Home | History | Annotate | Line # | Download | only in dev
lcd.c revision 1.7 
      1 /* $NetBSD: lcd.c,v 1.7 2011/11/12 13:44:26 tsutsui Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 2000 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Tohru Nishimura.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29  * POSSIBILITY OF SUCH DAMAGE.
     30  */
     31 
     32 #include <sys/cdefs.h>		/* RCS ID & Copyright macro defns */
     33 
     34 __KERNEL_RCSID(0, "$NetBSD: lcd.c,v 1.7 2011/11/12 13:44:26 tsutsui Exp $");
     35 
     36 /*
     37  * XXX
     38  * Following code segments are subject to change.
     39  * XXX
     40  */
     41 
     42 #include <sys/param.h>
     43 #include <sys/systm.h>
     44 #include <sys/device.h>
     45 
     46 #include <machine/cpu.h>
     47 
     48 #define PIO1_MODE_OUTPUT	0x84
     49 #define PIO1_MODE_INPUT		0x94
     50 
     51 #define POWER	0x10
     52 
     53 #define ENABLE	0x80
     54 #define DISABLE	0x00
     55 
     56 #define WRITE_CMD	(0x00 | 0x00)
     57 #define WRITE_DATA	(0x00 | 0x40)
     58 #define READ_BUSY	(0x20 | 0x00)
     59 #define READ_DATA	(0x20 | 0x40)
     60 
     61 #define LCD_INIT	0x38
     62 #define LCD_ENTRY	0x06
     63 #define LCD_ON		0x0c
     64 #define LCD_CLS		0x01
     65 #define LCD_HOME	0x02
     66 #define LCD_LOCATE(X, Y)	(((Y) & 1 ? 0xc0 : 0x80) | ((X) & 0x0f))
     67 
     68 struct pio {
     69 	volatile u_int8_t portA;
     70 	volatile u_int8_t portB;
     71 	volatile u_int8_t portC;
     72 	volatile u_int8_t cntrl;
     73 };
     74 
     75 void lcdbusywait(void);
     76 void lcdput(int);
     77 void lcdctrl(int);
     78 void lcdshow(char *);
     79 void greeting(void);
     80 			       /* "1234567890123456" */
     81 static char lcd_boot_message1[] = " NetBSD/luna68k ";
     82 static char lcd_boot_message2[] = "   SX-9100/DT   ";
     83 
     84 void
     85 lcdbusywait(void)
     86 {
     87 	struct pio *p1 = (struct pio *)0x4D000000;
     88 	int msb, s;
     89 
     90 	s = splhigh();
     91 	p1->cntrl = PIO1_MODE_INPUT;
     92 	p1->portC = POWER | READ_BUSY | ENABLE;
     93 	splx(s);
     94 
     95 	do {
     96 		msb = p1->portA & ENABLE;
     97 		delay(5);
     98 	} while (msb != 0);
     99 
    100 	s = splhigh();
    101 	p1->portC = POWER | READ_BUSY | DISABLE;
    102 	splx(s);
    103 }
    104 
    105 void
    106 lcdput(int cc)
    107 {
    108 	struct pio *p1 = (struct pio *)0x4D000000;
    109 	int s;
    110 
    111 	lcdbusywait();
    112 
    113 	s = splhigh();
    114 	p1->cntrl = PIO1_MODE_OUTPUT;
    115 
    116 	p1->portC = POWER | WRITE_DATA | ENABLE;
    117 	p1->portA = cc;
    118 	p1->portC = POWER | WRITE_DATA | DISABLE;
    119 	splx(s);
    120 }
    121 
    122 void
    123 lcdctrl(int cc)
    124 {
    125 	struct pio *p1 = (struct pio *)0x4D000000;
    126 	int s;
    127 
    128 	lcdbusywait();
    129 
    130 	s = splhigh();
    131 	p1->cntrl = PIO1_MODE_OUTPUT;
    132 
    133 	p1->portC = POWER | WRITE_CMD | ENABLE;
    134 	p1->portA = cc;
    135 	p1->portC = POWER | WRITE_CMD | DISABLE;
    136 	splx(s);
    137 }
    138 
    139 void
    140 lcdshow(char *s)
    141 {
    142 	int cc;
    143 
    144 	while ((cc = *s++) != '\0')
    145 		lcdput(cc);
    146 }
    147 
    148 void
    149 greeting(void)
    150 {
    151 	lcdctrl(LCD_INIT);
    152 	lcdctrl(LCD_ENTRY);
    153 	lcdctrl(LCD_ON);
    154 
    155 	lcdctrl(LCD_CLS);
    156 	lcdctrl(LCD_HOME);
    157 
    158 	lcdctrl(LCD_LOCATE(0, 0));
    159 	lcdshow(lcd_boot_message1);
    160 	lcdctrl(LCD_LOCATE(0, 1));
    161 	if (machtype == LUNA_II)
    162 		lcd_boot_message2[13] = '2';
    163 	lcdshow(lcd_boot_message2);
    164 }
    165