NET4501 revision 1.14
1# $NetBSD: NET4501,v 1.14 2002/08/12 01:03:12 thorpej Exp $ 2# 3# NET4501 -- kernel configuration for a Soekris Engineering net4501 4# single-board computer. 5# 6# http://www.soekris.com/ 7# 8 9include "arch/i386/conf/std.i386" 10 11#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 12 13#ident "NET4501-$Revision: 1.14 $" 14 15maxusers 32 # estimated number of users 16 17# CPU support. At least one is REQUIRED. 18#options I386_CPU 19options I486_CPU 20#options I586_CPU 21#options I686_CPU 22 23makeoptions COPTS="-Os -mcpu=i486" 24options VNODE_OP_NOINLINE 25 26# CPU-related options. 27#options MATH_EMULATE # floating point emulation 28#options VM86 # virtual 8086 emulation 29#options USER_LDT # user-settable LDT; used by WINE 30# eliminate delay no-ops in I/O; recommended on all but very old machines 31options DUMMY_NOPS 32 33#options MTRR # memory-type range register syscall support 34#options PERFCTRS # performance-monitoring counters support 35 36# delay between "rebooting ..." message and hardware reset, in milliseconds 37#options CPURESET_DELAY=2000 38 39# This option allows you to force a serial console at the specified 40# I/O address. see console(4) for details. 41#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600 42# you don't want the option below ON iff you are using the 43# serial console option of the new boot strap code. 44#options CONS_OVERRIDE # Always use above! independent of boot info 45 46# The following options override the memory sizes passed in from the boot 47# block. Use them *only* if the boot block is unable to determine the correct 48# values. Note that the BIOS may *correctly* report less than 640k of base 49# memory if the extended BIOS data area is located at the top of base memory 50# (as is the case on most recent systems). 51#options REALBASEMEM=639 # size of base memory (in KB) 52#options REALEXTMEM=15360 # size of extended memory (in KB) 53 54# Standard system options 55 56options UCONSOLE # users can use TIOCCONS (for xconsole) 57options INSECURE # disable kernel security levels 58 59options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 60options NTP # NTP phase/frequency locked loop 61 62options KTRACE # system call tracing via ktrace(1) 63 64options SYSVMSG # System V-like message queues 65options SYSVSEM # System V-like semaphores 66#options SEMMNI=10 # number of semaphore identifiers 67#options SEMMNS=60 # number of semaphores in system 68#options SEMUME=10 # max number of undo entries per process 69#options SEMMNU=30 # number of undo structures in system 70options SYSVSHM # System V-like memory sharing 71#options SHMMAXPGS=2048 # 2048 pages is the default 72 73options LKM # loadable kernel modules 74 75#options USERCONF # userconf(4) support 76#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 77 78# Diagnostic/debugging support options 79#options DIAGNOSTIC # expensive kernel consistency checks 80#options DEBUG # expensive debugging checks/support 81#options KMEMSTATS # kernel memory statistics (vmstat -m) 82options DDB # in-kernel debugger 83options DDB_HISTORY_SIZE=512 # enable history editing in DDB 84#options KGDB # remote debugger 85#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600 86#makeoptions DEBUG="-g" # compile full symbol table 87 88# Compatibility options 89options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 90options COMPAT_09 # NetBSD 0.9, 91options COMPAT_10 # NetBSD 1.0, 92options COMPAT_11 # NetBSD 1.1, 93options COMPAT_12 # NetBSD 1.2, 94options COMPAT_13 # NetBSD 1.3, 95options COMPAT_14 # NetBSD 1.4, 96options COMPAT_15 # NetBSD 1.5, 97options COMPAT_43 # and 4.3BSD 98options COMPAT_386BSD_MBRPART # recognize old partition ID 99#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 100 101#options COMPAT_SVR4 # binary compatibility with SVR4 102#options COMPAT_IBCS2 # binary compatibility with SCO and ISC 103#options COMPAT_LINUX # binary compatibility with Linux 104#options COMPAT_FREEBSD # binary compatibility with FreeBSD 105#options COMPAT_MACH # binary compatibility with Mach binaries 106#options EXEC_MACHO # exec MACH-O binaries 107#options COMPAT_PECOFF # kernel support to run Win32 apps 108 109# File systems 110file-system FFS # UFS 111#file-system EXT2FS # second extended file system (linux) 112#file-system LFS # log-structured file system 113file-system MFS # memory file system 114file-system NFS # Network File System client 115#file-system NTFS # Windows/NT file system (experimental) 116#file-system CD9660 # ISO 9660 + Rock Ridge file system 117#file-system MSDOSFS # MS-DOS file system 118file-system FDESC # /dev/fd 119file-system KERNFS # /kern 120#file-system NULLFS # loopback file system 121#file-system OVERLAY # overlay file system 122#file-system PORTAL # portal filesystem (still experimental) 123file-system PROCFS # /proc 124#file-system UMAPFS # NULLFS + uid and gid remapping 125#file-system UNION # union file system 126#file-system CODA # Coda File System; also needs vcoda (below) 127 128# File system options 129#options QUOTA # UFS quotas 130#options FFS_EI # FFS Endian Independent support 131options SOFTDEP # FFS soft updates support. 132#options NFSSERVER # Network File System server 133#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 134 # immutable) behave as system flags. 135 136# Networking options 137options GATEWAY # packet forwarding 138options INET # IP + ICMP + TCP + UDP 139options INET6 # IPV6 140#options IPSEC # IP security 141#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 142#options IPSEC_DEBUG # debug for IP security 143options MROUTING # IP multicast routing 144#options NS # XNS 145#options NSIP # XNS tunneling over IP 146#options ISO,TPIP # OSI 147#options EON # OSI tunneling over IP 148#options CCITT,LLC,HDLC # X.25 149#options NETATALK # AppleTalk networking protocols 150#options PPP_BSDCOMP # BSD-Compress compression support for PPP 151#options PPP_DEFLATE # Deflate compression support for PPP 152#options PPP_FILTER # Active filter support for PPP (requires bpf) 153options PFIL_HOOKS # pfil(9) packet filter hooks 154#options IPFILTER_LOG # ipmon(8) log support 155#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 156 157# These options enable verbose messages for several subsystems. 158# Warning, these may compile large string tables into the kernel! 159#options MIIVERBOSE # verbose PHY autoconfig messages 160#options PCIVERBOSE # verbose PCI device autoconfig messages 161#options PCI_CONFIG_DUMP # verbosely dump PCI config space 162 163options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 164 165# Kernel root file system and dump configuration. 166config netbsd root on ? type ? 167#config netbsd root on sd0a type ffs 168#config netbsd root on ? type nfs 169 170# 171# Device configuration 172# 173 174mainbus0 at root 175 176# Basic Bus Support 177 178# PCI bus support 179pci* at mainbus? bus ? 180 181# Configure PCI using BIOS information 182#options PCIBIOS # PCI BIOS support 183#options PCIBIOSVERBOSE # PCI BIOS verbose info 184#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses 185#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering 186#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing 187#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11 188#options PCIBIOS_INTR_GUESS # see pcibios(4) 189#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup 190 191# PCI bridges 192elansc* at pci? dev ? function ? # Elan SC520 System Controller 193 194# ISA bus support 195isa0 at mainbus? 196 197# CardBus bridge support 198cbb* at pci? dev ? function ? 199cardslot* at cbb? 200 201# CardBus bus support 202cardbus* at cardslot? 203pcmcia* at cardslot? 204 205# Coprocessor Support 206 207# Math Coprocessor support 208npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor 209 210# ISA serial interfaces 211com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports 212com1 at isa? port 0x2f8 irq 3 213 214# IDE and related devices 215 216# ISA ST506, ESDI, and IDE controllers 217# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 218# fall back to 16bits I/O if 32bits I/O are not functional). 219# Some controllers pass the initial 32bit test, but will fail later. 220wdc0 at isa? port 0x1f0 irq 14 flags 0x00 221 222# IDE drives 223# Flags are used only with controllers that support DMA operations 224# and mode settings (e.g. some pciide controllers) 225# The lowest order four bits (rightmost digit) of the flags define the PIO 226# mode to use, the next set of four bits the DMA mode and the third set the 227# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 228# to use, and the last bit must be 1 for this setting to be used. 229# For DMA and UDMA, 0xf (1111) means 'disable'. 230# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 231# (0xc=1100, 0xa=1010, 0xf=1111) 232# 0x0000 means "use whatever the drive claims to support". 233wd* at wdc? channel ? drive ? flags 0x0000 234 235# Network Interfaces 236 237# PCI network interfaces 238sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet 239wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b) 240 241# PCMCIA network interfaces 242wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11) 243 244# MII/PHY support 245nsphyter* at mii? phy ? # NS83843 PHYs 246 247# Pseudo-Devices 248 249# network pseudo-devices 250pseudo-device bpfilter 16 # Berkeley packet filter 251pseudo-device ipfilter # IP filter (firewall) and NAT 252pseudo-device loop # network loopback 253#pseudo-device ppp 2 # Point-to-Point Protocol 254#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 255#pseudo-device sl 2 # Serial Line IP 256#pseudo-device strip 2 # Starmode Radio IP (Metricom) 257pseudo-device tun 2 # network tunneling over tty 258#pseudo-device gre 2 # generic L3 over IP tunnel 259pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 260pseudo-device faith 1 # IPv[46] tcp relay translation i/f 261pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 262pseudo-device vlan # IEEE 802.1q encapsulation 263pseudo-device bridge # simple inter-network bridging 264 265# miscellaneous pseudo-devices 266pseudo-device pty # pseudo-terminals 267#pseudo-device tb 1 # tablet line discipline 268#pseudo-device sequencer 1 # MIDI sequencer 269# rnd works; RND_COM does not on port i386 yet. 270pseudo-device rnd # /dev/random and in-kernel generator 271#options RND_COM # use "com" randomness as well (BROKEN) 272pseudo-device clockctl # user control of clock subsystem 273