GENERIC revision 1.49
1# $NetBSD: GENERIC,v 1.49 2004/09/04 23:29:50 manu Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include		"arch/luna68k/conf/std.luna68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.49 $"
26
27maxusers	8
28
29options 	M68030
30#options 	M68040
31#options 	FPSP	# on m68040 to emulate some missing FP instructions
32
33# Needs to be set per system.  i.e change these as you see fit
34
35# Standard system options
36options 	NTP			# NTP phase/frequency locked loop
37options 	KTRACE
38options 	SYSTRACE	# system call vetting via systrace(1)
39#options 	SYSVMSG			# System V message queues
40#options 	SYSVSEM			# System V semaphores
41#options 	SEMMNI=10	# number of semaphore identifiers
42#options 	SEMMNS=60	# number of semaphores in system
43#options 	SEMUME=10	# max number of undo entries per process
44#options 	SEMMNU=30	# number of undo structures in system
45#options 	SYSVSHM			# System V shared memory
46#optoins 	SHMMAXPGS=1024		# 1024 pages is the default
47#options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
48#options 	LKM			# loadable kernel modules
49options 	USERCONF		# userconf(4) support
50#options	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
51options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
52
53# Enable experimental buffer queue strategy for better responsiveness under 
54# high disk I/O load. Use it with caution - it's not proven to be stable yet.
55#options 	NEW_BUFQ_STRATEGY
56
57# Debugging options
58options 	DDB
59#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
60#options 	SYMTAB_SPACE=72000	# place DDB symbols in data segment
61#options 	DEBUG			# extra kernel debugging support
62#options 	DIAGNOSTIC		# extra kernel sanity checking
63#options 	SCSIVERBOSE		# Verbose SCSI errors
64#options 	SCSIDEBUG
65#makeoptions	DEBUG="-g"		# compile full symbol table
66
67# Compatibility options
68options 	COMPAT_43	# and 4.3BSD and ...
69options 	COMPAT_12	# NetBSD 1.2 binary compatibility
70options 	COMPAT_13	# NetBSD 1.3 binary compatibility
71options 	COMPAT_14	# NetBSD 1.4 binary compatibility
72options 	COMPAT_15	# NetBSD 1.5 binary compatibility
73options 	COMPAT_16	# NetBSD 1.6 binary compatibility
74#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
75options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
76options 	EXEC_AOUT	# support for a.out executables
77
78# Filesystem options
79file-system 	FFS		# ufs file system
80#file-system	LFS		# log-structured file system
81file-system 	NFS		# nfs client support
82file-system	MFS
83#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
84#file-system	MSDOSFS		# MS-DOS FAT file system
85file-system 	KERNFS		# /kern
86file-system 	PROCFS		# /proc
87#file-system 	FDESC		# /dev/fd/*
88file-system 	NULLFS		# loopback file system
89#file-system	PORTAL		# portal filesystem (still experimental)
90#file-system	UMAPFS		# NULLFS + uid and gid remapping
91#file-system 	UNION		# union file system
92#file-system	CODA		# Coda File System; also needs vcode (below)
93
94#options 	NFSSERVER	# nfs server support
95#options 	QUOTA		# ffs quotas
96#options 	FFS_EI		# ffs endian independant support
97options 	SOFTDEP		# ffs soft updates support
98
99# Networking options
100options 	INET		# IP prototol stack support
101#options 	INET6		# IPV6
102#options 	IPSEC		# IP security
103#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
104#options 	IPSEC_DEBUG	# debug for IP security
105#options 	GATEWAY		# IP packet forwarding
106#options 	MROUTING	# IP multicast routing
107#options 	PIM		# Protocol Independent Multicast
108#options 	NS		# XNS
109#options 	NSIP		# XNS tunneling over IP
110#options 	ISO,TPIP	# OSI
111#options 	EON		# OSI tunneling over IP
112#options 	CCITT,LLC,HDLC	# X.25
113#options 	NETATALK	# AppleTalk networking protocols
114#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
115#options 	PPP_DEFLATE	# Deflate compression support for PPP
116#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
117#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
118#options 	IPFILTER_LOG	# ipmon(8) log support
119#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
120options 	NFS_BOOT_DHCP	# superset of BOOTP
121#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
122
123#options 	ALTQ		# Manipulate network interfaces' output queues
124#options 	ALTQ_BLUE	# Stochastic Fair Blue
125#options 	ALTQ_CBQ	# Class-Based Queueing
126#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
127#options 	ALTQ_FIFOQ	# First-In First-Out Queue
128#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
129#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
130#options 	ALTQ_LOCALQ	# Local queueing discipline
131#options 	ALTQ_PRIQ	# Priority Queueing
132#options 	ALTQ_RED	# Random Early Detection
133#options 	ALTQ_RIO	# RED with IN/OUT
134#options 	ALTQ_WFQ	# Weighted Fair Queueing
135
136# WS console uses SUN or VT100 terminal emulation
137options 	WSEMUL_VT100
138
139config		netbsd root on ? type ?
140
141mainbus0 at root
142
143clock0	at mainbus0
144
145# uPD7201 SIO
146sio0	at mainbus0
147siotty0	at sio0			# ttya
148ws0	at sio0			# port for keyboard and mouse
149# AM7990 LANCE
150le0	at mainbus0
151# MB89532 SPC
152spc0	at mainbus0
153#spc1	at mainbus0		# 2nd SCSI on LUNA-II
154# framebuffer
155fb0	at mainbus0		# 16 or 256 pseudo color
156
157# Workstation Console attachments
158wsdisplay*	at fb?
159wskbd*		at ws? console ?
160wsmouse*	at ws?
161
162# SCSI bus support
163scsibus* at spc?
164
165# SCSI devices
166sd* at scsibus? target ? lun ?		# SCSI disks
167st* at scsibus? target ? lun ?		# SCSI tapes
168#cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
169#ch* at scsibus? target ? lun ?		# SCSI changer devices
170#ss* at scsibus? target ? lun ?		# SCSI scanners
171#uk* at scsibus? target ? lun ?		# unknown SCSI devices
172
173pseudo-device	bpfilter	2	# Berkeley Packet Filter
174#pseudo-device	ccd		2	# concatenated and striped disks
175#pseudo-device	cgd		2	# cryptographic disks
176#pseudo-device	gre		2	# generic L3 over IP tunnel
177#pseudo-device	ipfilter	1	# ip filter
178pseudo-device	loop		1	# loopback interface; required
179pseudo-device	md		1	# memory disk device
180#pseudo-device	ppp		1	# PPP interfaces
181#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
182pseudo-device	pty			# pseudo-terminals
183#pseudo-device	raid		2	# RAIDframe disk driver
184#pseudo-device	sl		1	# SLIP interfaces
185#pseudo-device	tun		2	# Network "tunnel" device
186pseudo-device	vlan			# IEEE 802.1q encapsulation
187pseudo-device	bridge			# simple inter-network bridging
188#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
189#pseudo-device	vnd		2	# disk-like interface to files
190pseudo-device	rnd			# /dev/random and in-kernel generator
191pseudo-device	clockctl		# user control of clock subsystem
192pseudo-device	ksyms			# /dev/ksyms
193#pseudo-device	pf			# PF packet filter
194#pseudo-device	pflog			# PF log if
195