttychars(tp);
    834       1.5       uch 		ttsetwater(tp);
    835       1.3       uch 
    836       1.5       uch 		/*
    837       1.5       uch 		 * Turn on DTR.  We must always do this, even if carrier is not
    838       1.5       uch 		 * present, because otherwise we'd have to use TIOCSDTR
    839       1.5       uch 		 * immediately after setting CLOCAL, which applications do not
    840       1.5       uch 		 * expect.  We always assert DTR while the device is open
    841       1.5       uch 		 * unless explicitly requested to deassert it.
    842       1.5       uch 		 */
    843       1.5       uch 		txcom_modem(sc, 1);
    844       1.3       uch 
    845       1.5       uch 		/* Clear the input ring, and unblock. */
    846       1.5       uch 		sc->sc_rbget = sc->sc_rbput = 0;
    847       1.5       uch 	}
    848       1.3       uch 
    849       1.3       uch 	splx(s);
    850       1.6       uch #define	TXCOMDIALOUT(x)	(minor(x) & 0x80000)
    851       1.6       uch 	if ((err = ttyopen(tp, TXCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK)))) {
    852      1.15       uch 		DPRINTF("ttyopen failed\n");
    853       1.3       uch 		goto out;
    854       1.1       uch 	}
    855      1.10       eeh 	if ((err = (*tp->t_linesw->l_open)(dev, tp))) {
    856      1.15       uch 		DPRINTF("line dicipline open failed\n");
    857       1.3       uch 		goto out;
    858       1.3       uch 	}
    859       1.3       uch 
    860       1.3       uch 	return err;
    861       1.3       uch 
    862       1.3       uch  out:
    863       1.3       uch 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    864       1.3       uch 		/*
    865       1.3       uch 		 * We failed to open the device, and nobody else had it opened.
    866       1.3       uch 		 * Clean up the state as appropriate.
    867       1.3       uch 		 */
    868       1.3       uch 		txcom_shutdown(sc);
    869       1.1       uch 	}
    870       1.1       uch 
    871       1.1       uch 	return err;
    872       1.3       uch 
    873       1.1       uch }
    874       1.1       uch 
    875       1.1       uch int
    876      1.26  christos txcomclose(dev_t dev, int flag, int mode, struct lwp *l)
    877       1.1       uch {
    878      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    879       1.1       uch 	struct tty *tp = sc->sc_tty;
    880       1.1       uch 
    881       1.3       uch 	/* XXX This is for cons.c. */
    882       1.3       uch 	if (!ISSET(tp->t_state, TS_ISOPEN))
    883       1.3       uch 		return 0;
    884       1.3       uch 
    885      1.10       eeh 	(*tp->t_linesw->l_close)(tp, flag);
    886       1.1       uch 	ttyclose(tp);
    887       1.1       uch 
    888       1.3       uch 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    889       1.3       uch 		/*
    890       1.3       uch 		 * Although we got a last close, the device may still be in
    891       1.3       uch 		 * use; e.g. if this was the dialout node, and there are still
    892       1.3       uch 		 * processes waiting for carrier on the non-dialout node.
    893       1.3       uch 		 */
    894       1.3       uch 		txcom_shutdown(sc);
    895       1.3       uch 	}
    896       1.3       uch 
    897       1.1       uch 	return 0;
    898       1.1       uch }
    899       1.1       uch 
    900       1.1       uch int
    901       1.9       uch txcomread(dev_t dev, struct uio *uio, int flag)
    902       1.1       uch {
    903      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    904       1.1       uch 	struct tty *tp = sc->sc_tty;
    905       1.3       uch 
    906      1.10       eeh 	return ((*tp->t_linesw->l_read)(tp, uio, flag));
    907       1.1       uch }
    908       1.1       uch 
    909       1.1       uch int
    910       1.9       uch txcomwrite(dev_t dev, struct uio *uio, int flag)
    911       1.1       uch {
    912      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    913       1.1       uch 	struct tty *tp = sc->sc_tty;
    914       1.1       uch 
    915      1.10       eeh 	return ((*tp->t_linesw->l_write)(tp, uio, flag));
    916      1.12       scw }
    917      1.12       scw 
    918      1.12       scw int
    919      1.26  christos txcompoll(dev_t dev, int events, struct lwp *l)
    920      1.12       scw {
    921      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    922      1.12       scw 	struct tty *tp = sc->sc_tty;
    923      1.12       scw 
    924      1.26  christos 	return ((*tp->t_linesw->l_poll)(tp, events, l));
    925       1.1       uch }
    926       1.1       uch 
    927       1.1       uch struct tty *
    928       1.9       uch txcomtty(dev_t dev)
    929       1.1       uch {
    930      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    931       1.3       uch 
    932       1.3       uch 	return sc->sc_tty;
    933       1.1       uch }
    934       1.1       uch 
    935       1.1       uch int
    936      1.37  christos txcomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
    937       1.1       uch {
    938      1.40   tsutsui 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    939       1.1       uch 	struct tty *tp = sc->sc_tty;
    940       1.3       uch 	int s, err;
    941       1.3       uch 
    942      1.26  christos 	err = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
    943      1.16    atatat 	if (err != EPASSTHROUGH) {
    944       1.3       uch 		return err;
    945       1.3       uch 	}
    946       1.3       uch 
    947      1.26  christos 	err = ttioctl(tp, cmd, data, flag, l);
    948      1.16    atatat 	if (err != EPASSTHROUGH) {
    949       1.3       uch 		return err;
    950       1.3       uch 	}
    951       1.3       uch 
    952       1.3       uch 	err = 0;
    953       1.3       uch 
    954       1.3       uch 	s = spltty();
    955       1.3       uch 
    956       1.3       uch 	switch (cmd) {
    957       1.5       uch 	default:
    958      1.16    atatat 		err = EPASSTHROUGH;
    959       1.5       uch 		break;
    960       1.5       uch 
    961       1.3       uch 	case TIOCSBRK:
    962       1.3       uch 		txcom_break(sc, 1);
    963       1.3       uch 		break;
    964       1.3       uch 
    965       1.3       uch 	case TIOCCBRK:
    966       1.3       uch 		txcom_break(sc, 0);
    967       1.3       uch 		break;
    968       1.3       uch 
    969       1.3       uch 	case TIOCSDTR:
    970       1.3       uch 		txcom_modem(sc, 1);
    971       1.3       uch 		break;
    972       1.3       uch 
    973       1.3       uch 	case TIOCCDTR:
    974       1.3       uch 		txcom_modem(sc, 0);
    975       1.3       uch 		break;
    976       1.3       uch 
    977       1.3       uch 	case TIOCGFLAGS:
    978       1.3       uch 		*(int *)data = sc->sc_chip->sc_swflags;
    979       1.3       uch 		break;
    980       1.3       uch 
    981       1.3       uch 	case TIOCSFLAGS:
    982      1.34      elad 		err = kauth_authorize_device_tty(l->l_cred,
    983      1.34      elad 		    KAUTH_DEVICE_TTY_PRIVSET, tp);
    984       1.3       uch 		if (err) {
    985       1.3       uch 			break;
    986       1.3       uch 		}
    987       1.3       uch 		sc->sc_chip->sc_swflags = *(int *)data;
    988       1.3       uch 		break;
    989       1.3       uch 
    990       1.3       uch 	}
    991       1.1       uch 
    992       1.3       uch 	splx(s);
    993       1.1       uch 
    994       1.3       uch 	return err;
    995       1.1       uch }
    996       1.1       uch 
    997       1.1       uch void
    998       1.9       uch txcomstop(struct tty *tp, int flag)
    999       1.1       uch {
   1000      1.40   tsutsui 	struct txcom_softc *sc;
   1001       1.1       uch 	int s;
   1002       1.1       uch 
   1003      1.40   tsutsui 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1004      1.40   tsutsui 
   1005       1.1       uch 	s = spltty();
   1006       1.1       uch 
   1007       1.1       uch 	if (ISSET(tp->t_state, TS_BUSY)) {
   1008       1.1       uch 		/* Stop transmitting at the next chunk. */
   1009       1.1       uch 		sc->sc_tbc = 0;
   1010       1.1       uch 		sc->sc_heldtbc = 0;
   1011       1.1       uch 		if (!ISSET(tp->t_state, TS_TTSTOP))
   1012       1.1       uch 			SET(tp->t_state, TS_FLUSH);
   1013       1.1       uch 	}
   1014       1.3       uch 
   1015       1.1       uch 	splx(s);
   1016       1.1       uch }
   1017       1.1       uch 
   1018       1.1       uch void
   1019       1.9       uch txcomstart(struct tty *tp)
   1020       1.1       uch {
   1021      1.40   tsutsui 	struct txcom_softc *sc;
   1022      1.40   tsutsui 	struct txcom_chip *chip;
   1023      1.40   tsutsui 	tx_chipset_tag_t tc;
   1024      1.40   tsutsui 	int slot;
   1025       1.1       uch 	int s;
   1026       1.1       uch 
   1027      1.40   tsutsui 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1028      1.40   tsutsui 	chip = sc->sc_chip;
   1029      1.40   tsutsui 	tc = chip->sc_tc;
   1030      1.40   tsutsui 	slot = chip->sc_slot;
   1031      1.40   tsutsui 
   1032       1.1       uch 	s = spltty();
   1033       1.3       uch 
   1034       1.3       uch 	if (!__txcom_txbufready(chip, 0) ||
   1035       1.3       uch 	    ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
   1036       1.3       uch 		goto out;
   1037       1.1       uch 
   1038      1.38        ad 	if (!ttypull(tp))
   1039      1.38        ad 		goto out;
   1040       1.3       uch 
   1041       1.1       uch 	sc->sc_tba = tp->t_outq.c_cf;
   1042       1.1       uch 	sc->sc_tbc = ndqb(&tp->t_outq, 0);
   1043       1.3       uch 	SET(tp->t_state, TS_BUSY);
   1044       1.3       uch 
   1045       1.3       uch 	/* Output the first character of the contiguous buffer. */
   1046       1.3       uch 	tx_conf_write(tc, TX39_UARTTXHOLD_REG(slot),
   1047      1.14       uch 	    (*sc->sc_tba & TX39_UARTTXHOLD_TXDATA_MASK));
   1048       1.3       uch 
   1049       1.3       uch 	sc->sc_tbc--;
   1050       1.3       uch 	sc->sc_tba++;
   1051       1.1       uch 
   1052       1.3       uch  out:
   1053       1.1       uch 	splx(s);
   1054       1.1       uch }
   1055       1.1       uch 
   1056       1.3       uch /*
   1057       1.3       uch  * Set TXcom tty parameters from termios.
   1058       1.3       uch  */
   1059       1.1       uch int
   1060       1.9       uch txcomparam(struct tty *tp, struct termios *t)
   1061       1.1       uch {
   1062      1.40   tsutsui 	struct txcom_softc *sc;
   1063       1.3       uch 	struct txcom_chip *chip;
   1064       1.5       uch 	int ospeed;
   1065       1.3       uch 	int s;
   1066       1.3       uch 
   1067      1.40   tsutsui 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1068      1.40   tsutsui 	if (sc == NULL)
   1069       1.3       uch 		return ENXIO;
   1070       1.3       uch 
   1071       1.3       uch 	ospeed = t->c_ospeed;
   1072       1.3       uch 
   1073       1.3       uch 	/* Check requested parameters. */
   1074       1.3       uch 	if (ospeed < 0) {
   1075       1.3       uch 		return EINVAL;
   1076       1.3       uch 	}
   1077       1.3       uch 	if (t->c_ispeed && t->c_ispeed != ospeed) {
   1078       1.3       uch 		return EINVAL;
   1079       1.3       uch 	}
   1080       1.3       uch 
   1081       1.3       uch 	s = spltty();
   1082       1.3       uch 	chip = sc->sc_chip;
   1083       1.3       uch 	/*
   1084       1.3       uch 	 * For the console, always force CLOCAL and !HUPCL, so that the port
   1085       1.3       uch 	 * is always active.
   1086       1.3       uch 	 */
   1087       1.3       uch 	if (ISSET(chip->sc_swflags, TIOCFLAG_SOFTCAR) ||
   1088       1.3       uch 	    ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
   1089       1.5       uch 		SET(t->c_cflag, CLOCAL);
   1090       1.5       uch 		CLR(t->c_cflag, HUPCL);
   1091       1.3       uch 	}
   1092       1.3       uch 	splx(s);
   1093       1.3       uch 
   1094       1.3       uch 	/*
   1095       1.6       uch 	 * If we're not in a mode that assumes a connection is present, then
   1096       1.6       uch 	 * ignore carrier changes.
   1097       1.6       uch 	 */
   1098       1.6       uch 	if (ISSET(t->c_cflag, CLOCAL | MDMBUF))
   1099       1.6       uch 		chip->sc_dcd = 0;
   1100       1.6       uch 	else
   1101       1.6       uch 		chip->sc_dcd = 1;
   1102       1.6       uch 
   1103       1.6       uch 	/*
   1104       1.3       uch 	 * Only whack the UART when params change.
   1105       1.3       uch 	 * Some callers need to clear tp->t_ospeed
   1106       1.3       uch 	 * to make sure initialization gets done.
   1107       1.3       uch 	 */
   1108       1.5       uch 	if (tp->t_ospeed == ospeed && tp->t_cflag == t->c_cflag) {
   1109       1.3       uch 		return 0;
   1110       1.3       uch 	}
   1111       1.3       uch 
   1112       1.3       uch 	s = spltty();
   1113       1.3       uch 	chip = sc->sc_chip;
   1114       1.3       uch 	chip->sc_speed = ospeed;
   1115       1.5       uch 	chip->sc_cflag = t->c_cflag;
   1116       1.3       uch 
   1117       1.3       uch 	txcom_setmode(chip);
   1118       1.3       uch 	txcom_setbaudrate(chip);
   1119       1.6       uch 
   1120       1.3       uch 	/* And copy to tty. */
   1121       1.3       uch 	tp->t_ispeed = 0;
   1122       1.3       uch 	tp->t_ospeed = chip->sc_speed;
   1123       1.3       uch 	tp->t_cflag = chip->sc_cflag;
   1124       1.3       uch 
   1125       1.3       uch 	/*
   1126       1.6       uch 	 * Update the tty layer's idea of the carrier bit, in case we changed
   1127       1.6       uch 	 * CLOCAL or MDMBUF.  We don't hang up here; we only do that by
   1128       1.6       uch 	 * explicit request.
   1129       1.6       uch 	 */
   1130      1.10       eeh 	(void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd);
   1131       1.6       uch 
   1132       1.6       uch 	/*
   1133       1.3       uch 	 * If hardware flow control is disabled, unblock any hard flow
   1134       1.3       uch 	 * control state.
   1135       1.3       uch 	 */
   1136       1.3       uch 	if (!ISSET(chip->sc_cflag, CHWFLOW)) {
   1137       1.3       uch 		txcomstart(tp);
   1138       1.3       uch 	}
   1139       1.3       uch 
   1140       1.3       uch 	splx(s);
   1141       1.6       uch 
   1142       1.6       uch 	return 0;
   1143       1.6       uch }
   1144       1.6       uch 
   1145       1.9       uch int
   1146       1.9       uch txcom_dcd_hook(void *arg, int type, long id, void *msg)
   1147       1.9       uch {
   1148       1.9       uch 	struct txcom_softc *sc = arg;
   1149       1.9       uch 	struct tty *tp = sc->sc_tty;
   1150       1.9       uch 	struct txcom_chip *chip = sc->sc_chip;
   1151       1.9       uch 	int modem = !(int)msg; /* p-edge 1, n-edge 0 */
   1152       1.9       uch 
   1153      1.15       uch 	DPRINTF("DCD %s\n", modem ? "ON" : "OFF");
   1154       1.9       uch 
   1155       1.9       uch 	if (modem && chip->sc_dcd)
   1156      1.10       eeh 		(void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd);
   1157       1.9       uch 
   1158       1.9       uch 	return 0;
   1159       1.9       uch }
   1160       1.9       uch 
   1161       1.9       uch int
   1162       1.9       uch txcom_cts_hook(void *arg, int type, long id, void *msg)
   1163       1.9       uch {
   1164       1.9       uch 	struct txcom_softc *sc = arg;
   1165       1.9       uch 	struct tty *tp = sc->sc_tty;
   1166       1.9       uch 	struct txcom_chip *chip = sc->sc_chip;
   1167       1.9       uch 	int clear = !(int)msg; /* p-edge 1, n-edge 0 */
   1168       1.9       uch 
   1169      1.15       uch 	DPRINTF("CTS %s\n", clear ? "ON"  : "OFF");
   1170       1.9       uch 
   1171       1.9       uch 	if (chip->sc_msr_cts) {
   1172       1.9       uch 		if (!clear) {
   1173       1.9       uch 			chip->sc_tx_stopped = 1;
   1174       1.9       uch 		} else {
   1175       1.9       uch 			chip->sc_tx_stopped = 0;
   1176      1.10       eeh 			(*tp->t_linesw->l_start)(tp);
   1177       1.9       uch 		}
   1178       1.9       uch 	}
   1179       1.9       uch 
   1180       1.9       uch 	return 0;
   1181       1.9       uch }
   1182       1.9       uch 
   1183       1.9       uch #ifdef TX39UARTDEBUG
   1184       1.6       uch void
   1185       1.9       uch txcom_dump(struct txcom_chip *chip)
   1186       1.6       uch {
   1187       1.6       uch 	tx_chipset_tag_t tc = chip->sc_tc;
   1188       1.6       uch 	int slot = chip->sc_slot;
   1189       1.6       uch 	txreg_t reg;
   1190       1.6       uch 
   1191       1.6       uch 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
   1192       1.6       uch #define ISSETPRINT(r, m) \
   1193      1.15       uch 	dbg_bitmask_print(r, TX39_UARTCTRL1_##m, #m)
   1194       1.6       uch 	ISSETPRINT(reg, UARTON);
   1195       1.6       uch 	ISSETPRINT(reg, EMPTY);
   1196       1.6       uch 	ISSETPRINT(reg, PRXHOLDFULL);
   1197       1.6       uch 	ISSETPRINT(reg, RXHOLDFULL);
   1198       1.6       uch 	ISSETPRINT(reg, ENDMARX);
   1199       1.6       uch 	ISSETPRINT(reg, ENDMATX);
   1200       1.6       uch 	ISSETPRINT(reg, TESTMODE);
   1201       1.6       uch 	ISSETPRINT(reg, ENBREAHALT);
   1202       1.6       uch 	ISSETPRINT(reg, ENDMATEST);
   1203       1.6       uch 	ISSETPRINT(reg, ENDMALOOP);
   1204       1.6       uch 	ISSETPRINT(reg, PULSEOPT2);
   1205       1.6       uch 	ISSETPRINT(reg, PULSEOPT1);
   1206       1.6       uch 	ISSETPRINT(reg, DTINVERT);
   1207       1.6       uch 	ISSETPRINT(reg, DISTXD);
   1208       1.6       uch 	ISSETPRINT(reg, TWOSTOP);
   1209       1.6       uch 	ISSETPRINT(reg, LOOPBACK);
   1210       1.6       uch 	ISSETPRINT(reg, BIT7);
   1211       1.6       uch 	ISSETPRINT(reg, EVENPARITY);
   1212       1.6       uch 	ISSETPRINT(reg, ENPARITY);
   1213       1.6       uch 	ISSETPRINT(reg, ENUART);
   1214       1.6       uch }
   1215       1.9       uch #endif /* TX39UARTDEBUG */
   1216