xref: /src/sys/arch/luna68k/conf/GENERIC

# $NetBSD: GENERIC,v 1.64 2005/08/19 05:19:53 christos Exp $
#
# GENERIC machine description file
# 
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include		"arch/luna68k/conf/std.luna68k"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident 		"GENERIC-$Revision: 1.64 $"

maxusers	8

options 	M68030
#options 	M68040
#options 	FPSP	# on m68040 to emulate some missing FP instructions

# Needs to be set per system.  i.e change these as you see fit

# Standard system options
options 	NTP			# NTP phase/frequency locked loop
options 	KTRACE
options 	SYSTRACE	# system call vetting via systrace(1)
#options 	SYSVMSG			# System V message queues
#options 	SYSVSEM			# System V semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
#options 	SYSVSHM			# System V shared memory
#optoins 	SHMMAXPGS=1024		# 1024 pages is the default
#options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
#options 	LKM			# loadable kernel modules
options 	USERCONF		# userconf(4) support
#options	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Enable experimental buffer queue strategy for better responsiveness under 
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options 	BUFQ_READPRIO
#options 	BUFQ_PRIOCSCAN

# Debugging options
options 	DDB
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	SYMTAB_SPACE=72000	# place DDB symbols in data segment
#options 	DEBUG			# extra kernel debugging support
#options 	DIAGNOSTIC		# extra kernel sanity checking
#options 	SCSIVERBOSE		# Verbose SCSI errors
#options 	SCSIDEBUG
#makeoptions	DEBUG="-g"		# compile full symbol table

# Compatibility options
options 	COMPAT_43	# and 4.3BSD and ...
options 	COMPAT_12	# NetBSD 1.2 binary compatibility
options 	COMPAT_13	# NetBSD 1.3 binary compatibility
options 	COMPAT_14	# NetBSD 1.4 binary compatibility
options 	COMPAT_15	# NetBSD 1.5 binary compatibility
options 	COMPAT_16	# NetBSD 1.6 binary compatibility
options 	COMPAT_20	# NetBSD 2.0 binary compatibility
options 	COMPAT_30	# NetBSD 3.0 compatibility.
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
options 	EXEC_AOUT	# support for a.out executables
options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.

# Filesystem options
file-system 	FFS		# ufs file system
#file-system	LFS		# log-structured file system
file-system 	NFS		# nfs client support
file-system	MFS
#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
#file-system	MSDOSFS		# MS-DOS FAT file system
file-system 	KERNFS		# /kern
file-system 	PROCFS		# /proc
#file-system 	FDESC		# /dev/fd/*
file-system 	NULLFS		# loopback file system
#file-system	PORTAL		# portal filesystem (still experimental)
#file-system	UMAPFS		# NULLFS + uid and gid remapping
#file-system 	UNION		# union file system
#file-system	CODA		# Coda File System; also needs vcode (below)
file-system	PTYFS		# /dev/pts/N support

#options 	NFSSERVER	# nfs server support
#options 	QUOTA		# ffs quotas
#options 	FFS_EI		# ffs endian independant support
options 	SOFTDEP		# ffs soft updates support
#options 	FFS_NO_SNAPSHOT	# ffs snapshots
#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental

# Networking options
options 	INET		# IP prototol stack support
#options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY		# IP packet forwarding
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
options 	NFS_BOOT_DHCP	# superset of BOOTP
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

# WS console uses SUN or VT100 terminal emulation
options 	WSEMUL_VT100

config		netbsd root on ? type ?

mainbus0 at root

clock0	at mainbus0

# uPD7201 SIO
sio0	at mainbus0
siotty0	at sio0			# ttya
ws0	at sio0			# port for keyboard and mouse
# AM7990 LANCE
le0	at mainbus0
# MB89532 SPC
spc0	at mainbus0
#spc1	at mainbus0		# 2nd SCSI on LUNA-II
# framebuffer
fb0	at mainbus0		# 16 or 256 pseudo color

# Workstation Console attachments
wsdisplay*	at fb?
wskbd*		at ws? console ?
wsmouse*	at ws?

# SCSI bus support
scsibus* at spc?

# SCSI devices
sd* at scsibus? target ? lun ?		# SCSI disks
st* at scsibus? target ? lun ?		# SCSI tapes
#cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
#ch* at scsibus? target ? lun ?		# SCSI changer devices
#ss* at scsibus? target ? lun ?		# SCSI scanners
#uk* at scsibus? target ? lun ?		# unknown SCSI devices

pseudo-device	bpfilter	2	# Berkeley Packet Filter
#pseudo-device	ccd		2	# concatenated and striped disks
#pseudo-device	cgd		2	# cryptographic disks
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	ipfilter	1	# ip filter
pseudo-device	loop		1	# loopback interface; required
pseudo-device	md		1	# memory disk device
#pseudo-device	ppp		1	# PPP interfaces
#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
pseudo-device	pty			# pseudo-terminals
#pseudo-device	raid		2	# RAIDframe disk driver
pseudo-device	fss		4	# file system snapshot device
#pseudo-device	sl		1	# SLIP interfaces
#pseudo-device	tun		2	# Network "tunnel" device
#pseudo-device	tap			# virtual Ethernet
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
#pseudo-device	vnd		2	# disk-like interface to files
#options 	VND_COMPRESSION		# compressed vnd(4)
pseudo-device	rnd			# /dev/random and in-kernel generator
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms
#pseudo-device	pf			# PF packet filter
#pseudo-device	pflog			# PF log if