NET4501 revision 1.93       1 # $NetBSD: NET4501,v 1.93 2017/07/29 12:00:56 maxv Exp $
      2 #
      3 # NET4501 -- kernel configuration for a Soekris Engineering net4501
      4 # single-board computer.
      5 #
      6 #	http://www.soekris.com/
      7 #
      8 
      9 include 	"arch/i386/conf/std.i386"
     10 
     11 #options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     12 
     13 #ident 		"NET4501-$Revision: 1.93 $"
     14 
     15 maxusers	32		# estimated number of users
     16 
     17 # AMD Elan SC520's timer runs at a different frequency
     18 options 	TIMER_FREQ=1189200
     19 
     20 makeoptions	COPTS="-Os"
     21 
     22 # CPU-related options.
     23 #options 	VM86		# virtual 8086 emulation
     24 #options 	USER_LDT	# user-settable LDT; used by WINE
     25 
     26 #options 	MTRR		# memory-type range register syscall support
     27 #options 	PMC		# performance-monitoring counters support
     28 
     29 # delay between "rebooting ..." message and hardware reset, in milliseconds
     30 #options 	CPURESET_DELAY=2000
     31 
     32 # This option allows you to force a serial console at the specified
     33 # I/O address.   see console(4) for details.
     34 #options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
     35 #	you don't want the option below ON iff you are using the
     36 #	serial console option of the new boot strap code.
     37 #options 	CONS_OVERRIDE	# Always use above! independent of boot info
     38 
     39 # The following options override the memory sizes passed in from the boot
     40 # block.  Use them *only* if the boot block is unable to determine the correct
     41 # values.  Note that the BIOS may *correctly* report less than 640k of base
     42 # memory if the extended BIOS data area is located at the top of base memory
     43 # (as is the case on most recent systems).
     44 #options 	REALBASEMEM=639		# size of base memory (in KB)
     45 #options 	REALEXTMEM=15360	# size of extended memory (in KB)
     46 
     47 # Standard system options
     48 
     49 options 	INSECURE	# disable kernel security levels
     50 
     51 options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
     52 options 	NTP		# NTP phase/frequency locked loop
     53 
     54 options 	KTRACE		# system call tracing via ktrace(1)
     55 
     56 options 	SYSVMSG		# System V-like message queues
     57 options 	SYSVSEM		# System V-like semaphores
     58 #options 	SEMMNI=10	# number of semaphore identifiers
     59 #options 	SEMMNS=60	# number of semaphores in system
     60 #options 	SEMUME=10	# max number of undo entries per process
     61 #options 	SEMMNU=30	# number of undo structures in system
     62 options 	SYSVSHM		# System V-like memory sharing
     63 
     64 options 	USERCONF	# userconf(4) support
     65 #options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     66 #options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
     67 
     68 # Diagnostic/debugging support options
     69 #options 	DIAGNOSTIC	# inexpensive kernel consistency checks
     70 #options 	DEBUG		# expensive debugging checks/support
     71 options 	DDB		# in-kernel debugger
     72 pseudo-device	ksyms
     73 #options 	DDB_ONPANIC=1	# see also sysctl(7): `ddb.onpanic'
     74 options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
     75 #options 	KGDB		# remote debugger
     76 #options 	KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
     77 #makeoptions	DEBUG="-g"	# compile full symbol table
     78 
     79 # Compatibility options
     80 options 	COMPAT_NOMID	# NetBSD 0.8, 386BSD, and BSDI
     81 options 	COMPAT_09	# NetBSD 0.9,
     82 options 	COMPAT_10	# NetBSD 1.0,
     83 options 	COMPAT_11	# NetBSD 1.1,
     84 options 	COMPAT_12	# NetBSD 1.2 (and 386BSD and BSDI),
     85 options 	COMPAT_13	# NetBSD 1.3 (and 386BSD and BSDI),
     86 options 	COMPAT_14	# NetBSD 1.4,
     87 options 	COMPAT_15	# NetBSD 1.5,
     88 options 	COMPAT_16	# NetBSD 1.6,
     89 options 	COMPAT_20	# NetBSD 2.0,
     90 options 	COMPAT_30	# NetBSD 3.0,
     91 options 	COMPAT_40	# NetBSD 4.0,
     92 options 	COMPAT_50	# NetBSD 5.0,
     93 options 	COMPAT_60	# NetBSD 6.0, and
     94 options 	COMPAT_70	# NetBSD 7.0 binary compatibility.
     95 options 	COMPAT_43	# 4.3BSD, 386BSD, and BSDI compatibility.
     96 options 	COMPAT_386BSD_MBRPART # recognize old partition ID
     97 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     98 
     99 #options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
    100 #options 	COMPAT_LINUX	# binary compatibility with Linux
    101 #options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD
    102 options 	COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
    103 
    104 # File systems
    105 file-system	FFS		# UFS
    106 #file-system	EXT2FS		# second extended file system (linux)
    107 #file-system	LFS		# log-structured file system
    108 file-system	MFS		# memory file system
    109 file-system	NFS		# Network File System client
    110 #file-system	NTFS		# Windows/NT file system (experimental)
    111 #file-system	CD9660		# ISO 9660 + Rock Ridge file system
    112 #file-system	MSDOSFS		# MS-DOS file system
    113 file-system	FDESC		# /dev/fd
    114 file-system	KERNFS		# /kern
    115 #file-system	NULLFS		# loopback file system
    116 #file-system	OVERLAY		# overlay file system
    117 file-system	PROCFS		# /proc
    118 #file-system	UMAPFS		# NULLFS + uid and gid remapping
    119 #file-system	UNION		# union file system
    120 #file-system	CODA		# Coda File System; also needs vcoda (below)
    121 file-system	PTYFS		# /dev/pts/N support
    122 #file-system	TMPFS		# Efficient memory file-system
    123 
    124 # File system options
    125 #options 	QUOTA		# legacy UFS quotas
    126 #options 	QUOTA2		# new, in-filesystem UFS quotas
    127 #options 	FFS_EI		# FFS Endian Independent support
    128 #options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
    129 #options 	NFSSERVER	# Network File System server
    130 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    131 				# immutable) behave as system flags.
    132 
    133 # Networking options
    134 options 	GATEWAY		# packet forwarding
    135 options 	INET		# IP + ICMP + TCP + UDP
    136 options 	INET6		# IPv6
    137 #options 	IPSEC		# IP security
    138 #options 	IPSEC_DEBUG	# debug for IP security
    139 options 	MROUTING	# IP multicast routing
    140 options 	PIM		# Protocol Independent Multicast
    141 #options 	NETATALK	# AppleTalk networking protocols
    142 #options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
    143 #options 	PPP_DEFLATE	# Deflate compression support for PPP
    144 #options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
    145 #options 	IPFILTER_LOG	# ipmon(8) log support
    146 #options 	IPFILTER_LOOKUP	# ippool(8) support
    147 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    148 
    149 # These options enable verbose messages for several subsystems.
    150 # Warning, these may compile large string tables into the kernel!
    151 #options 	MIIVERBOSE	# verbose PHY autoconfig messages
    152 #options 	PCIVERBOSE	# verbose PCI device autoconfig messages
    153 #options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
    154 
    155 options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
    156 
    157 # Kernel root file system and dump configuration.
    158 config		netbsd	root on ? type ?
    159 #config		netbsd	root on sd0a type ffs
    160 #config		netbsd	root on ? type nfs
    161 
    162 #
    163 # Device configuration
    164 #
    165 
    166 # Basic Bus Support
    167 
    168 # PCI bus support
    169 pci*	at elansc? bus ?
    170 
    171 # Configure PCI using BIOS information
    172 #options 	PCIBIOS			# PCI BIOS support
    173 #options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
    174 #options 	PCI_ADDR_FIXUP		# fixup PCI I/O addresses
    175 #options 	PCI_BUS_FIXUP		# fixup PCI bus numbering
    176 #options 	PCI_INTR_FIXUP		# fixup PCI interrupt routing
    177 #options 	PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
    178 #options 	PCIBIOS_INTR_GUESS	# see pcibios(4)
    179 #options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup
    180 
    181 # PCI bridges
    182 elansc* at mainbus? bus ?			# Elan SC520 System Controller
    183 #elanpar*	at elansc?			# Programmable Address Regions
    184 #elanpex*	at elansc?			# PCI Exception Instrumentation
    185 gpio*		at elansc?
    186 #gpioow* 	at gpio? offset 6 mask 0x1	# 1-wire bus bitbanging via gpio
    187 #onewire*	at gpioow?
    188 
    189 # 1-Wire devices
    190 #owtemp* 	at onewire?			# Temperature sensors
    191 
    192 # ISA bus support
    193 isa0	at mainbus?
    194 
    195 # CardBus bridge support
    196 cbb*		at pci? dev ? function ?
    197 cardslot*	at cbb?
    198 
    199 # CardBus bus support
    200 cardbus*	at cardslot?
    201 pcmcia* 	at cardslot?
    202 
    203 # Cardbus NICs
    204 ath*	at cardbus? function ?	# Atheros 5210/5211/5212 802.11
    205 atw*	at cardbus? function ?	# ADMtek ADM8211 (802.11)
    206 ral*	at cardbus? function ?	# Ralink RT2x60 (802.11)
    207 rtw*	at cardbus? function ?	# Realtek RTL8180 (802.11)
    208 
    209 # ISA serial interfaces
    210 com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
    211 com1	at isa? port 0x2f8 irq 3
    212 
    213 # IDE and related devices
    214 
    215 # ATA (IDE) bus support
    216 atabus* at ata?
    217 
    218 # ISA ST506, ESDI, and IDE controllers
    219 # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
    220 # fall back to 16bits I/O if 32bits I/O are not functional).
    221 # Some controllers pass the initial 32bit test, but will fail later.
    222 wdc0	at isa? port 0x1f0 irq 14 flags 0x00
    223 
    224 # IDE drives
    225 # Flags are used only with controllers that support DMA operations
    226 # and mode settings (e.g. some pciide controllers)
    227 # The lowest order four bits (rightmost digit) of the flags define the PIO
    228 # mode to use, the next set of four bits the DMA mode and the third set the
    229 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
    230 # to use, and the last bit must be 1 for this setting to be used.
    231 # For DMA and UDMA, 0xf (1111) means 'disable'.
    232 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
    233 # (0xc=1100, 0xa=1010, 0xf=1111)
    234 # 0x0000 means "use whatever the drive claims to support".
    235 wd*	at atabus? drive ? flags 0x0000
    236 
    237 # Network Interfaces
    238 
    239 # PCI network interfaces
    240 ath*	at pci? dev ? function ?	# Atheros 5210/5211/5212 802.11
    241 #ipw*	at pci? dev ? function ?	# Intel PRO/Wireless 2100
    242 #iwi*	at pci? dev ? function ?	# Intel PRO/Wireless 2200BG
    243 sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
    244 wi*	at pci? dev ? function ?	# Intersil Prism Mini-PCI (802.11b)
    245 
    246 # PCI crypto coprocessors
    247 hifn*	at pci? dev ? function ?	# Hifn 7755/7811/795x
    248 
    249 # PCMCIA network interfaces
    250 awi*	at pcmcia? function ?
    251 wi*	at pcmcia? function ?		# Lucent/Intersil WaveLAN/IEEE (802.11)
    252 
    253 # MII/PHY support
    254 nsphyter* at mii? phy ? 		# NS83843 PHYs
    255 
    256 # Pseudo-Devices
    257 
    258 pseudo-device 	crypto		# opencrypto framework
    259 
    260 # network pseudo-devices
    261 pseudo-device	bpfilter		# Berkeley packet filter
    262 pseudo-device	ipfilter		# IP filter (firewall) and NAT
    263 pseudo-device	loop			# network loopback
    264 pseudo-device	ppp			# Point-to-Point Protocol
    265 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    266 #pseudo-device	sl			# Serial Line IP
    267 #pseudo-device	strip			# Starmode Radio IP (Metricom)
    268 pseudo-device	tun			# network tunneling over tty
    269 pseudo-device	tap			# virtual Ethernet
    270 pseudo-device	gre			# generic L3 over IP tunnel
    271 pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC 1933)
    272 pseudo-device	faith			# IPv[46] TCP relay translation i/f
    273 pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    274 pseudo-device	vlan			# IEEE 802.1q encapsulation
    275 pseudo-device	bridge			# simple inter-network bridging
    276 
    277 # miscellaneous pseudo-devices
    278 pseudo-device	pty			# pseudo-terminals
    279 #pseudo-device	sequencer		# MIDI sequencer
    280 # rnd works; RND_COM does not on port i386 yet.
    281 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    282 pseudo-device	clockctl		# user control of clock subsystem
    283 #pseudo-device	fss			# file system snapshot device
    284