xref: /src/sys/arch/ibmnws/conf/GENERIC

#	$NetBSD: GENERIC,v 1.36.6.1 2011/03/05 20:50:50 rmind Exp $
#
#

include "arch/ibmnws/conf/std.ibmnws"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#makeoptions	COPTS="-Os -mmultiple"	# -Os -mmultiple to reduce size.

# Console settings
options 	CONSOLE="\"genfb\""
#options		CONSOLE="\"com\""
options		CONSOLE_SPEED=9600
options		CONSOLE_ADDR=0x3f8

# Enable the hooks used for initializing the ram-disk.
options 	MEMORY_DISK_HOOKS
options 	MEMORY_DISK_IS_ROOT		# Force root on ram-disk
options 	MEMORY_DISK_ROOT_SIZE=4096	# 2 Megabytes
options 	MEMORY_DISK_RBFLAGS=RB_SINGLE	# boot in single-user mode

maxusers	8

options 	DDB

# Compatibility options
#options 	COMPAT_13	# NetBSD 1.3,
#options 	COMPAT_14	# NetBSD 1.4,
#options 	COMPAT_15	# NetBSD 1.5,
options 	COMPAT_16	# NetBSD 1.6,
#options 	COMPAT_43	# and 4.3BSD
options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.

# File systems
#file-system 	FFS		# UFS
#file-system	EXT2FS		# second extended file system (linux)
#file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
#file-system 	MSDOSFS		# MS-DOS file system
file-system	KERNFS		# kernel data-structure filesystem
file-system	PROCFS		# /proc
#file-system	PTYFS		# /dev/pts/N support
file-system	TMPFS		# Efficient memory file-system
#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system

# File system options
#options 	FFS_EI		# FFS Endian Independant support
#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
 				# immutable) behave as system flags.
options 	WAPBL		# File system journaling support - Experimental

#options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing
# options 	NFS_BOOT_BOOTPARAM
options 	NFS_BOOT_DHCP

#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
#options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
#options 	PCDISPLAY_SOFTCURSOR

# Kernel root file system and dump configuration.
config	netbsd	root on ? type ?


#
# Device configuration
#

mainbus0 at root
cpu0	at mainbus0


# Basic Bus Support

# PCI bus support
pci0	at mainbus0 bus ?
pci*	at pchb? bus ?

options 	PCIVERBOSE

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges

# ISA bus support
isa*	at pcib?			# ISA on PCI-ISA bridge

# PCMCIA bus support
# pcmcia* at pcic? controller ? socket ?

# ISA PCMCIA controllers
# pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000

#options 	PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14
#options 	PCIC_ISA_ALLOC_IOBASE=0x0400
#options 	PCIC_ISA_ALLOC_IOSIZE=0x0100

# ISA Plug-and-Play bus support
# isapnp0 at isa?

# on-board I/O for IBM Personal Power Series 830 IDE controller
# obio0	at mainbus0


# Console Devices

# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
# vga*		at pci?
# wsdisplay*	at vga? console ?
genfb*		at pci? dev ? function ?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0

# make sure the console display is always wsdisplay0 XXX Why?
wsdisplay0      at wsemuldisplaydev? console 1
wsdisplay*      at wsemuldisplaydev?

# attimer0	at isa?
# pcppi0	at isa?				# PC prog. periph. interface
# isabeep0 at pcppi?			# "keyboard" beep

# mcclock0 at isa? port 0x70		# mc146818 and compatible


# Serial Devices

# ISA serial interfaces
com0	at isa? port 0x3f8 irq 4	# standard PC serial ports
com1	at isa? port 0x2f8 irq 3

# Parallel Printer Interfaces

# ISA parallel printer interfaces
lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports


# SCSI Controllers and Devices

# PCI SCSI controllers
# adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
# ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
# iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
# pcscp* 	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
# siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI

# PCMCIA SCSI controllers
# aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
# spc* 	at pcmcia? function ?		# Fujitsu MB87030/MB89352 SCSI

# SCSI bus support
# scsibus* at adw?
# scsibus* at ahc?
# scsibus* at aic?
# scsibus* at iha?
# scsibus* at pcscp?
# scsibus* at siop?
# scsibus* at spc?

# SCSI devices
# sd*	at scsibus? target ? lun ?	# SCSI disk drives
# st*	at scsibus? target ? lun ?	# SCSI tape drives
# cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives


# IDE and related devices

# IBM Personal Power Series 830 IDE controller
# wdc0	at obio? port 0x1f0 irq 13
# wdc1	at obio? port 0x170 irq 13

# ISA Plug-and-Play IDE controllers
# wdc*	at isapnp?

# PCMCIA IDE controllers
# wdc*	at pcmcia? function ?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
# wd*	at wdc? channel ? drive ? flags 0x0000

# ATAPI bus support
# atapibus* at wdc? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
# cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
# sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives

# Miscellaneous mass storage devices

# ISA floppy
# fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
# fd*	at fdc? drive ?

# Network Interfaces

# PCI network interfaces
pcn*	at pci? dev ? function ?	# AMD PCnet-PCI Ethernet

# PCMCIA network interfaces
# ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
# ne*	at pcmcia? function ?		# NE2000-compatible Ethernet

# MII/PHY support
#acphy*  at mii? phy ?                   # DAltima AC101 and AMD Am79c874 PHYs
#amhphy* at mii? phy ?                   # AMD 79c901 Ethernet PHYs
#bmtphy* at mii? phy ?                   # Broadcom BCM5201 and BCM5202 PHYs
#brgphy* at mii? phy ?                   # Broadcom BCM5400-family PHYs
#dmphy*  at mii? phy ?                   # Davicom DM9101 PHYs
#exphy*  at mii? phy ?                   # 3Com internal PHYs
#gentbi* at mii? phy ?                   # Generic Ten-Bit 1000BASE-[CLS]X PHYs
#glxtphy* at mii? phy ?                  # Level One LXT-1000 PHYs
#gphyter* at mii? phy ?                  # NS83861 Gig-E PHY
icsphy* at mii? phy ?                   # Integrated Circuit Systems ICS189x
#inphy*  at mii? phy ?                   # Intel 82555 PHYs
#iophy*  at mii? phy ?                   # Intel 82553 PHYs
#lxtphy* at mii? phy ?                   # Level One LXT-970 PHYs
#makphy* at mii? phy ?                   # Marvell Semiconductor 88E1000 PHYs
#nsphy*  at mii? phy ?                   # NS83840 PHYs
#nsphyter* at mii? phy ?                 # NS83843 PHYs
#pnaphy* at mii? phy ?                   # generic HomePNA PHYs
#qsphy*  at mii? phy ?                   # Quality Semiconductor QS6612 PHYs
#sqphy*  at mii? phy ?                   # Seeq 80220/80221/80223 PHYs
#tlphy*  at mii? phy ?                   # ThunderLAN PHYs
#tqphy*  at mii? phy ?                   # TDK Semiconductor PHYs
#ukphy*  at mii? phy ?                   # generic unknown PHYs
#urlphy* at mii? phy ?                   # Realtek RTL8150L internal PHYs

# Audio support
paud0 at isa? port 0x830 irq 10 drq 0 drq2 1
audio*	at audiobus?

# Pseudo-Devices

# disk/mass storage pseudo-devices
pseudo-device	md			# memory disk device (ramdisk)

# network pseudo-devices
pseudo-device	bpfilter		# network tap
#pseudo-device	carp			# Common Address Redundancy Protocol
pseudo-device	loop			# network loopback

#
# accept filters
pseudo-device   accf_data		# "dataready" accept filter
pseudo-device   accf_http		# "httpready" accept filter

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well
pseudo-device	ksyms
pseudo-device	clockctl

# Veriexec
#
# a pseudo device needed for veriexec
#pseudo-device	veriexec		1
#
# Uncomment the fingerprint methods below that are desired. Note that
# removing fingerprint methods will have almost no impact on the kernel
# code size.
#
#options VERIFIED_EXEC_FP_RMD160
#options VERIFIED_EXEC_FP_SHA256
#options VERIFIED_EXEC_FP_SHA384
#options VERIFIED_EXEC_FP_SHA512
#options VERIFIED_EXEC_FP_SHA1
#options VERIFIED_EXEC_FP_MD5