NET4501 revision 1.59
11.59Smartti# $NetBSD: NET4501,v 1.59 2008/01/07 08:39:07 martti Exp $
21.1Sthorpej#
31.1Sthorpej# NET4501 -- kernel configuration for a Soekris Engineering net4501
41.1Sthorpej# single-board computer.
51.1Sthorpej#
61.1Sthorpej#	http://www.soekris.com/
71.1Sthorpej# 
81.1Sthorpej
91.1Sthorpejinclude 	"arch/i386/conf/std.i386"
101.1Sthorpej
111.6Satatat#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
121.6Satatat
131.59Smartti#ident 		"NET4501-$Revision: 1.59 $"
141.1Sthorpej
151.1Sthorpejmaxusers	32		# estimated number of users
161.1Sthorpej
171.15Sthorpej# AMD Elan SC520's timer runs at a different frequency
181.15Sthorpejoptions 	TIMER_FREQ=1189200
191.3Sthorpej
201.59Smarttimakeoptions 	CPUFLAGS="-march=i486 -mtune=i486"
211.59Smarttimakeoptions 	COPTS="-Os"
221.1Sthorpej
231.1Sthorpej# CPU-related options.
241.1Sthorpej#options 	MATH_EMULATE	# floating point emulation
251.1Sthorpej#options 	VM86		# virtual 8086 emulation
261.1Sthorpej#options 	USER_LDT	# user-settable LDT; used by WINE
271.1Sthorpej
281.1Sthorpej#options 	MTRR		# memory-type range register syscall support
291.7Sgmcgarry#options 	PERFCTRS	# performance-monitoring counters support
301.1Sthorpej
311.1Sthorpej# delay between "rebooting ..." message and hardware reset, in milliseconds
321.1Sthorpej#options 	CPURESET_DELAY=2000
331.1Sthorpej
341.1Sthorpej# This option allows you to force a serial console at the specified
351.1Sthorpej# I/O address.   see console(4) for details.
361.1Sthorpej#options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
371.1Sthorpej#	you don't want the option below ON iff you are using the
381.1Sthorpej#	serial console option of the new boot strap code.
391.1Sthorpej#options 	CONS_OVERRIDE	# Always use above! independent of boot info
401.1Sthorpej
411.1Sthorpej# The following options override the memory sizes passed in from the boot
421.1Sthorpej# block.  Use them *only* if the boot block is unable to determine the correct
431.1Sthorpej# values.  Note that the BIOS may *correctly* report less than 640k of base
441.1Sthorpej# memory if the extended BIOS data area is located at the top of base memory
451.1Sthorpej# (as is the case on most recent systems).
461.1Sthorpej#options 	REALBASEMEM=639		# size of base memory (in KB)
471.1Sthorpej#options 	REALEXTMEM=15360	# size of extended memory (in KB)
481.1Sthorpej
491.1Sthorpej# Standard system options
501.1Sthorpej
511.1Sthorpejoptions 	INSECURE	# disable kernel security levels
521.1Sthorpej
531.1Sthorpejoptions 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
541.1Sthorpejoptions 	NTP		# NTP phase/frequency locked loop
551.1Sthorpej
561.1Sthorpejoptions 	KTRACE		# system call tracing via ktrace(1)
571.1Sthorpej
581.1Sthorpejoptions 	SYSVMSG		# System V-like message queues
591.1Sthorpejoptions 	SYSVSEM		# System V-like semaphores
601.1Sthorpej#options 	SEMMNI=10	# number of semaphore identifiers
611.1Sthorpej#options 	SEMMNS=60	# number of semaphores in system
621.1Sthorpej#options 	SEMUME=10	# max number of undo entries per process
631.1Sthorpej#options 	SEMMNU=30	# number of undo structures in system
641.1Sthorpejoptions 	SYSVSHM		# System V-like memory sharing
651.9Swiz#options 	SHMMAXPGS=2048	# 2048 pages is the default
661.1Sthorpej
671.1Sthorpejoptions 	LKM		# loadable kernel modules
681.1Sthorpej
691.16Slukemoptions 	USERCONF	# userconf(4) support
701.1Sthorpej#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
711.26Satatat#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
721.1Sthorpej
731.1Sthorpej# Diagnostic/debugging support options
741.1Sthorpej#options 	DIAGNOSTIC	# expensive kernel consistency checks
751.1Sthorpej#options 	DEBUG		# expensive debugging checks/support
761.1Sthorpej#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
771.1Sthorpejoptions 	DDB		# in-kernel debugger
781.18Sjmmv#options 	DDB_ONPANIC=1	# see also sysctl(8): `ddb.onpanic'
791.1Sthorpejoptions 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
801.1Sthorpej#options 	KGDB		# remote debugger
811.1Sthorpej#options 	KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
821.59Smartti#makeoptions 	DEBUG="-g"	# compile full symbol table
831.1Sthorpej
841.1Sthorpej# Compatibility options
851.19Sabsoptions 	COMPAT_NOMID	# NetBSD 0.8, 386BSD, and BSDI
861.19Sabsoptions 	COMPAT_09	# NetBSD 0.9
871.19Sabsoptions 	COMPAT_10	# NetBSD 1.0
881.19Sabsoptions 	COMPAT_11	# NetBSD 1.1
891.19Sabsoptions 	COMPAT_12	# NetBSD 1.2, 386BSD, and BSDI
901.19Sabsoptions 	COMPAT_13	# NetBSD 1.3, 386BSD, and BSDI
911.19Sabsoptions 	COMPAT_14	# NetBSD 1.4
921.19Sabsoptions 	COMPAT_15	# NetBSD 1.5
931.21Sitojunoptions 	COMPAT_16	# NetBSD 1.6
941.33Ssimonboptions 	COMPAT_20	# NetBSD 2.0
951.38Schristosoptions 	COMPAT_30	# NetBSD 3.0 compatibility.
961.55Schristosoptions 	COMPAT_40	# NetBSD 4.0
971.19Sabsoptions 	COMPAT_43	# 4.3BSD, 386BSD, and BSDI
981.1Sthorpejoptions 	COMPAT_386BSD_MBRPART # recognize old partition ID
991.1Sthorpej#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
1001.1Sthorpej
1011.1Sthorpej#options 	COMPAT_SVR4	# binary compatibility with SVR4
1021.1Sthorpej#options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
1031.1Sthorpej#options 	COMPAT_LINUX	# binary compatibility with Linux
1041.1Sthorpej#options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD
1051.1Sthorpej#options 	COMPAT_MACH	# binary compatibility with Mach binaries
1061.1Sthorpej#options 	EXEC_MACHO	# exec MACH-O binaries
1071.1Sthorpej#options 	COMPAT_PECOFF	# kernel support to run Win32 apps
1081.59Smarttioptions 	COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
1091.1Sthorpej
1101.1Sthorpej# File systems
1111.1Sthorpejfile-system 	FFS		# UFS
1121.1Sthorpej#file-system 	EXT2FS		# second extended file system (linux)
1131.1Sthorpej#file-system 	LFS		# log-structured file system
1141.1Sthorpejfile-system 	MFS		# memory file system
1151.1Sthorpejfile-system 	NFS		# Network File System client
1161.1Sthorpej#file-system 	NTFS		# Windows/NT file system (experimental)
1171.1Sthorpej#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
1181.1Sthorpej#file-system 	MSDOSFS		# MS-DOS file system
1191.1Sthorpejfile-system 	FDESC		# /dev/fd
1201.1Sthorpejfile-system 	KERNFS		# /kern
1211.1Sthorpej#file-system 	NULLFS		# loopback file system
1221.1Sthorpej#file-system 	OVERLAY		# overlay file system
1231.1Sthorpej#file-system 	PORTAL		# portal filesystem (still experimental)
1241.1Sthorpejfile-system 	PROCFS		# /proc
1251.1Sthorpej#file-system 	UMAPFS		# NULLFS + uid and gid remapping
1261.1Sthorpej#file-system 	UNION		# union file system
1271.56Smartti#file-system 	CODA		# Coda File System; also needs vcoda (below)
1281.56Smarttifile-system 	PTYFS		# /dev/pts/N support
1291.56Smartti#file-system 	TMPFS		# Efficient memory file-system
1301.1Sthorpej
1311.1Sthorpej# File system options
1321.1Sthorpej#options 	QUOTA		# UFS quotas
1331.1Sthorpej#options 	FFS_EI		# FFS Endian Independent support
1341.1Sthorpejoptions 	SOFTDEP		# FFS soft updates support.
1351.43Stsutsui#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
1361.1Sthorpej#options 	NFSSERVER	# Network File System server
1371.1Sthorpej#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
1381.1Sthorpej				# immutable) behave as system flags.
1391.1Sthorpej
1401.1Sthorpej# Networking options
1411.2Sthorpejoptions 	GATEWAY		# packet forwarding
1421.1Sthorpejoptions 	INET		# IP + ICMP + TCP + UDP
1431.1Sthorpejoptions 	INET6		# IPV6
1441.1Sthorpej#options 	IPSEC		# IP security
1451.1Sthorpej#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
1461.35Stron#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
1471.1Sthorpej#options 	IPSEC_DEBUG	# debug for IP security
1481.1Sthorpejoptions 	MROUTING	# IP multicast routing
1491.27Smanuoptions 	PIM		# Protocol Independent Multicast
1501.1Sthorpej#options 	ISO,TPIP	# OSI
1511.1Sthorpej#options 	EON		# OSI tunneling over IP
1521.1Sthorpej#options 	NETATALK	# AppleTalk networking protocols
1531.1Sthorpej#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
1541.1Sthorpej#options 	PPP_DEFLATE	# Deflate compression support for PPP
1551.1Sthorpej#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
1561.1Sthorpejoptions 	PFIL_HOOKS	# pfil(9) packet filter hooks
1571.1Sthorpej#options 	IPFILTER_LOG	# ipmon(8) log support
1581.50Schristos#options 	IPFILTER_LOOKUP	# ippool(8) support
1591.1Sthorpej#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
1601.1Sthorpej
1611.1Sthorpej# These options enable verbose messages for several subsystems.
1621.1Sthorpej# Warning, these may compile large string tables into the kernel!
1631.1Sthorpej#options 	MIIVERBOSE	# verbose PHY autoconfig messages
1641.1Sthorpej#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
1651.1Sthorpej#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
1661.1Sthorpej
1671.1Sthorpejoptions 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
1681.1Sthorpej
1691.1Sthorpej# Kernel root file system and dump configuration.
1701.1Sthorpejconfig		netbsd	root on ? type ?
1711.1Sthorpej#config		netbsd	root on sd0a type ffs
1721.1Sthorpej#config		netbsd	root on ? type nfs
1731.1Sthorpej
1741.1Sthorpej#
1751.1Sthorpej# Device configuration
1761.1Sthorpej#
1771.1Sthorpej
1781.1Sthorpejmainbus0 at root
1791.17Sfvdlcpu0 	at mainbus0
1801.1Sthorpej
1811.1Sthorpej# Basic Bus Support
1821.1Sthorpej
1831.1Sthorpej# PCI bus support
1841.1Sthorpejpci*	at mainbus? bus ?
1851.1Sthorpej
1861.1Sthorpej# Configure PCI using BIOS information
1871.1Sthorpej#options 	PCIBIOS			# PCI BIOS support
1881.1Sthorpej#options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
1891.34Ssekiya#options 	PCI_ADDR_FIXUP		# fixup PCI I/O addresses
1901.34Ssekiya#options 	PCI_BUS_FIXUP		# fixup PCI bus numbering
1911.34Ssekiya#options 	PCI_INTR_FIXUP		# fixup PCI interrupt routing
1921.1Sthorpej#options 	PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
1931.1Sthorpej#options 	PCIBIOS_INTR_GUESS	# see pcibios(4)
1941.1Sthorpej#options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup
1951.1Sthorpej
1961.1Sthorpej# PCI bridges
1971.14Sthorpejelansc*	at pci? dev ? function ?	# Elan SC520 System Controller
1981.42Srizgpio* 	at elansc?
1991.48Sriz#gpioow* 	at gpio? offset 6 mask 0x1	# 1-wire bus bitbanging via gpio
2001.48Sriz#onewire*	at gpioow?
2011.48Sriz
2021.48Sriz# 1-Wire devices
2031.48Sriz#owtemp* 	at onewire?			# Temperature sensors
2041.1Sthorpej
2051.1Sthorpej# ISA bus support
2061.1Sthorpejisa0	at mainbus?
2071.1Sthorpej
2081.13Sitojun# CardBus bridge support
2091.13Sitojuncbb*		at pci? dev ? function ?
2101.13Sitojuncardslot*	at cbb?
2111.13Sitojun
2121.13Sitojun# CardBus bus support
2131.13Sitojuncardbus*	at cardslot?
2141.13Sitojunpcmcia* 	at cardslot?
2151.22Sdyoung
2161.22Sdyoung# Cardbus NICs
2171.40Sdrochnerath*	at cardbus? function ?	# Atheros 5210/5211/5212 802.11
2181.40Sdrochneratw*	at cardbus? function ?	# ADMtek ADM8211 (802.11)
2191.13Sitojun
2201.1Sthorpej# Coprocessor Support
2211.1Sthorpej
2221.1Sthorpej# Math Coprocessor support
2231.1Sthorpejnpx0	at isa? port 0xf0 irq 13	# x86 math coprocessor
2241.1Sthorpej
2251.1Sthorpej# ISA serial interfaces
2261.1Sthorpejcom0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
2271.1Sthorpejcom1	at isa? port 0x2f8 irq 3
2281.1Sthorpej
2291.1Sthorpej# IDE and related devices
2301.1Sthorpej
2311.24Scube# ATA (IDE) bus support
2321.24Scubeatabus*	at ata?
2331.24Scube
2341.1Sthorpej# ISA ST506, ESDI, and IDE controllers
2351.1Sthorpej# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
2361.1Sthorpej# fall back to 16bits I/O if 32bits I/O are not functional).
2371.1Sthorpej# Some controllers pass the initial 32bit test, but will fail later.
2381.1Sthorpejwdc0	at isa? port 0x1f0 irq 14 flags 0x00
2391.1Sthorpej
2401.1Sthorpej# IDE drives
2411.1Sthorpej# Flags are used only with controllers that support DMA operations
2421.1Sthorpej# and mode settings (e.g. some pciide controllers)
2431.1Sthorpej# The lowest order four bits (rightmost digit) of the flags define the PIO
2441.1Sthorpej# mode to use, the next set of four bits the DMA mode and the third set the
2451.1Sthorpej# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
2461.1Sthorpej# to use, and the last bit must be 1 for this setting to be used.
2471.1Sthorpej# For DMA and UDMA, 0xf (1111) means 'disable'.
2481.1Sthorpej# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
2491.1Sthorpej# (0xc=1100, 0xa=1010, 0xf=1111)
2501.1Sthorpej# 0x0000 means "use whatever the drive claims to support".
2511.24Scubewd*	at atabus? drive ? flags 0x0000
2521.1Sthorpej
2531.1Sthorpej# Network Interfaces
2541.1Sthorpej
2551.1Sthorpej# PCI network interfaces
2561.1Sthorpejsip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
2571.12Sthorpejwi*	at pci? dev ? function ?	# Intersil Prism Mini-PCI (802.11b)
2581.13Sitojun
2591.13Sitojun# PCMCIA network interfaces
2601.13Sitojunwi*	at pcmcia? function ?		# Lucent/Intersil WaveLan IEEE (802.11)
2611.1Sthorpej
2621.1Sthorpej# MII/PHY support
2631.1Sthorpejnsphyter* at mii? phy ?			# NS83843 PHYs
2641.1Sthorpej
2651.1Sthorpej# Pseudo-Devices
2661.1Sthorpej
2671.1Sthorpej# network pseudo-devices
2681.46Srpaulopseudo-device	bpfilter		# Berkeley packet filter
2691.1Sthorpejpseudo-device	ipfilter		# IP filter (firewall) and NAT
2701.1Sthorpejpseudo-device	loop			# network loopback
2711.47Scube#pseudo-device	ppp			# Point-to-Point Protocol
2721.1Sthorpej#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
2731.47Scube#pseudo-device	sl			# Serial Line IP
2741.47Scube#pseudo-device	strip			# Starmode Radio IP (Metricom)
2751.47Scubepseudo-device	tun			# network tunneling over tty
2761.29Scube#pseudo-device	tap			# virtual Ethernet
2771.47Scube#pseudo-device	gre			# generic L3 over IP tunnel
2781.47Scubepseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
2791.47Scubepseudo-device	faith			# IPv[46] tcp relay translation i/f
2801.47Scubepseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
2811.1Sthorpejpseudo-device	vlan			# IEEE 802.1q encapsulation
2821.1Sthorpejpseudo-device	bridge			# simple inter-network bridging
2831.1Sthorpej
2841.1Sthorpej# miscellaneous pseudo-devices
2851.1Sthorpejpseudo-device	pty			# pseudo-terminals
2861.1Sthorpej#pseudo-device	sequencer	1	# MIDI sequencer
2871.1Sthorpej# rnd works; RND_COM does not on port i386 yet.
2881.1Sthorpejpseudo-device	rnd			# /dev/random and in-kernel generator
2891.1Sthorpej#options 	RND_COM			# use "com" randomness as well (BROKEN)
2901.8Slukempseudo-device	clockctl		# user control of clock subsystem
2911.30Shannken#pseudo-device	fss		4	# file system snapshot device
292