if_ae.c revision 1.70 1 /* $NetBSD: if_ae.c,v 1.70 2000/09/13 05:21:16 scottr Exp $ */
2
3 /*
4 * Device driver for National Semiconductor DS8390/WD83C690 based ethernet
5 * adapters.
6 *
7 * Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved.
8 *
9 * Copyright (C) 1993, David Greenman. This software may be used, modified,
10 * copied, distributed, and sold, in both source and binary form provided that
11 * the above copyright and these terms are retained. Under no circumstances is
12 * the author responsible for the proper functioning of this software, nor does
13 * the author assume any responsibility for damages incurred with its use.
14 */
15
16 #include "bpfilter.h"
17
18 #include <sys/param.h>
19 #include <sys/systm.h>
20 #include <sys/device.h>
21 #include <sys/mbuf.h>
22 #include <sys/socket.h>
23
24 #include <net/if.h>
25 #include <net/if_media.h>
26 #include <net/if_ether.h>
27
28 #include <machine/bus.h>
29
30 #include <dev/ic/dp8390reg.h>
31 #include <dev/ic/dp8390var.h>
32 #include <mac68k/dev/if_aevar.h>
33
34 int
35 ae_size_card_memory(bst, bsh, ofs)
36 bus_space_tag_t bst;
37 bus_space_handle_t bsh;
38 int ofs;
39 {
40 int i1, i2, i3, i4;
41
42 /*
43 * banks; also assume it will generally mirror in upper banks
44 * if not installed.
45 */
46 i1 = (8192 * 0);
47 i2 = (8192 * 1);
48 i3 = (8192 * 2);
49 i4 = (8192 * 3);
50
51 bus_space_write_2(bst, bsh, ofs + i1, 0x1111);
52 bus_space_write_2(bst, bsh, ofs + i2, 0x2222);
53 bus_space_write_2(bst, bsh, ofs + i3, 0x3333);
54 bus_space_write_2(bst, bsh, ofs + i4, 0x4444);
55
56 if (bus_space_read_2(bst, bsh, ofs + i1) == 0x1111 &&
57 bus_space_read_2(bst, bsh, ofs + i2) == 0x2222 &&
58 bus_space_read_2(bst, bsh, ofs + i3) == 0x3333 &&
59 bus_space_read_2(bst, bsh, ofs + i4) == 0x4444)
60 return 8192 * 4;
61
62 if ((bus_space_read_2(bst, bsh, ofs + i1) == 0x1111 &&
63 bus_space_read_2(bst, bsh, ofs + i2) == 0x2222) ||
64 (bus_space_read_2(bst, bsh, ofs + i1) == 0x3333 &&
65 bus_space_read_2(bst, bsh, ofs + i2) == 0x4444))
66 return 8192 * 2;
67
68 if (bus_space_read_2(bst, bsh, ofs + i1) == 0x1111 ||
69 bus_space_read_2(bst, bsh, ofs + i1) == 0x4444)
70 return 8192;
71
72 return 0;
73 }
74
75 /*
76 * Zero memory and verify that it is clear. The only difference between
77 * this and the default test_mem function is that the DP8390-based NuBus
78 * cards * apparently require word-wide writes and byte-wide reads, an
79 * `interesting' combination.
80 */
81 int
82 ae_test_mem(sc)
83 struct dp8390_softc *sc;
84 {
85 bus_space_tag_t buft = sc->sc_buft;
86 bus_space_handle_t bufh = sc->sc_bufh;
87 int i;
88
89 bus_space_set_region_2(buft, bufh, sc->mem_start, 0,
90 sc->mem_size / 2);
91
92 for (i = 0; i < sc->mem_size; ++i) {
93 if (bus_space_read_1(sc->sc_buft, sc->sc_bufh, i)) {
94 printf(": failed to clear NIC buffer at offset %x - "
95 "check configuration\n", (sc->mem_start + i));
96 return 1;
97 }
98 }
99
100 return 0;
101 }
102
103 /*
104 * Copy packet from mbuf to the board memory Currently uses an extra
105 * buffer/extra memory copy, unless the whole packet fits in one mbuf.
106 *
107 * As in the test_mem function, we use word-wide writes.
108 */
109 int
110 ae_write_mbuf(sc, m, buf)
111 struct dp8390_softc *sc;
112 struct mbuf *m;
113 int buf;
114 {
115 u_char *data, savebyte[2];
116 int len, wantbyte;
117 u_short totlen = 0;
118
119 wantbyte = 0;
120
121 for (; m ; m = m->m_next) {
122 data = mtod(m, u_char *);
123 len = m->m_len;
124 totlen += len;
125 if (len > 0) {
126 /* Finish the last word. */
127 if (wantbyte) {
128 savebyte[1] = *data;
129 bus_space_write_region_2(sc->sc_buft,
130 sc->sc_bufh, buf, (u_int16_t *)savebyte, 1);
131 buf += 2;
132 data++;
133 len--;
134 wantbyte = 0;
135 }
136 /* Output contiguous words. */
137 if (len > 1) {
138 bus_space_write_region_2(
139 sc->sc_buft, sc->sc_bufh,
140 buf, (u_int16_t *)data, len >> 1);
141 buf += len & ~1;
142 data += len & ~1;
143 len &= 1;
144 }
145 /* Save last byte, if necessary. */
146 if (len == 1) {
147 savebyte[0] = *data;
148 wantbyte = 1;
149 }
150 }
151 }
152
153 if (wantbyte) {
154 savebyte[1] = 0;
155 bus_space_write_region_2(sc->sc_buft, sc->sc_bufh,
156 buf, (u_int16_t *)savebyte, 1);
157 }
158 return (totlen);
159 }
160