xref: /src/sys/arch/hpcmips/vr/vrpiu.c

/*	$NetBSD: vrpiu.c,v 1.13 2001/06/14 08:43:41 sato Exp $	*/

/*
 * Copyright (c) 1999 Shin Takemura All rights reserved.
 * Copyright (c) 2000 SATO Kazumi, All rights reserved.
 * Copyright (c) 1999,2000 PocketBSD Project. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

/*
 * A/D polling part written by SATO Kazumi.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/kernel.h>
#include <sys/callout.h>
#include <sys/boot_flag.h>

#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wsmousevar.h>

#include <machine/bus.h>
#include <machine/platid.h>
#include <machine/platid_mask.h>
#include <machine/config_hook.h>

#include <dev/hpc/tpcalibvar.h>

#include <hpcmips/hpcmips/machdep.h>
#include <hpcmips/vr/vripvar.h>
#include <hpcmips/vr/cmureg.h>
#include <hpcmips/vr/vrpiuvar.h>
#include <hpcmips/vr/vrpiureg.h>

/*
 * contant and macro definitions
 */
#define VRPIUDEBUG
#ifdef VRPIUDEBUG
int	vrpiu_debug = 0;
#define	DPRINTF(arg) if (vrpiu_debug) printf arg;
#define	VPRINTF(arg) if (bootverbose || vrpiu_debug) printf arg;
#else
#define	DPRINTF(arg)
#define	VPRINTF(arg) if (bootverbose) printf arg;
#endif

#ifndef VRPIU_AD_POLL_INTERVAL
#define VRPIU_AD_POLL_INTERVAL	60	/* interval is 60 sec */
#endif /* VRPIU_AD_POLL_INTERTVAL */

#define	PIUSIVL_SCANINTVAL_MIN	333			/* 10msec	*/
#define	PIUSIVL_SCANINTVAL_MAX	PIUSIVL_SCANINTVAL_MASK	/* 60msec	*/
#define VRPIU_TP_SCAN_TIMEOUT	(hz/10)		/* timeout is 100msec	*/

#define TP_INTR	(PIUINT_ALLINTR & ~PIUINT_PADADPINTR)
#define AD_INTR	(PIUINT_PADADPINTR)

/*
 * data types
 */
/* struct vrpiu_softc is defined in vrpiuvar.h */

/*
 * function prototypes
 */
static int	vrpiumatch __P((struct device *, struct cfdata *, void *));
static void	vrpiuattach __P((struct device *, struct device *, void *));

static void	vrpiu_write __P((struct vrpiu_softc *, int, unsigned short));
static u_short	vrpiu_read __P((struct vrpiu_softc *, int));

static int	vrpiu_intr __P((void *));
static void	vrpiu_tp_intr __P((struct vrpiu_softc *));
static void	vrpiu_ad_intr __P((struct vrpiu_softc *));
#ifdef DEBUG
static void	vrpiu_dump_cntreg __P((unsigned int cmd));
#endif

static int	vrpiu_tp_enable __P((void *));
static int	vrpiu_tp_ioctl __P((void *, u_long, caddr_t, int, struct proc *));
static void	vrpiu_tp_disable __P((void *));
static void	vrpiu_tp_up __P((struct vrpiu_softc *));
static void	vrpiu_tp_timeout __P((void *));
int		vrpiu_ad_enable __P((void *));
void		vrpiu_ad_disable __P((void *));
static void	vrpiu_start_powerstate __P((void *));
static void	vrpiu_calc_powerstate __P((struct vrpiu_softc *));
static void	vrpiu_power __P((int, void *));
static u_int	scan_interval __P((u_int data));

/* mra is defined in mra.c */
int mra_Y_AX1_BX2_C __P((int *y, int ys, int *x1, int x1s, int *x2, int x2s,
			 int n, int scale, int *a, int *b, int *c));

/*
 * static or global variables
 */
struct cfattach vrpiu_ca = {
	sizeof(struct vrpiu_softc), vrpiumatch, vrpiuattach
};

const struct wsmouse_accessops vrpiu_accessops = {
	vrpiu_tp_enable,
	vrpiu_tp_ioctl,
	vrpiu_tp_disable,
};

int vrpiu_ad_poll_interval = VRPIU_AD_POLL_INTERVAL;

/*
 * function definitions
 */
static inline void
vrpiu_write(sc, port, val)
	struct vrpiu_softc *sc;
	int port;
	unsigned short val;
{
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, port, val);
}

static inline u_short
vrpiu_read(sc, port)
	struct vrpiu_softc *sc;
	int port;
{
	return bus_space_read_2(sc->sc_iot, sc->sc_ioh, port);
}

static int
vrpiumatch(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	return 1;
}

static void
vrpiuattach(parent, self, aux)
	struct device *parent;
	struct device *self;
	void *aux;
{
	struct vrpiu_softc *sc = (struct vrpiu_softc *)self;
	struct vrip_attach_args *va = aux;
	struct wsmousedev_attach_args wsmaa;

	bus_space_tag_t iot = va->va_iot;
	bus_space_handle_t ioh;

	if (bus_space_map(iot, va->va_addr, 1, 0, &ioh)) {
	    printf(": can't map bus space\n");
	    return;
	}

	sc->sc_iot = iot;
	sc->sc_ioh = ioh;
	sc->sc_vrip = va->va_vc;

	sc->sc_interval = scan_interval(WSMOUSE_RES_DEFAULT);

	/*
	 * disable device until vrpiu_enable called
	 */
	sc->sc_tpstat = VRPIU_TP_STAT_DISABLE;

	/* initialize touch panel timeout structure	*/
	callout_init(&sc->sc_tptimeout);

	/* initialize calibration context	*/
	tpcalib_init(&sc->sc_tpcalib);
#if 1
	/*
	 * XXX, calibrate parameters
	 */
	{
	    int i;
	    static const struct {
		platid_mask_t *mask;
		struct wsmouse_calibcoords coords;
	    } calibrations[] = {
		{ &platid_mask_MACH_NEC_MCR_700,
		  { 0, 0, 799, 599,
		    4,
		    { { 115,  80,   0,   0 },
		      { 115, 966,   0, 599 },
		      { 912,  80, 799,   0 },
		      { 912, 966, 799, 599 } } } },

		{ &platid_mask_MACH_NEC_MCR_700A,
		  { 0, 0, 799, 599,
		    4,
		    { { 115,  80,   0,   0 },
		      { 115, 966,   0, 599 },
		      { 912,  80, 799,   0 },
		      { 912, 966, 799, 599 } } } },

		{ &platid_mask_MACH_NEC_MCR_730,
		  { 0, 0, 799, 599,
		    4,
		    { { 115,  80,   0,   0 },
		      { 115, 966,   0, 599 },
		      { 912,  80, 799,   0 },
		      { 912, 966, 799, 599 } } } },

		{ NULL,		/* samples got on my MC-R500 */
		  { 0, 0, 639, 239,
		    5,
		    { { 502, 486, 320, 120 },
		      {  55, 109,   0,   0 },
		      {  54, 913,   0, 239 },
		      { 973, 924, 639, 239 },
		      { 975, 123, 639,   0 } } } },
	    };
	    for (i = 0; ; i++) {
		if (calibrations[i].mask == NULL
		    || platid_match(&platid, calibrations[i].mask))
		    break;
	    }
	    tpcalib_ioctl(&sc->sc_tpcalib, WSMOUSEIO_SCALIBCOORDS,
			  (caddr_t)&calibrations[i].coords, 0, 0);
	}
#endif

	/* install interrupt handler and enable interrupt */
	if (!(sc->sc_handler =
	    vrip_intr_establish(va->va_vc, va->va_intr, IPL_TTY,
				vrpiu_intr, sc))) {
	    printf (": can't map interrupt line.\n");
	    return;
	}

	/* mask level2 interrupt, stop scan sequencer and mask clock to piu */
	vrpiu_tp_disable(sc);

	printf("\n");

	wsmaa.accessops = &vrpiu_accessops;
	wsmaa.accesscookie = sc;

	/*
	 * attach the wsmouse
	 */
	sc->sc_wsmousedev = config_found(self, &wsmaa, wsmousedevprint);

	/*
	 * power management events
	 */
	sc->sc_power_hook = powerhook_establish(vrpiu_power, sc);

	/*
	 * init A/D port polling.
	 */
	sc->sc_battery.n_values = 3;
	sc->sc_battery.value[0] = -1;
	sc->sc_battery.value[1] = -1;
	sc->sc_battery.value[2] = -1;
	sc->sc_battery.nextpoll = hz*vrpiu_ad_poll_interval;
	callout_init(&sc->sc_adpoll);
	callout_reset(&sc->sc_adpoll, hz, vrpiu_start_powerstate, sc);
}

/*
 * calculate interval value
 *  input: WSMOUSE_RES_MIN - WSMOUSE_RES_MAX
 * output: value for PIUSIVL_REG
 */
static u_int
scan_interval(u_int data)
{
	int scale;

	if (data < WSMOUSE_RES_MIN)
	    data = WSMOUSE_RES_MIN;

	if (WSMOUSE_RES_MAX < data)
	    data = WSMOUSE_RES_MAX;

	scale = WSMOUSE_RES_MAX - WSMOUSE_RES_MIN;
	data += WSMOUSE_RES_MIN;

	return PIUSIVL_SCANINTVAL_MIN +
	    (PIUSIVL_SCANINTVAL_MAX - PIUSIVL_SCANINTVAL_MIN) *
	    (scale - data) / scale;
}

int
vrpiu_ad_enable(v)
	void *v;
{
	struct vrpiu_softc *sc = v;
	int s;
	unsigned int cnt;

	DPRINTF(("%s(%d): vrpiu_ad_enable(): interval=0x%03x\n",
		 __FILE__, __LINE__, sc->sc_interval));
	if (sc->sc_adstat != VRPIU_AD_STAT_DISABLE)
	    return EBUSY;

	/* supply clock to PIU */
	__vrcmu_supply(CMUMSKPIU, 1);

	/* set scan interval */
	vrpiu_write(sc, PIUSIVL_REG_W, sc->sc_interval);

	s = spltty();

	/* clear interrupt status */
	vrpiu_write(sc, PIUINT_REG_W, AD_INTR);

	/* Disable -> Standby */
	cnt = PIUCNT_PIUPWR |
		PIUCNT_PIUMODE_COORDINATE |
		PIUCNT_PADATSTART | PIUCNT_PADATSTOP;
	vrpiu_write(sc, PIUCNT_REG_W, cnt);

	/* Level2 interrupt register setting */
	vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, AD_INTR, 1);

	/* save pen status, touch or release */
	cnt = vrpiu_read(sc, PIUCNT_REG_W);

	/*
	 * Enable scan sequencer operation
	 * Standby -> WaitPenTouch
	 */
	cnt |= PIUCNT_PIUSEQEN;
	vrpiu_write(sc, PIUCNT_REG_W, cnt);

	sc->sc_adstat = VRPIU_AD_STAT_ENABLE;

	splx(s);

	return 0;
}

void
vrpiu_ad_disable(v)
	void *v;
{
	struct vrpiu_softc *sc = v;

	DPRINTF(("%s(%d): vrpiu_ad_disable()\n", __FILE__, __LINE__));

	/* Set level2 interrupt register to mask interrupts */
	vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, AD_INTR, 0);

	sc->sc_adstat = VRPIU_AD_STAT_DISABLE;

	if (sc->sc_tpstat == VRPIU_TP_STAT_DISABLE){
	    /* Disable scan sequencer operation and power off */
	    vrpiu_write(sc, PIUCNT_REG_W, 0);

	    /* mask clock to PIU */
	    __vrcmu_supply(CMUMSKPIU, 0);
	}
}

int
vrpiu_tp_enable(v)
	void *v;
{
	struct vrpiu_softc *sc = v;
	int s;
	unsigned int cnt;

	DPRINTF(("%s(%d): vrpiu_tp_enable(): interval=0x%03x\n",
		 __FILE__, __LINE__, sc->sc_interval));
	if (sc->sc_tpstat != VRPIU_TP_STAT_DISABLE)
	    return EBUSY;

	/* supply clock to PIU */
	__vrcmu_supply(CMUMSKPIU, 1);

	/* set scan interval */
	vrpiu_write(sc, PIUSIVL_REG_W, sc->sc_interval);

	s = spltty();

	/* clear interrupt status */
	vrpiu_write(sc, PIUINT_REG_W, TP_INTR);

	/* Disable -> Standby */
	cnt = PIUCNT_PIUPWR |
		PIUCNT_PIUMODE_COORDINATE |
		PIUCNT_PADATSTART | PIUCNT_PADATSTOP;
	vrpiu_write(sc, PIUCNT_REG_W, cnt);

	/* Level2 interrupt register setting */
	vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, TP_INTR, 1);

	/* save pen status, touch or release */
	cnt = vrpiu_read(sc, PIUCNT_REG_W);

	/*
	 * Enable scan sequencer operation
	 * Standby -> WaitPenTouch
	 */
	cnt |= PIUCNT_PIUSEQEN;
	vrpiu_write(sc, PIUCNT_REG_W, cnt);

	/* transit status DISABLE -> TOUCH or RELEASE */
	sc->sc_tpstat = (cnt & PIUCNT_PENSTC) ?
		VRPIU_TP_STAT_TOUCH : VRPIU_TP_STAT_RELEASE;

	splx(s);

	return 0;
}

void
vrpiu_tp_disable(v)
	void *v;
{
	struct vrpiu_softc *sc = v;

	DPRINTF(("%s(%d): vrpiu_tp_disable()\n", __FILE__, __LINE__));

	/* Set level2 interrupt register to mask interrupts */
	vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, TP_INTR, 0);

	sc->sc_tpstat = VRPIU_TP_STAT_DISABLE;

	if (sc->sc_adstat == VRPIU_AD_STAT_DISABLE){
	    /* Disable scan sequencer operation and power off */
	    vrpiu_write(sc, PIUCNT_REG_W, 0);

	    /* mask clock to PIU */
	    __vrcmu_supply(CMUMSKPIU, 0);
	}
}

int
vrpiu_tp_ioctl(v, cmd, data, flag, p)
	void *v;
	u_long cmd;
	caddr_t data;
	int flag;
	struct proc *p;
{
	struct vrpiu_softc *sc = v;

	DPRINTF(("%s(%d): vrpiu_tp_ioctl(%08lx)\n", __FILE__, __LINE__, cmd));

	switch (cmd) {
	case WSMOUSEIO_GTYPE:
	    *(u_int *)data = WSMOUSE_TYPE_TPANEL;
	    break;

	case WSMOUSEIO_SRES:
	    {
		int tp_enable;
		int ad_enable;

		tp_enable = (sc->sc_tpstat != VRPIU_TP_STAT_DISABLE);
		ad_enable = (sc->sc_adstat != VRPIU_AD_STAT_DISABLE);

		if (tp_enable)
		    vrpiu_tp_disable(sc);
		if (ad_enable)
		    vrpiu_ad_disable(sc);

		sc->sc_interval = scan_interval(*(u_int *)data);
		DPRINTF(("%s(%d): WSMOUSEIO_SRES: *data=%d, interval=0x%03x\n",
		    __FILE__, __LINE__, *(u_int *)data, sc->sc_interval));

		if (sc->sc_interval < PIUSIVL_SCANINTVAL_MIN)
		    sc->sc_interval = PIUSIVL_SCANINTVAL_MIN;

		if (PIUSIVL_SCANINTVAL_MAX < sc->sc_interval)
		    sc->sc_interval = PIUSIVL_SCANINTVAL_MAX;

		if (tp_enable)
		    vrpiu_tp_enable(sc);
		if (ad_enable)
		     vrpiu_ad_enable(sc);
	    }
	    break;

	case WSMOUSEIO_SCALIBCOORDS:
	case WSMOUSEIO_GCALIBCOORDS:
            return tpcalib_ioctl(&sc->sc_tpcalib, cmd, data, flag, p);

	default:
	    return (-1);
	}
	return (0);
}

/*
 * PIU AD interrupt handler.
 */
void
vrpiu_ad_intr(sc)
	struct vrpiu_softc *sc;
{
	unsigned int i;
	unsigned int intrstat;

	intrstat = vrpiu_read(sc, PIUINT_REG_W);

	if (sc->sc_adstat == VRPIU_AD_STAT_DISABLE) {
	    /*
	     * the device isn't enabled. just clear interrupt.
	     */
	    vrpiu_write(sc, PIUINT_REG_W, AD_INTR);
	    return;
	}

	if (intrstat & PIUINT_PADADPINTR) {
	    sc->sc_battery.value[0] = (unsigned int)vrpiu_read(sc, PIUAB(0));
	    sc->sc_battery.value[1] = (unsigned int)vrpiu_read(sc, PIUAB(1));
	    sc->sc_battery.value[2] = (unsigned int)vrpiu_read(sc, PIUAB(2));
	}

	if (intrstat & PIUINT_PADADPINTR) {
	    for (i = 0; i < 3; i++) {
		if (sc->sc_battery.value[i] & PIUAB_VALID)
		    sc->sc_battery.value[i] &= PIUAB_PADDATA_MASK;
		else
		    sc->sc_battery.value[i] = 0;
	    }
	    vrpiu_calc_powerstate(sc);
	}
	vrpiu_write(sc, PIUINT_REG_W, AD_INTR);

	return;
}
/*
 * PIU TP interrupt handler.
 */
void
vrpiu_tp_intr(sc)
	struct vrpiu_softc *sc;
{
	unsigned int cnt, i;
	unsigned int intrstat, page;
	int tpx0, tpx1, tpy0, tpy1;
	int x, y, xraw, yraw;

	intrstat = vrpiu_read(sc, PIUINT_REG_W);

	if (sc->sc_tpstat == VRPIU_TP_STAT_DISABLE) {
	    /*
	     * the device isn't enabled. just clear interrupt.
	     */
	    vrpiu_write(sc, PIUINT_REG_W, intrstat & TP_INTR);
	    return;
	}

	page = (intrstat & PIUINT_OVP) ? 1 : 0;
	if (intrstat & (PIUINT_PADPAGE0INTR | PIUINT_PADPAGE1INTR)) {
	    tpx0 = vrpiu_read(sc, PIUPB(page, 0));
	    tpx1 = vrpiu_read(sc, PIUPB(page, 1));
	    tpy0 = vrpiu_read(sc, PIUPB(page, 2));
	    tpy1 = vrpiu_read(sc, PIUPB(page, 3));
	}

	if (intrstat & PIUINT_PADDLOSTINTR) {
	    page = page ? 0 : 1;
	    for (i = 0; i < 4; i++)
		vrpiu_read(sc, PIUPB(page, i));
	}

	cnt = vrpiu_read(sc, PIUCNT_REG_W);
#ifdef DEBUG
	if (vrpiu_debug)
	    vrpiu_dump_cntreg(cnt);
#endif

	/* clear interrupt status */
	vrpiu_write(sc, PIUINT_REG_W, intrstat & TP_INTR);

#if 0
	DPRINTF(("vrpiu_intr: OVP=%d", page));
	if (intrstat & PIUINT_PADCMDINTR)
	    DPRINTF((" CMD"));
	if (intrstat & PIUINT_PADADPINTR)
	    DPRINTF((" A/D"));
	if (intrstat & PIUINT_PADPAGE1INTR)
	    DPRINTF((" PAGE1"));
	if (intrstat & PIUINT_PADPAGE0INTR)
	    DPRINTF((" PAGE0"));
	if (intrstat & PIUINT_PADDLOSTINTR)
	    DPRINTF((" DLOST"));
	if (intrstat & PIUINT_PENCHGINTR)
	    DPRINTF((" PENCHG"));
	DPRINTF(("\n"));
#endif
	if (intrstat & (PIUINT_PADPAGE0INTR | PIUINT_PADPAGE1INTR)) {
	    /*
	     * just ignore scan data if status isn't Touch.
	     */
	    if (sc->sc_tpstat == VRPIU_TP_STAT_TOUCH) {
		/* reset tp scan timeout	*/
		callout_reset(&sc->sc_tptimeout, VRPIU_TP_SCAN_TIMEOUT,
			      vrpiu_tp_timeout, sc);

		if (!((tpx0 & PIUPB_VALID) && (tpx1 & PIUPB_VALID) &&
		    (tpy0 & PIUPB_VALID) && (tpy1 & PIUPB_VALID))) {
		    printf("vrpiu: internal error, data is not valid!\n");
		} else {
		    tpx0 &= PIUPB_PADDATA_MASK;
		    tpx1 &= PIUPB_PADDATA_MASK;
		    tpy0 &= PIUPB_PADDATA_MASK;
		    tpy1 &= PIUPB_PADDATA_MASK;
#define ISVALID(n, c, m)	((c) - (m) < (n) && (n) < (c) + (m))
		    if (ISVALID(tpx0 + tpx1, 1024, 200) &&
			ISVALID(tpy0 + tpy1, 1024, 200)) {
#if 0
			DPRINTF(("%04x %04x %04x %04x\n",
				 tpx0, tpx1, tpy0, tpy1));
			DPRINTF(("%3d %3d (%4d %4d)->", tpx0, tpy0,
				 tpx0 + tpx1, tpy0 + tpy1));
#endif
			xraw = tpy1 * 1024 / (tpy0 + tpy1);
			yraw = tpx1 * 1024 / (tpx0 + tpx1);
			DPRINTF(("%3d %3d", xraw, yraw));

			tpcalib_trans(&sc->sc_tpcalib, xraw, yraw, &x, &y);

			DPRINTF(("->%4d %4d", x, y));
			wsmouse_input(sc->sc_wsmousedev,
				      1, /* button 0 down */
				      x, /* x */
				      y, /* y */
				      0, /* z */
				      WSMOUSE_INPUT_ABSOLUTE_X |
				      WSMOUSE_INPUT_ABSOLUTE_Y);
			DPRINTF(("\n"));
		    }
		}
	    }
	}

	if (cnt & PIUCNT_PENSTC) {
	    if (sc->sc_tpstat == VRPIU_TP_STAT_RELEASE) {
		/*
		 * pen touch
		 */
		DPRINTF(("PEN TOUCH\n"));
		sc->sc_tpstat = VRPIU_TP_STAT_TOUCH;
		/*
		 * We should not report button down event while
		 * we don't know where it occur.
		 */

		/* set tp scan timeout	*/
		callout_reset(&sc->sc_tptimeout, VRPIU_TP_SCAN_TIMEOUT,
			      vrpiu_tp_timeout, sc);
	    }
	} else {
	    vrpiu_tp_up(sc);
	}

	if (intrstat & PIUINT_PADDLOSTINTR) {
	    cnt |= PIUCNT_PIUSEQEN;
	    vrpiu_write(sc, PIUCNT_REG_W, cnt);
	}

	return;
}

void
vrpiu_tp_up(sc)
	struct vrpiu_softc *sc;
{
	if (sc->sc_tpstat == VRPIU_TP_STAT_TOUCH) {
	    /*
	     * pen release
	     */
	    DPRINTF(("RELEASE\n"));
	    sc->sc_tpstat = VRPIU_TP_STAT_RELEASE;

	    /* clear tp scan timeout	*/
	    callout_stop(&sc->sc_tptimeout);

	    /* button 0 UP */
	    wsmouse_input(sc->sc_wsmousedev, 0, 0, 0, 0, 0);
	}
}

/* touch panel timeout handler */
void
vrpiu_tp_timeout(v)
	void *v;
{
	struct vrpiu_softc *sc = (struct vrpiu_softc *)v;

#ifdef VRPIUDEBUG
	{
	    unsigned int cnt = vrpiu_read(sc, PIUCNT_REG_W);
	    DPRINTF(("TIMEOUT: stat=%s  reg=%s\n",
		(sc->sc_tpstat == VRPIU_TP_STAT_TOUCH)?"touch":"release",
		(cnt & PIUCNT_PENSTC)?"touch":"release"));
	}
#endif
	vrpiu_tp_up(sc);
}

/*
 * PIU interrupt handler.
 */
int
vrpiu_intr(arg)
	void *arg;
{
        struct vrpiu_softc *sc = arg;

	vrpiu_ad_intr(sc);
	vrpiu_tp_intr(sc);

	return 0;
}

void
vrpiu_start_powerstate(v)
	void *v;
{
	int mask;
	struct vrpiu_softc *sc = (struct vrpiu_softc *)v;

	vrpiu_ad_enable(sc);
	mask = vrpiu_read(sc, PIUAMSK_REG_W);
	mask &= 0xff8f; /* XXX */
	vrpiu_write(sc, PIUAMSK_REG_W, mask);
	vrpiu_write(sc, PIUASCN_REG_W, PIUACN_ADPSSTART);
	/*
	 * restart next A/D polling
	 */
	callout_reset(&sc->sc_adpoll, hz*vrpiu_ad_poll_interval,
		      vrpiu_start_powerstate, sc);
}

void
vrpiu_calc_powerstate(sc)
	struct vrpiu_softc *sc;
{
	extern void vrgiu_diff_io __P((void));
	vrpiu_ad_disable(sc);
	VPRINTF(("vrpiu:AD: %d, %d, %d\n",
		sc->sc_battery.value[0],
		sc->sc_battery.value[1],
		sc->sc_battery.value[2]));
	sc->sc_battery.nextpoll = hz*vrpiu_ad_poll_interval;
#ifdef notyet
	config_hook_call(CONFIG_HOOK_SET,
			 CONFIG_HOOK_BATTERYVAL,
			 (void *)&sc->sc_battery);
#endif /* notyet */
	/*
	 * restart next A/D polling if change polling timming.
	 */
	if (sc->sc_battery.nextpoll != hz*vrpiu_ad_poll_interval)
	    callout_reset(&sc->sc_adpoll, sc->sc_battery.nextpoll,
			  vrpiu_start_powerstate, sc);
	if (bootverbose)
	    vrgiu_diff_io();

}

static void
vrpiu_power(why, arg)
	int why;
	void *arg;
{
	struct vrpiu_softc *sc = arg;

	switch (why) {
	case PWR_STANDBY:
	case PWR_SUSPEND:
	    break;
	case PWR_RESUME:
	    callout_reset(&sc->sc_adpoll, hz,
			  vrpiu_start_powerstate, sc);
	    break;
	}
}

#ifdef DEBUG
void
vrpiu_dump_cntreg(cnt)
	unsigned int cnt;
{
	printf("%s", (cnt & PIUCNT_PENSTC) ? "Touch" : "Release");
	printf(" state=");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_CmdScan)
	    printf("CmdScan");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_IntervalNextScan)
	    printf("IntervalNextScan");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_PenDataScan)
	    printf("PenDataScan");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_WaitPenTouch)
	    printf("WaitPenTouch");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_RFU)
	    printf("???");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_ADPortScan)
	    printf("ADPortScan");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_Standby)
	    printf("Standby");
	if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_Disable)
	    printf("Disable");
	if (cnt & PIUCNT_PADATSTOP)
	    printf(" AutoStop");
	if (cnt & PIUCNT_PADATSTART)
	    printf(" AutoStart");
	if (cnt & PIUCNT_PADSCANSTOP)
	    printf(" Stop");
	if (cnt & PIUCNT_PADSCANSTART)
	    printf(" Start");
	if (cnt & PIUCNT_PADSCANTYPE)
	    printf(" ScanPressure");
	if ((cnt & PIUCNT_PIUMODE_MASK) == PIUCNT_PIUMODE_ADCONVERTER)
	    printf(" A/D");
	if ((cnt & PIUCNT_PIUMODE_MASK) == PIUCNT_PIUMODE_COORDINATE)
	    printf(" Coordinate");
	if (cnt & PIUCNT_PIUSEQEN)
	    printf(" SeqEn");
	if ((cnt & PIUCNT_PIUPWR) == 0)
	    printf(" PowerOff");
	if ((cnt & PIUCNT_PADRST) == 0)
	    printf(" Reset");
	printf("\n");
}
#endif