j6x0lcd.c revision 1.10
1 /* $NetBSD: j6x0lcd.c,v 1.10 2005/12/18 19:09:26 uwe Exp $ */ 2 3 /* 4 * Copyright (c) 2004, 2005 Valeriy E. Ushakov 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __KERNEL_RCSID(0, "$NetBSD: j6x0lcd.c,v 1.10 2005/12/18 19:09:26 uwe Exp $"); 32 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/device.h> 36 #include <sys/systm.h> 37 #ifdef GPROF 38 #include <sys/gmon.h> 39 #endif 40 41 #include <machine/platid.h> 42 #include <machine/platid_mask.h> 43 44 #include <machine/config_hook.h> 45 46 #include <sh3/dacreg.h> 47 #include <hpcsh/dev/hd64461/hd64461var.h> /* XXX: for hd64461_reg_read_2 &c */ 48 #include <hpcsh/dev/hd64461/hd64461reg.h> 49 #include <hpcsh/dev/hd64461/hd64461gpioreg.h> 50 51 #define arraysize(ary) (sizeof(ary) / sizeof(ary[0])) 52 53 54 /* 55 * LCD power: controlled by pin 0 in HD64461 GPIO port B. 56 * 0 - power on 57 * 1 - power off 58 */ 59 #define HD64461_GPBDR_J6X0_LCD_OFF 0x01 60 61 #define HD64461_GPBCR_J6X0_LCD_OFF_MASK 0xfffc 62 #define HD64461_GPBCR_J6X0_LCD_OFF_BITS 0x0001 63 64 65 /* 66 * LCD brightness: controlled by DAC channel 0. Larger channel values 67 * mean dimmer. Values smaller (i.e. brighter) then 0x5e seems to 68 * result in no visible changes. 69 */ 70 #define J6X0LCD_BRIGHTNESS_DA_MAX 0x5e 71 #define J6X0LCD_BRIGHTNESS_DA_MIN 0xff 72 73 #define J6X0LCD_DA_TO_BRIGHTNESS(da) \ 74 (J6X0LCD_BRIGHTNESS_DA_MIN - (da)) 75 76 #define J6X0LCD_BRIGHTNESS_TO_DA(br) \ 77 (J6X0LCD_BRIGHTNESS_DA_MIN - (br)) 78 79 #define J6X0LCD_BRIGHTNESS_MAX \ 80 J6X0LCD_DA_TO_BRIGHTNESS(J6X0LCD_BRIGHTNESS_DA_MAX) 81 82 /* convenience macro to accesses DAC registers */ 83 #define DAC_(x) (*((volatile uint8_t *)SH7709_DA ## x)) 84 85 86 /* 87 * LCD contrast in 680 is controlled by pins 6..3 of HD64461 GPIO 88 * port B. 6th pin is the least significant bit, 3rd pin is the most 89 * significant. The bits are inverted: 0 = .1111...; 1 = .0111...; 90 * etc. Larger values mean "blacker". 91 * 92 * The contrast value is programmed by setting bits in the data 93 * register to all ones, and changing the mode of the pins in the 94 * control register, setting logical "ones" to GPIO output mode (1), 95 * and switching "zeroes" to input mode (3). 96 */ 97 #define HD64461_GPBDR_J680_CONTRAST_BITS 0x78 /* set */ 98 #define HD64461_GPBCR_J680_CONTRAST_MASK 0xc03f 99 100 static const uint8_t j6x0lcd_contrast680_pins[] = { 6, 5, 4, 3 }; 101 102 static const uint16_t j6x0lcd_contrast680_control_bits[] = { 103 0x1540, 0x3540, 0x1d40, 0x3d40, 0x1740, 0x3740, 0x1f40, 0x3f40, 104 0x15c0, 0x35c0, 0x1dc0, 0x3dc0, 0x17c0, 0x37c0, 0x1fc0, 0x3fc0 105 }; 106 107 108 /* 109 * LCD contrast in 620lx is controlled by pins 7,6,3,4,5 of HD64461 110 * GPIO port B (in the order from the least significant to the most 111 * significant). The bits are inverted: 0 = 11111...; 5 = 01110...; 112 * etc. Larger values mean "whiter". 113 * 114 * The contrast value is programmed by setting bits in the data 115 * register to all zeroes, and changing the mode of the pins in the 116 * control register, setting logical "ones" to GPIO output mode (1), 117 * and switching "zeroes" to input mode (3). 118 */ 119 #define HD64461_GPBDR_J620LX_CONTRAST_BITS 0xf8 /* clear */ 120 #define HD64461_GPBCR_J620LX_CONTRAST_MASK 0x003f 121 122 static const uint8_t j6x0lcd_contrast620lx_pins[] = { 7, 6, 3, 4, 5 }; 123 124 static const uint16_t j6x0lcd_contrast620lx_control_bits[] = { 125 0xffc0, 0x7fc0, 0xdfc0, 0x5fc0, 0xff40, 0x7f40, 0xdf40, 0x5f40, 126 0xfdc0, 0x7dc0, 0xddc0, 0x5dc0, 0xfd40, 0x7d40, 0xdd40, 0x5d40, 127 0xf7c0, 0x77c0, 0xd7c0, 0x57c0, 0xf740, 0x7740, 0xd740, 0x5740, 128 0xf5c0, 0x75c0, 0xd5c0, 0x55c0, 0xf540, 0x7540, 0xd540, 0x5540 129 }; 130 131 132 133 struct j6x0lcd_softc { 134 struct device sc_dev; 135 int sc_brightness; 136 int sc_contrast; 137 138 int sc_contrast_max; 139 uint16_t sc_contrast_mask; 140 const uint16_t *sc_contrast_control_bits; 141 }; 142 143 static int j6x0lcd_match(struct device *, struct cfdata *, void *); 144 static void j6x0lcd_attach(struct device *, struct device *, void *); 145 146 CFATTACH_DECL(j6x0lcd, sizeof(struct j6x0lcd_softc), 147 j6x0lcd_match, j6x0lcd_attach, NULL, NULL); 148 149 150 static int j6x0lcd_param(void *, int, long, void *); 151 static int j6x0lcd_power(void *, int, long, void *); 152 153 static int j6x0lcd_contrast_raw(uint16_t, int, const uint8_t *); 154 static void j6x0lcd_contrast_set(struct j6x0lcd_softc *, int); 155 156 157 158 static int 159 j6x0lcd_match(struct device *parent, struct cfdata *cfp, void *aux) 160 { 161 162 /* 163 * XXX: platid_mask_MACH_HP_LX also matches 360LX. It's not 164 * confirmed whether touch panel in 360LX is connected this 165 * way. We may need to regroup platid masks. 166 */ 167 if (!platid_match(&platid, &platid_mask_MACH_HP_JORNADA_6XX) 168 && !platid_match(&platid, &platid_mask_MACH_HP_LX)) 169 return (0); 170 171 if (strcmp(cfp->cf_name, "j6x0lcd") != 0) 172 return (0); 173 174 return (1); 175 } 176 177 178 static void 179 j6x0lcd_attach(struct device *parent, struct device *self, void *aux) 180 { 181 struct j6x0lcd_softc *sc = (struct j6x0lcd_softc *)self; 182 uint16_t bcr, bdr; 183 uint8_t dcr, ddr; 184 185 /* 186 * Brightness is controlled by DAC channel 0. 187 */ 188 dcr = DAC_(CR); 189 dcr &= ~SH7709_DACR_DAE; /* want to control each channel separately */ 190 dcr |= SH7709_DACR_DAOE0; /* enable channel 0 */ 191 DAC_(CR) = dcr; 192 193 ddr = DAC_(DR0); 194 sc->sc_brightness = J6X0LCD_DA_TO_BRIGHTNESS(ddr); 195 196 /* 197 * Contrast and power are controlled by HD64461 GPIO port B. 198 */ 199 bcr = hd64461_reg_read_2(HD64461_GPBCR_REG16); 200 bdr = hd64461_reg_read_2(HD64461_GPBDR_REG16); 201 202 /* 203 * Make sure LCD is turned on. 204 */ 205 bcr &= HD64461_GPBCR_J6X0_LCD_OFF_MASK; 206 bcr |= HD64461_GPBCR_J6X0_LCD_OFF_BITS; /* output mode */ 207 208 bdr &= ~HD64461_GPBDR_J6X0_LCD_OFF; 209 210 /* 211 * 620LX and 680 have different contrast control. 212 */ 213 if (platid_match(&platid, &platid_mask_MACH_HP_JORNADA_6XX)) { 214 bdr |= HD64461_GPBDR_J680_CONTRAST_BITS; 215 216 sc->sc_contrast_mask = 217 HD64461_GPBCR_J680_CONTRAST_MASK; 218 sc->sc_contrast_control_bits = 219 j6x0lcd_contrast680_control_bits; 220 sc->sc_contrast_max = 221 arraysize(j6x0lcd_contrast680_control_bits) - 1; 222 223 sc->sc_contrast = sc->sc_contrast_max 224 - j6x0lcd_contrast_raw(bcr, 225 arraysize(j6x0lcd_contrast680_pins), 226 j6x0lcd_contrast680_pins); 227 } else { 228 bdr &= ~HD64461_GPBDR_J620LX_CONTRAST_BITS; 229 230 sc->sc_contrast_mask = 231 HD64461_GPBCR_J620LX_CONTRAST_MASK; 232 sc->sc_contrast_control_bits = 233 j6x0lcd_contrast620lx_control_bits; 234 sc->sc_contrast_max = 235 arraysize(j6x0lcd_contrast620lx_control_bits) - 1; 236 237 sc->sc_contrast = 238 j6x0lcd_contrast_raw(bcr, 239 arraysize(j6x0lcd_contrast620lx_pins), 240 j6x0lcd_contrast620lx_pins); 241 } 242 243 hd64461_reg_write_2(HD64461_GPBCR_REG16, bcr); 244 hd64461_reg_write_2(HD64461_GPBDR_REG16, bdr); 245 246 printf(": brightness %d, contrast %d\n", 247 sc->sc_brightness, sc->sc_contrast); 248 249 250 /* LCD brightness hooks */ 251 config_hook(CONFIG_HOOK_GET, CONFIG_HOOK_BRIGHTNESS_MAX, 252 CONFIG_HOOK_SHARE, 253 j6x0lcd_param, sc); 254 config_hook(CONFIG_HOOK_GET, CONFIG_HOOK_BRIGHTNESS, 255 CONFIG_HOOK_SHARE, 256 j6x0lcd_param, sc); 257 config_hook(CONFIG_HOOK_SET, CONFIG_HOOK_BRIGHTNESS, 258 CONFIG_HOOK_SHARE, 259 j6x0lcd_param, sc); 260 261 /* LCD contrast hooks */ 262 config_hook(CONFIG_HOOK_GET, CONFIG_HOOK_CONTRAST_MAX, 263 CONFIG_HOOK_SHARE, 264 j6x0lcd_param, sc); 265 config_hook(CONFIG_HOOK_GET, CONFIG_HOOK_CONTRAST, 266 CONFIG_HOOK_SHARE, 267 j6x0lcd_param, sc); 268 config_hook(CONFIG_HOOK_SET, CONFIG_HOOK_CONTRAST, 269 CONFIG_HOOK_SHARE, 270 j6x0lcd_param, sc); 271 272 /* LCD on/off hook */ 273 config_hook(CONFIG_HOOK_POWERCONTROL, 274 CONFIG_HOOK_POWERCONTROL_LCD, 275 CONFIG_HOOK_SHARE, 276 j6x0lcd_power, sc); 277 } 278 279 280 /* 281 * Get raw contrast value programmed in GPIO port B control register. 282 * Used only at attach time to get initial contrast. 283 */ 284 static int 285 j6x0lcd_contrast_raw(uint16_t bcr, int width, const uint8_t *pin) 286 { 287 int contrast; 288 int bit; 289 290 contrast = 0; 291 for (bit = 0; bit < width; ++bit) { 292 unsigned int c; 293 294 c = (bcr >> (pin[bit] << 1)) & 0x3; 295 if (c == 1) /* pin in output mode? */ 296 contrast |= (1 << bit); 297 } 298 299 return contrast; 300 } 301 302 303 /* 304 * Set contrast by programming GPIO port B control register. 305 * Data register has been initialized at attach time. 306 */ 307 static void 308 j6x0lcd_contrast_set(struct j6x0lcd_softc *sc, int contrast) 309 { 310 uint16_t bcr; 311 312 sc->sc_contrast = contrast; 313 314 bcr = hd64461_reg_read_2(HD64461_GPBCR_REG16); 315 316 bcr &= sc->sc_contrast_mask; 317 bcr |= sc->sc_contrast_control_bits[contrast]; 318 319 hd64461_reg_write_2(HD64461_GPBCR_REG16, bcr); 320 } 321 322 323 static int 324 j6x0lcd_param(void *ctx, int type, long id, void *msg) 325 { 326 struct j6x0lcd_softc *sc = ctx; 327 int value; 328 uint8_t dr; 329 330 switch (type) { 331 case CONFIG_HOOK_GET: 332 switch (id) { 333 case CONFIG_HOOK_CONTRAST: 334 *(int *)msg = sc->sc_contrast; 335 return (0); 336 337 case CONFIG_HOOK_CONTRAST_MAX: 338 *(int *)msg = sc->sc_contrast_max; 339 return (0); 340 341 case CONFIG_HOOK_BRIGHTNESS: 342 *(int *)msg = sc->sc_brightness; 343 return (0); 344 345 case CONFIG_HOOK_BRIGHTNESS_MAX: 346 *(int *)msg = J6X0LCD_BRIGHTNESS_MAX; 347 return (0); 348 } 349 break; 350 351 case CONFIG_HOOK_SET: 352 value = *(int *)msg; 353 if (value < 0) 354 value = 0; 355 356 switch (id) { 357 case CONFIG_HOOK_CONTRAST: 358 if (value > sc->sc_contrast_max) 359 value = sc->sc_contrast_max; 360 j6x0lcd_contrast_set(sc, value); 361 return (0); 362 363 case CONFIG_HOOK_BRIGHTNESS: 364 if (value > J6X0LCD_BRIGHTNESS_MAX) 365 value = J6X0LCD_BRIGHTNESS_MAX; 366 sc->sc_brightness = value; 367 368 dr = J6X0LCD_BRIGHTNESS_TO_DA(value); 369 DAC_(DR0) = dr; 370 return (0); 371 } 372 break; 373 } 374 375 return (EINVAL); 376 } 377 378 379 static int 380 j6x0lcd_power(void *ctx, int type, long id, void *msg) 381 { 382 int on; 383 uint16_t r; 384 385 if (type != CONFIG_HOOK_POWERCONTROL 386 || id != CONFIG_HOOK_POWERCONTROL_LCD) 387 return (EINVAL); 388 389 on = (int)msg; 390 391 r = hd64461_reg_read_2(HD64461_GPBDR_REG16); 392 if (on) 393 r &= ~HD64461_GPBDR_J6X0_LCD_OFF; 394 else 395 r |= HD64461_GPBDR_J6X0_LCD_OFF; 396 hd64461_reg_write_2(HD64461_GPBDR_REG16, r); 397 398 return (0); 399 } 400
Indexes created Tue Sep 30 20:09:53 GMT 2025