apmvar.h revision 1.7
1 /* $NetBSD: apmvar.h,v 1.7 1998/08/31 23:54:33 jtk Exp $ */ 2 /* 3 * Copyright (c) 1995 John T. Kohl 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 19 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 20 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 21 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 22 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 23 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 25 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 26 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 27 * POSSIBILITY OF SUCH DAMAGE. 28 * 29 */ 30 #ifndef __I386_APM_H__ 31 #define __I386_APM_H__ 32 33 /* Advanced Power Management (v1.0 and v1.1 specification) 34 * functions/defines/etc. 35 */ 36 #define APM_BIOS_FNCODE (0x53) 37 #define APM_SYSTEM_BIOS (0x15) 38 #define APM_BIOS_FN(x) ((APM_BIOS_FNCODE<<8)|(x)) 39 40 /* 41 * APM info bits from BIOS 42 */ 43 #define APM_16BIT_SUPPORT 0x01 44 #define APM_32BIT_SUPPORT 0x02 45 #define APM_CPUIDLE_SLOW 0x04 46 #define APM_DISABLED 0x08 47 #define APM_DISENGAGED 0x10 48 49 #define APM_ERR_CODE(regs) (((regs)->AX & 0xff00) >> 8) 50 #define APM_ERR_PM_DISABLED 0x01 51 #define APM_ERR_REALALREADY 0x02 52 #define APM_ERR_NOTCONN 0x03 53 #define APM_ERR_16ALREADY 0x05 54 #define APM_ERR_16NOTSUPP 0x06 55 #define APM_ERR_32ALREADY 0x07 56 #define APM_ERR_32NOTSUPP 0x08 57 #define APM_ERR_UNRECOG_DEV 0x09 58 #define APM_ERR_ERANGE 0x0A 59 #define APM_ERR_NOTENGAGED 0x0B 60 #define APM_ERR_EOPNOTSUPP 0x0C 61 #define APM_ERR_RTIMER_DISABLED 0x0D 62 #define APM_ERR_UNABLE 0x60 63 #define APM_ERR_NOEVENTS 0x80 64 #define APM_ERR_NOT_PRESENT 0x86 65 66 #define APM_DEV_APM_BIOS 0x0000 67 #define APM_DEV_ALLDEVS 0x0001 68 /* device classes are high byte; device IDs go in low byte */ 69 #define APM_DEV_DISPLAY(x) (0x0100|((x)&0xff)) 70 #define APM_DEV_DISK(x) (0x0200|((x)&0xff)) 71 #define APM_DEV_PARALLEL(x) (0x0300|((x)&0xff)) 72 #define APM_DEV_SERIAL(x) (0x0400|((x)&0xff)) 73 #define APM_DEV_NETWORK(x) (0x0500|((x)&0xff)) 74 #define APM_DEV_PCMCIA(x) (0x0600|((x)&0xff)) 75 #define APM_DEV_ALLUNITS 0xff 76 77 #define APM_INSTALLATION_CHECK 0x00 /* int15 only */ 78 #define APM_INSTALL_SIGNATURE 0x504d /* %bh = 'P', %bl = 'M' */ 79 #define APM_REALMODE_CONNECT 0x01 /* int15 only */ 80 #define APM_16BIT_CONNECT 0x02 /* int15 only */ 81 #define APM_32BIT_CONNECT 0x03 /* int15 only */ 82 #define APM_DISCONNECT 0x04 /* %bx = APM_DEV_APM_BIOS */ 83 #define APM_CPU_IDLE 0x05 84 #define APM_CPU_BUSY 0x06 85 #define APM_SET_PWR_STATE 0x07 86 #define APM_SYS_READY 0x0000 /* %cx */ 87 #define APM_SYS_STANDBY 0x0001 88 #define APM_SYS_SUSPEND 0x0002 89 #define APM_SYS_OFF 0x0003 90 #define APM_LASTREQ_INPROG 0x0004 91 #define APM_LASTREQ_REJECTED 0x0005 92 93 /* system standby is device ID (%bx) 0x0001, APM_SYS_STANDBY */ 94 /* system suspend is device ID (%bx) 0x0001, APM_SYS_SUSPEND */ 95 96 #define APM_PWR_MGT_ENABLE 0x08 97 #define APM_MGT_ALL 0xffff /* %bx */ 98 #define APM_MGT_DISABLE 0x0 /* %cx */ 99 #define APM_MGT_ENABLE 0x1 100 101 #define APM_SYSTEM_DEFAULTS 0x09 102 #define APM_DEFAULTS_ALL 0xffff /* %bx */ 103 #define APM_DEFAULTS_ALL_V12 0x0001 /* %bx */ 104 105 #define APM_POWER_STATUS 0x0a 106 #define APM_AC_OFF 0x00 107 #define APM_AC_ON 0x01 108 #define APM_AC_BACKUP 0x02 109 #define APM_AC_UNKNOWN 0xff 110 /* the first set of battery constants is 1.0 style values; 111 the second set is 1.1 style bit definitions */ 112 #define APM_BATT_HIGH 0x00 113 #define APM_BATT_LOW 0x01 114 #define APM_BATT_CRITICAL 0x02 115 #define APM_BATT_CHARGING 0x03 116 #define APM_BATT_ABSENT 0x04 /* Software only--not in spec! */ 117 #define APM_BATT_UNKNOWN 0xff 118 119 #define APM_BATT_FLAG_HIGH 0x01 120 #define APM_BATT_FLAG_LOW 0x02 121 #define APM_BATT_FLAG_CRITICAL 0x04 122 #define APM_BATT_FLAG_CHARGING 0x08 123 #define APM_BATT_FLAG_NOBATTERY 0x10 124 #define APM_BATT_FLAG_NO_SYSTEM_BATTERY 0x80 125 #define APM_BATT_FLAG_UNKNOWN 0xff 126 127 #define APM_BATT_LIFE_UNKNOWN 0xff 128 #define APM_BATT_STATE(regp) ((regp)->BX & 0xff) 129 #define APM_BATT_FLAGS(regp) (((regp)->CX & 0xff00) >> 8) 130 #define APM_AC_STATE(regp) (((regp)->BX & 0xff00) >> 8) 131 #define APM_BATT_LIFE(regp) ((regp)->CX & 0xff) /* in % */ 132 /* BATT_REMAINING returns minutes remaining */ 133 #define APM_BATT_REMAINING(regp) (((regp)->DX & 0x8000) ? \ 134 ((regp)->DX & 0x7fff) : \ 135 ((regp)->DX & 0x7fff)/60) 136 #define APM_BATT_REM_VALID(regp) (((regp)->DX & 0xffff) != 0xffff) 137 #define APM_BATTERY_COUNT(regp) ((regp)->SI) 138 139 #define APM_GET_PM_EVENT 0x0b 140 #define APM_STANDBY_REQ 0x0001 /* %bx on return */ 141 #define APM_SUSPEND_REQ 0x0002 142 #define APM_NORMAL_RESUME 0x0003 143 #define APM_CRIT_RESUME 0x0004 /* suspend/resume happened 144 without us */ 145 /* If set, the pccard sockets were powered off in the 146 suspend/standby state (V1.2 only) */ 147 #define APM_PCCARD_POWEREDOFF(regp) ((regp)->CX & 0x0001) 148 149 #define APM_BATTERY_LOW 0x0005 150 #define APM_POWER_CHANGE 0x0006 151 #define APM_UPDATE_TIME 0x0007 152 #define APM_CRIT_SUSPEND_REQ 0x0008 153 #define APM_USER_STANDBY_REQ 0x0009 154 #define APM_USER_SUSPEND_REQ 0x000A 155 #define APM_SYS_STANDBY_RESUME 0x000B 156 157 #define APM_GET_POWER_STATE 0x0c 158 /* device to query in %bx */ 159 /* returns power states in %cx */ 160 #define APM_DEVICE_MGMT_ENABLE 0x0d 161 /* device to enable/disable in %bx */ 162 163 #define APM_DRIVER_VERSION 0x0e 164 /* %bx should be DEV value (APM_DEV_APM_BIOS) 165 %ch = driver major vno 166 %cl = driver minor vno 167 return: %ah = conn major; %al = conn minor 168 */ 169 #define APM_CONN_MINOR(regp) ((regp)->AX & 0xff) 170 #define APM_CONN_MAJOR(regp) (((regp)->AX & 0xff00) >> 8) 171 172 #define APM_PWR_MGT_ENGAGE 0x0F 173 /* device in %bx */ 174 #define APM_MGT_DISENGAGE 0x0 /* %cx */ 175 #define APM_MGT_ENGAGE 0x1 176 177 #define APM_GET_CAPABILITIES 0x10 178 /* device in %bx (APM_DEV_APM_BIOS) */ 179 /* %bl: number of batteries */ 180 #define APM_NBATTERIES(regp) ((regp)->BX & 0xff) 181 /* %cx capabilities */ 182 #define APM_GLOBAL_STANDBY 0x0001 183 #define APM_GLOBAL_SUSPEND 0x0002 184 #define APM_RTIMER_STANDBY 0x0004 /* resume timer wakes standby */ 185 #define APM_RTIMER_SUSPEND 0x0008 /* resume timer wakes suspend */ 186 #define APM_IRRING_SUSPEND 0x0010 /* internal ring wakes suspend */ 187 #define APM_IRRING_STANDBY 0x0020 /* internal ring wakes standby */ 188 #define APM_PCRING_SUSPEND 0x0040 /* pccard ring wakes suspend */ 189 #define APM_PCRING_STANDBY 0x0080 /* pccard ring wakes standby */ 190 191 #define APM_RESUME_TIMER_CTL 0x11 /* get/set/disable resume timer */ 192 /* device in %bx (APM_DEV_APM_BIOS) */ 193 /* function code in %cl */ 194 #define APM_RTIMER_DISABLE 0x00 195 #define APM_RTIMER_GET 0x01 196 #define APM_RTIMER_SET 0x02 197 /* if %cl = set, or %cl = get, then: */ 198 /* %ch: seconds */ 199 /* %dh: hours */ 200 /* %dl: minutes */ 201 /* %sih: month (bcd), %sil: day (bcd) */ 202 /* %di: year (bcd, 4 digits) */ 203 #define APM_RESUME_RING_CTL 0x12 204 /* device in %bx (APM_DEV_APM_BIOS) */ 205 /* %cx: function code */ 206 #define APM_RRING_DISABLE 0x0000 207 #define APM_RRING_ENABLE 0x0001 208 #define APM_RRING_GET 0x0002 209 /* returns state in %cx */ 210 #define APM_RRING_DISABLED 0x0000 211 #define APM_RRING_ENABLED 0x0001 212 213 #define APM_TIMER_REQS_CTL 0x13 214 /* device in %bx (APM_DEV_APM_BIOS) */ 215 /* %cx: function code */ 216 #define APM_TIMER_REQS_DISABLE 0x0000 217 #define APM_TIMER_REQS_ENABLE 0x0001 218 #define APM_TIMER_REQS_GET 0x0002 219 /* returns state in %cx */ 220 #define APM_TIMER_REQS_DISABLED 0x0000 221 #define APM_TIEMR_REQS_ENABLED 0x0001 222 223 #define APM_OEM 0x80 224 225 /* 226 * APM info word from the real-mode handler is adjusted to put 227 * major/minor version in low half and support bits in upper half. 228 */ 229 #define APM_MAJOR_VERS(info) (((info)&0xff00)>>8) 230 #define APM_MINOR_VERS(info) ((info)&0xff) 231 232 #define APM_16BIT_SUPPORTED (APM_16BIT_SUPPORT << 16) 233 #define APM_32BIT_SUPPORTED (APM_32BIT_SUPPORT << 16) 234 #define APM_IDLE_SLOWS (APM_CPUIDLE_SLOW << 16) 235 #define APM_BIOS_PM_DISABLED (APM_DISABLED << 16) 236 #define APM_BIOS_PM_DISENGAGED (APM_DISENGAGED << 16) 237 238 /* 239 * virtual & physical address of the trampoline 240 * that we use: page 1. 241 */ 242 #define APM_BIOSTRAMP NBPG 243 244 245 #ifndef _LOCORE 246 247 /* filled in by apmcall */ 248 249 struct apm_connect_info { 250 u_int apm_code32_seg_base; /* real-mode style segment selector */ 251 u_int apm_code16_seg_base; 252 u_int apm_data_seg_base; 253 u_int apm_entrypt; 254 u_short apm_segsel; /* segment selector for APM */ 255 u_short _pad1; 256 u_int apm_code32_seg_len; 257 u_int apm_code16_seg_len; 258 u_int apm_data_seg_len; 259 u_int apm_detail; 260 }; 261 262 struct apm_event_info { 263 u_int type; 264 u_int index; 265 u_int spare[8]; 266 }; 267 268 struct apm_power_info { 269 u_char battery_state; 270 u_char ac_state; 271 u_char battery_life; 272 u_char spare1; 273 u_int minutes_left; /* estimate */ 274 u_int spare2[6]; 275 }; 276 277 struct apm_ctl { 278 u_int dev; 279 u_int mode; 280 }; 281 282 #define APM_IOC_REJECT _IOW('A', 0, struct apm_event_info) /* reject request # */ 283 #define APM_IOC_STANDBY _IO('A', 1) /* put system into standby */ 284 #define APM_IOC_SUSPEND _IO('A', 2) /* put system into suspend */ 285 #define APM_IOC_GETPOWER _IOR('A', 3, struct apm_power_info) /* fetch battery state */ 286 #define APM_IOC_NEXTEVENT _IOR('A', 4, struct apm_event_info) /* fetch event */ 287 #define APM_IOC_DEV_CTL _IOW('A', 5, struct apm_ctl) /* put device into mode */ 288 289 struct apm_attach_args { 290 char *aaa_busname; 291 }; 292 293 #ifdef _KERNEL 294 extern struct apm_connect_info apminfo; /* in locore */ 295 extern int apmpresent; 296 extern int apmcall __P((int function, struct bioscallregs *regs)); 297 extern void bioscall __P((int function, struct bioscallregs *regs)); 298 extern void apm_cpu_busy __P((void)); 299 extern void apm_cpu_idle __P((void)); 300 extern void apminit __P((void)); 301 int apm_set_powstate __P((u_int devid, u_int powstate)); 302 extern int apm_busprobe __P((void)); 303 #endif /* _KERNEL */ 304 #endif /* _LOCORE */ 305 #endif /* __i386_apm_h__ */ 306
Indexes created Sat Sep 27 14:09:57 GMT 2025