NET4501 revision 1.89.4.1
1 # $NetBSD: NET4501,v 1.89.4.1 2017/04/21 16:53:28 bouyer Exp $ 2 # 3 # NET4501 -- kernel configuration for a Soekris Engineering net4501 4 # single-board computer. 5 # 6 # http://www.soekris.com/ 7 # 8 9 include "arch/i386/conf/std.i386" 10 11 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 12 13 #ident "NET4501-$Revision: 1.89.4.1 $" 14 15 maxusers 32 # estimated number of users 16 17 # AMD Elan SC520's timer runs at a different frequency 18 options TIMER_FREQ=1189200 19 20 makeoptions COPTS="-Os" 21 22 # CPU-related options. 23 #options VM86 # virtual 8086 emulation 24 #options USER_LDT # user-settable LDT; used by WINE 25 26 #options MTRR # memory-type range register syscall support 27 #options PMC # performance-monitoring counters support 28 29 # delay between "rebooting ..." message and hardware reset, in milliseconds 30 #options CPURESET_DELAY=2000 31 32 # This option allows you to force a serial console at the specified 33 # I/O address. see console(4) for details. 34 #options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600 35 # you don't want the option below ON iff you are using the 36 # serial console option of the new boot strap code. 37 #options CONS_OVERRIDE # Always use above! independent of boot info 38 39 # The following options override the memory sizes passed in from the boot 40 # block. Use them *only* if the boot block is unable to determine the correct 41 # values. Note that the BIOS may *correctly* report less than 640k of base 42 # memory if the extended BIOS data area is located at the top of base memory 43 # (as is the case on most recent systems). 44 #options REALBASEMEM=639 # size of base memory (in KB) 45 #options REALEXTMEM=15360 # size of extended memory (in KB) 46 47 # Standard system options 48 49 options INSECURE # disable kernel security levels 50 51 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 52 options NTP # NTP phase/frequency locked loop 53 54 options KTRACE # system call tracing via ktrace(1) 55 56 options SYSVMSG # System V-like message queues 57 options SYSVSEM # System V-like semaphores 58 #options SEMMNI=10 # number of semaphore identifiers 59 #options SEMMNS=60 # number of semaphores in system 60 #options SEMUME=10 # max number of undo entries per process 61 #options SEMMNU=30 # number of undo structures in system 62 options SYSVSHM # System V-like memory sharing 63 64 options USERCONF # userconf(4) support 65 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 66 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 67 68 # Diagnostic/debugging support options 69 #options DIAGNOSTIC # inexpensive kernel consistency checks 70 #options DEBUG # expensive debugging checks/support 71 options DDB # in-kernel debugger 72 pseudo-device ksyms 73 #options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' 74 options DDB_HISTORY_SIZE=512 # enable history editing in DDB 75 #options KGDB # remote debugger 76 #options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600 77 #makeoptions DEBUG="-g" # compile full symbol table 78 79 # Compatibility options 80 options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI 81 options COMPAT_09 # NetBSD 0.9, 82 options COMPAT_10 # NetBSD 1.0, 83 options COMPAT_11 # NetBSD 1.1, 84 options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI), 85 options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI), 86 options COMPAT_14 # NetBSD 1.4, 87 options COMPAT_15 # NetBSD 1.5, 88 options COMPAT_16 # NetBSD 1.6, 89 options COMPAT_20 # NetBSD 2.0, 90 options COMPAT_30 # NetBSD 3.0, 91 options COMPAT_40 # NetBSD 4.0, 92 options COMPAT_50 # NetBSD 5.0, 93 options COMPAT_60 # NetBSD 6.0, and 94 options COMPAT_70 # NetBSD 7.0 binary compatibility. 95 options COMPAT_43 # 4.3BSD, 386BSD, and BSDI compatibility. 96 options COMPAT_386BSD_MBRPART # recognize old partition ID 97 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 98 99 #options COMPAT_SVR4 # binary compatibility with SVR4 100 #options COMPAT_IBCS2 # binary compatibility with SCO and ISC 101 #options COMPAT_LINUX # binary compatibility with Linux 102 #options COMPAT_FREEBSD # binary compatibility with FreeBSD 103 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 104 105 # File systems 106 file-system FFS # UFS 107 #file-system EXT2FS # second extended file system (linux) 108 #file-system LFS # log-structured file system 109 file-system MFS # memory file system 110 file-system NFS # Network File System client 111 #file-system NTFS # Windows/NT file system (experimental) 112 #file-system CD9660 # ISO 9660 + Rock Ridge file system 113 #file-system MSDOSFS # MS-DOS file system 114 file-system FDESC # /dev/fd 115 file-system KERNFS # /kern 116 #file-system NULLFS # loopback file system 117 #file-system OVERLAY # overlay file system 118 file-system PROCFS # /proc 119 #file-system UMAPFS # NULLFS + uid and gid remapping 120 #file-system UNION # union file system 121 #file-system CODA # Coda File System; also needs vcoda (below) 122 file-system PTYFS # /dev/pts/N support 123 #file-system TMPFS # Efficient memory file-system 124 125 # File system options 126 #options QUOTA # legacy UFS quotas 127 #options QUOTA2 # new, in-filesystem UFS quotas 128 #options FFS_EI # FFS Endian Independent support 129 #options FFS_NO_SNAPSHOT # No FFS snapshot support 130 #options NFSSERVER # Network File System server 131 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 132 # immutable) behave as system flags. 133 134 # Networking options 135 options GATEWAY # packet forwarding 136 options INET # IP + ICMP + TCP + UDP 137 options INET6 # IPv6 138 #options IPSEC # IP security 139 #options IPSEC_DEBUG # debug for IP security 140 options MROUTING # IP multicast routing 141 options PIM # Protocol Independent Multicast 142 #options NETATALK # AppleTalk networking protocols 143 #options PPP_BSDCOMP # BSD-Compress compression support for PPP 144 #options PPP_DEFLATE # Deflate compression support for PPP 145 #options PPP_FILTER # Active filter support for PPP (requires bpf) 146 #options IPFILTER_LOG # ipmon(8) log support 147 #options IPFILTER_LOOKUP # ippool(8) support 148 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 149 150 # These options enable verbose messages for several subsystems. 151 # Warning, these may compile large string tables into the kernel! 152 #options MIIVERBOSE # verbose PHY autoconfig messages 153 #options PCIVERBOSE # verbose PCI device autoconfig messages 154 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 155 156 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 157 158 # Kernel root file system and dump configuration. 159 config netbsd root on ? type ? 160 #config netbsd root on sd0a type ffs 161 #config netbsd root on ? type nfs 162 163 # 164 # Device configuration 165 # 166 167 # Basic Bus Support 168 169 # PCI bus support 170 pci* at elansc? bus ? 171 172 # Configure PCI using BIOS information 173 #options PCIBIOS # PCI BIOS support 174 #options PCIBIOSVERBOSE # PCI BIOS verbose info 175 #options PCI_ADDR_FIXUP # fixup PCI I/O addresses 176 #options PCI_BUS_FIXUP # fixup PCI bus numbering 177 #options PCI_INTR_FIXUP # fixup PCI interrupt routing 178 #options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11 179 #options PCIBIOS_INTR_GUESS # see pcibios(4) 180 #options PCIINTR_DEBUG # super-verbose PCI interrupt fixup 181 182 # PCI bridges 183 elansc* at mainbus? bus ? # Elan SC520 System Controller 184 #elanpar* at elansc? # Programmable Address Regions 185 #elanpex* at elansc? # PCI Exception Instrumentation 186 gpio* at elansc? 187 #gpioow* at gpio? offset 6 mask 0x1 # 1-wire bus bitbanging via gpio 188 #onewire* at gpioow? 189 190 # 1-Wire devices 191 #owtemp* at onewire? # Temperature sensors 192 193 # ISA bus support 194 isa0 at mainbus? 195 196 # CardBus bridge support 197 cbb* at pci? dev ? function ? 198 cardslot* at cbb? 199 200 # CardBus bus support 201 cardbus* at cardslot? 202 pcmcia* at cardslot? 203 204 # Cardbus NICs 205 ath* at cardbus? function ? # Atheros 5210/5211/5212 802.11 206 atw* at cardbus? function ? # ADMtek ADM8211 (802.11) 207 ral* at cardbus? function ? # Ralink RT2x60 (802.11) 208 rtw* at cardbus? function ? # Realtek RTL8180 (802.11) 209 210 # ISA serial interfaces 211 com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports 212 com1 at isa? port 0x2f8 irq 3 213 214 # IDE and related devices 215 216 # ATA (IDE) bus support 217 atabus* at ata? 218 219 # ISA ST506, ESDI, and IDE controllers 220 # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 221 # fall back to 16bits I/O if 32bits I/O are not functional). 222 # Some controllers pass the initial 32bit test, but will fail later. 223 wdc0 at isa? port 0x1f0 irq 14 flags 0x00 224 225 # IDE drives 226 # Flags are used only with controllers that support DMA operations 227 # and mode settings (e.g. some pciide controllers) 228 # The lowest order four bits (rightmost digit) of the flags define the PIO 229 # mode to use, the next set of four bits the DMA mode and the third set the 230 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 231 # to use, and the last bit must be 1 for this setting to be used. 232 # For DMA and UDMA, 0xf (1111) means 'disable'. 233 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 234 # (0xc=1100, 0xa=1010, 0xf=1111) 235 # 0x0000 means "use whatever the drive claims to support". 236 wd* at atabus? drive ? flags 0x0000 237 238 # Network Interfaces 239 240 # PCI network interfaces 241 ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11 242 #ipw* at pci? dev ? function ? # Intel PRO/Wireless 2100 243 #iwi* at pci? dev ? function ? # Intel PRO/Wireless 2200BG 244 sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet 245 wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b) 246 247 # PCI crypto coprocessors 248 hifn* at pci? dev ? function ? # Hifn 7755/7811/795x 249 250 # PCMCIA network interfaces 251 awi* at pcmcia? function ? 252 wi* at pcmcia? function ? # Lucent/Intersil WaveLAN/IEEE (802.11) 253 254 # MII/PHY support 255 nsphyter* at mii? phy ? # NS83843 PHYs 256 257 # Pseudo-Devices 258 259 pseudo-device crypto # opencrypto framework 260 261 # network pseudo-devices 262 pseudo-device bpfilter # Berkeley packet filter 263 pseudo-device ipfilter # IP filter (firewall) and NAT 264 pseudo-device loop # network loopback 265 pseudo-device ppp # Point-to-Point Protocol 266 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 267 #pseudo-device sl # Serial Line IP 268 #pseudo-device strip # Starmode Radio IP (Metricom) 269 pseudo-device tun # network tunneling over tty 270 pseudo-device tap # virtual Ethernet 271 pseudo-device gre # generic L3 over IP tunnel 272 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933) 273 pseudo-device faith # IPv[46] TCP relay translation i/f 274 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 275 pseudo-device vlan # IEEE 802.1q encapsulation 276 pseudo-device bridge # simple inter-network bridging 277 278 # miscellaneous pseudo-devices 279 pseudo-device pty # pseudo-terminals 280 #pseudo-device sequencer # MIDI sequencer 281 # rnd works; RND_COM does not on port i386 yet. 282 #options RND_COM # use "com" randomness as well (BROKEN) 283 pseudo-device clockctl # user control of clock subsystem 284 #pseudo-device fss # file system snapshot device 285
Indexes created Mon Oct 27 02:09:54 GMT 2025