pm_direct.c revision 1.30.4.1
1 /* $NetBSD: pm_direct.c,v 1.30.4.1 2024/05/11 14:46:26 martin Exp $ */ 2 3 /* 4 * Copyright (C) 1997 Takashi Hamada 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Takashi Hamada 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 /* From: pm_direct.c 1.3 03/18/98 Takashi Hamada */ 33 34 #include <sys/cdefs.h> 35 __KERNEL_RCSID(0, "$NetBSD: pm_direct.c,v 1.30.4.1 2024/05/11 14:46:26 martin Exp $"); 36 37 #include "opt_adb.h" 38 39 #ifdef DEBUG 40 #ifndef ADB_DEBUG 41 #define ADB_DEBUG 42 #endif 43 #endif 44 45 /* #define PM_GRAB_SI 1 */ 46 47 #include <sys/types.h> 48 #include <sys/systm.h> 49 50 #include <machine/viareg.h> 51 #include <machine/param.h> 52 #include <machine/cpu.h> 53 #include <machine/adbsys.h> 54 55 #include <mac68k/mac68k/macrom.h> 56 #include <mac68k/dev/adbvar.h> 57 #include <mac68k/dev/pm_direct.h> 58 59 /* hardware dependent values */ 60 extern u_short ADBDelay; 61 extern u_int32_t HwCfgFlags3; 62 extern struct mac68k_machine_S mac68k_machine; 63 64 65 /* define the types of the Power Manager */ 66 #define PM_HW_UNKNOWN 0x00 /* don't know */ 67 #define PM_HW_PB1XX 0x01 /* PowerBook 1XX series */ 68 #define PM_HW_PB5XX 0x02 /* PowerBook Duo and 5XX series */ 69 70 /* useful macros */ 71 #define PM_SR() via_reg(VIA1, vSR) 72 #define PM_VIA_INTR_ENABLE() via_reg(VIA1, vIER) = 0x90 73 #define PM_VIA_INTR_DISABLE() via_reg(VIA1, vIER) = 0x10 74 #define PM_VIA_CLR_INTR() via_reg(VIA1, vIFR) = 0x90 75 #define PM_SET_STATE_ACKON() via_reg(VIA2, vBufB) |= 0x04 76 #define PM_SET_STATE_ACKOFF() via_reg(VIA2, vBufB) &= ~0x04 77 #define PM_IS_ON (0x02 == (via_reg(VIA2, vBufB) & 0x02)) 78 #define PM_IS_OFF (0x00 == (via_reg(VIA2, vBufB) & 0x02)) 79 80 /* 81 * Variables for internal use 82 */ 83 int pmHardware = PM_HW_UNKNOWN; 84 u_short pm_existent_ADB_devices = 0x0; /* each bit expresses the existent ADB device */ 85 u_int pm_LCD_brightness = 0x0; 86 u_int pm_LCD_contrast = 0x0; 87 u_int pm_counter = 0; /* clock count */ 88 89 /* these values shows that number of data returned after 'send' cmd is sent */ 90 char pm_send_cmd_type[] = { 91 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 92 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 93 0x01, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 94 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 95 0xff, 0x00, 0x02, 0x01, 0x01, 0xff, 0xff, 0xff, 96 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 97 0x04, 0x14, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 98 0x00, 0x00, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 99 0x01, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 100 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 101 0x01, 0x00, 0x02, 0x02, 0xff, 0x01, 0x03, 0x01, 102 0x00, 0x01, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 103 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 104 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 105 0x01, 0x01, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 106 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x04, 0x04, 107 0x04, 0xff, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 108 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 109 0x01, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 110 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 111 0x02, 0x02, 0x02, 0x04, 0xff, 0x00, 0xff, 0xff, 112 0x01, 0x01, 0x03, 0x02, 0xff, 0xff, 0xff, 0xff, 113 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 114 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 115 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 116 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 117 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 118 0x01, 0x01, 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 119 0xff, 0x04, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 120 0x03, 0xff, 0x00, 0xff, 0x00, 0xff, 0xff, 0x00, 121 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 122 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff 123 }; 124 125 /* these values shows that number of data returned after 'receive' cmd is sent */ 126 char pm_receive_cmd_type[] = { 127 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 128 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 129 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 130 0x02, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 131 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 132 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 133 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 134 0x05, 0x15, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 135 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 136 0x02, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 137 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 138 0x02, 0x00, 0x03, 0x03, 0xff, 0xff, 0xff, 0xff, 139 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 140 0x04, 0x04, 0x03, 0x09, 0xff, 0xff, 0xff, 0xff, 141 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 142 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0x01, 143 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 144 0x06, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 145 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 146 0x02, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 147 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 148 0x02, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 149 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 150 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 151 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 152 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 153 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 154 0x02, 0x02, 0xff, 0xff, 0x02, 0xff, 0xff, 0xff, 155 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 156 0xff, 0xff, 0x02, 0xff, 0xff, 0xff, 0xff, 0x00, 157 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 158 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 159 }; 160 161 162 /* 163 * Define the private functions 164 */ 165 166 /* for debugging */ 167 #ifdef ADB_DEBUG 168 void pm_printerr(const char *, int, int, char *); 169 #endif 170 171 int pm_wait_busy(int); 172 int pm_wait_free(int); 173 174 /* these functions are for the PB1XX series */ 175 int pm_receive_pm1(u_char *); 176 int pm_send_pm1(u_char, int); 177 int pm_pmgrop_pm1(PMData *); 178 void pm_intr_pm1(void *); 179 180 /* these functions are for the PB Duo series and the PB 5XX series */ 181 int pm_receive_pm2(u_char *); 182 int pm_send_pm2(u_char); 183 int pm_pmgrop_pm2(PMData *); 184 void pm_intr_pm2(void *); 185 186 /* this function is MRG-Based (for testing) */ 187 int pm_pmgrop_mrg(PMData *); 188 189 /* these functions are called from adb_direct.c */ 190 void pm_setup_adb(void); 191 void pm_check_adb_devices(int); 192 void pm_intr(void *); 193 int pm_adb_op(u_char *, void *, void *, int); 194 void pm_hw_setup(void); 195 196 /* these functions also use the variables of adb_direct.c */ 197 void pm_adb_get_TALK_result(PMData *); 198 void pm_adb_get_ADB_data(PMData *); 199 void pm_adb_poll_next_device_pm1(PMData *); 200 201 202 /* 203 * These variables are in adb_direct.c. 204 */ 205 extern u_char *adbBuffer; /* pointer to user data area */ 206 extern void *adbCompRout; /* pointer to the completion routine */ 207 extern void *adbCompData; /* pointer to the completion routine data */ 208 extern int adbWaiting; /* waiting for return data from the device */ 209 extern int adbWaitingCmd; /* ADB command we are waiting for */ 210 extern int adbStarting; /* doing ADB reinit, so do "polling" differently */ 211 212 #define ADB_MAX_MSG_LENGTH 16 213 #define ADB_MAX_HDR_LENGTH 8 214 struct adbCommand { 215 u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */ 216 u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */ 217 u_char *saveBuf; /* where to save result */ 218 u_char *compRout; /* completion routine pointer */ 219 u_char *compData; /* completion routine data pointer */ 220 u_int cmd; /* the original command for this data */ 221 u_int unsol; /* 1 if packet was unsolicited */ 222 u_int ack_only; /* 1 for no special processing */ 223 }; 224 extern void adb_pass_up(struct adbCommand *); 225 226 #ifdef ADB_DEBUG 227 /* 228 * This function dumps contents of the PMData 229 */ 230 void 231 pm_printerr(const char *ttl, int rval, int num, char *data) 232 { 233 int i; 234 235 printf("pm: %s:%04x %02x ", ttl, rval, num); 236 for (i = 0; i < num; i++) 237 printf("%02x ", data[i]); 238 printf("\n"); 239 } 240 #endif 241 242 243 244 /* 245 * Check the hardware type of the Power Manager 246 */ 247 void 248 pm_setup_adb(void) 249 { 250 switch (mac68k_machine.machineid) { 251 case MACH_MACPB140: 252 case MACH_MACPB145: 253 case MACH_MACPB160: 254 case MACH_MACPB165: 255 case MACH_MACPB165C: 256 case MACH_MACPB170: 257 case MACH_MACPB180: 258 case MACH_MACPB180C: 259 pmHardware = PM_HW_PB1XX; 260 break; 261 case MACH_MACPB150: 262 case MACH_MACPB210: 263 case MACH_MACPB230: 264 case MACH_MACPB250: 265 case MACH_MACPB270: 266 case MACH_MACPB280: 267 case MACH_MACPB280C: 268 case MACH_MACPB500: 269 case MACH_MACPB190: 270 case MACH_MACPB190CS: 271 pmHardware = PM_HW_PB5XX; 272 break; 273 default: 274 break; 275 } 276 } 277 278 279 /* 280 * Check the existent ADB devices 281 */ 282 void 283 pm_check_adb_devices(int id) 284 { 285 u_short ed = 0x1; 286 287 ed <<= id; 288 pm_existent_ADB_devices |= ed; 289 } 290 291 292 /* 293 * Wait until PM IC is busy 294 */ 295 int 296 pm_wait_busy(int xdelay) 297 { 298 while (PM_IS_ON) { 299 #ifdef PM_GRAB_SI 300 (void)intr_dispatch(0x70); /* grab any serial interrupts */ 301 #endif 302 if ((--xdelay) < 0) 303 return 1; /* timeout */ 304 } 305 return 0; 306 } 307 308 309 /* 310 * Wait until PM IC is free 311 */ 312 int 313 pm_wait_free(int xdelay) 314 { 315 while (PM_IS_OFF) { 316 #ifdef PM_GRAB_SI 317 (void)intr_dispatch(0x70); /* grab any serial interrupts */ 318 #endif 319 if ((--xdelay) < 0) 320 return 0; /* timeout */ 321 } 322 return 1; 323 } 324 325 326 327 /* 328 * Functions for the PB1XX series 329 */ 330 331 /* 332 * Receive data from PM for the PB1XX series 333 */ 334 int 335 pm_receive_pm1(u_char *data) 336 { 337 int rval = 0xffffcd34; 338 339 via_reg(VIA2, vDirA) = 0x00; 340 341 switch (1) { 342 default: 343 if (pm_wait_busy(0x40) != 0) 344 break; /* timeout */ 345 346 PM_SET_STATE_ACKOFF(); 347 *data = via_reg(VIA2, 0x200); 348 349 rval = 0xffffcd33; 350 if (pm_wait_free(0x40) == 0) 351 break; /* timeout */ 352 353 rval = 0x00; 354 break; 355 } 356 357 PM_SET_STATE_ACKON(); 358 via_reg(VIA2, vDirA) = 0x00; 359 360 return rval; 361 } 362 363 364 365 /* 366 * Send data to PM for the PB1XX series 367 */ 368 int 369 pm_send_pm1(u_char data, int timo) 370 { 371 int rval; 372 373 via_reg(VIA2, vDirA) = 0xff; 374 via_reg(VIA2, 0x200) = data; 375 376 PM_SET_STATE_ACKOFF(); 377 #if 0 378 if (pm_wait_busy(0x400) == 0) { 379 #else 380 if (pm_wait_busy(timo) == 0) { 381 #endif 382 PM_SET_STATE_ACKON(); 383 if (pm_wait_free(0x40) != 0) 384 rval = 0x0; 385 else 386 rval = 0xffffcd35; 387 } else { 388 rval = 0xffffcd36; 389 } 390 391 PM_SET_STATE_ACKON(); 392 via_reg(VIA2, vDirA) = 0x00; 393 394 return rval; 395 } 396 397 398 /* 399 * My PMgrOp routine for the PB1XX series 400 */ 401 int 402 pm_pmgrop_pm1(PMData *pmdata) 403 { 404 int i; 405 int s = 0x81815963; 406 u_char via1_vIER, via1_vDirA; 407 int rval = 0; 408 int num_pm_data = 0; 409 u_char pm_cmd; 410 u_char pm_data; 411 u_char *pm_buf; 412 413 /* disable all inetrrupts but PM */ 414 via1_vIER = via_reg(VIA1, vIER); 415 PM_VIA_INTR_DISABLE(); 416 417 via1_vDirA = via_reg(VIA1, vDirA); 418 419 switch (pmdata->command) { 420 default: 421 for (i = 0; i < 7; i++) { 422 via_reg(VIA2, vDirA) = 0x00; 423 424 /* wait until PM is free */ 425 if (pm_wait_free(ADBDelay) == 0) { /* timeout */ 426 via_reg(VIA2, vDirA) = 0x00; 427 /* restore formar value */ 428 via_reg(VIA1, vDirA) = via1_vDirA; 429 via_reg(VIA1, vIER) = via1_vIER; 430 return 0xffffcd38; 431 } 432 433 switch (mac68k_machine.machineid) { 434 case MACH_MACPB160: 435 case MACH_MACPB165: 436 case MACH_MACPB165C: 437 case MACH_MACPB170: 438 case MACH_MACPB180: 439 case MACH_MACPB180C: 440 { 441 int xdelay = ADBDelay * 16; 442 443 via_reg(VIA2, vDirA) = 0x00; 444 while ((via_reg(VIA2, 0x200) == 0x7f) && (xdelay >= 0)) 445 xdelay--; 446 447 if (xdelay < 0) { /* timeout */ 448 via_reg(VIA2, vDirA) = 0x00; 449 /* restore formar value */ 450 via_reg(VIA1, vIER) = via1_vIER; 451 return 0xffffcd38; 452 } 453 } 454 } /* end switch */ 455 456 s = splhigh(); 457 458 via1_vDirA = via_reg(VIA1, vDirA); 459 via_reg(VIA1, vDirA) &= 0x7f; 460 461 pm_cmd = (u_char)(pmdata->command & 0xff); 462 if ((rval = pm_send_pm1(pm_cmd, ADBDelay * 8)) == 0) 463 break; /* send command succeeded */ 464 465 via_reg(VIA1, vDirA) = via1_vDirA; 466 splx(s); 467 } /* end for */ 468 469 /* failed to send a command */ 470 if (i == 7) { 471 via_reg(VIA2, vDirA) = 0x00; 472 /* restore formar value */ 473 via_reg(VIA1, vDirA) = via1_vDirA; 474 via_reg(VIA1, vIER) = via1_vIER; 475 if (s != 0x81815963) 476 splx(s); 477 return 0xffffcd38; 478 } 479 480 /* send # of PM data */ 481 num_pm_data = pmdata->num_data; 482 if ((rval = pm_send_pm1((u_char)(num_pm_data & 0xff), ADBDelay * 8)) != 0) 483 break; /* timeout */ 484 485 /* send PM data */ 486 pm_buf = (u_char *)pmdata->s_buf; 487 for (i = 0; i < num_pm_data; i++) 488 if ((rval = pm_send_pm1(pm_buf[i], ADBDelay * 8)) != 0) 489 break; /* timeout */ 490 if ((i != num_pm_data) && (num_pm_data != 0)) 491 break; /* timeout */ 492 493 /* Will PM IC return data? */ 494 if ((pm_cmd & 0x08) == 0) { 495 rval = 0; 496 break; /* no returned data */ 497 } 498 499 rval = 0xffffcd37; 500 if (pm_wait_busy(ADBDelay) != 0) 501 break; /* timeout */ 502 503 /* receive PM command */ 504 if ((rval = pm_receive_pm1(&pm_data)) != 0) 505 break; 506 507 pmdata->command = pm_data; 508 509 /* receive number of PM data */ 510 if ((rval = pm_receive_pm1(&pm_data)) != 0) 511 break; /* timeout */ 512 num_pm_data = pm_data; 513 pmdata->num_data = num_pm_data; 514 515 /* receive PM data */ 516 pm_buf = (u_char *)pmdata->r_buf; 517 for (i = 0; i < num_pm_data; i++) { 518 if ((rval = pm_receive_pm1(&pm_data)) != 0) 519 break; /* timeout */ 520 pm_buf[i] = pm_data; 521 } 522 523 rval = 0; 524 } 525 526 via_reg(VIA2, vDirA) = 0x00; 527 528 /* restore formar value */ 529 via_reg(VIA1, vDirA) = via1_vDirA; 530 via_reg(VIA1, vIER) = via1_vIER; 531 if (s != 0x81815963) 532 splx(s); 533 534 return rval; 535 } 536 537 538 /* 539 * My PM interrupt routine for PB1XX series 540 */ 541 void 542 pm_intr_pm1(void *arg) 543 { 544 int s; 545 int rval; 546 PMData pmdata; 547 548 s = splhigh(); 549 550 PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */ 551 552 /* ask PM what happened */ 553 pmdata.command = 0x78; 554 pmdata.num_data = 0; 555 pmdata.data[0] = pmdata.data[1] = 0; 556 pmdata.s_buf = &pmdata.data[2]; 557 pmdata.r_buf = &pmdata.data[2]; 558 rval = pm_pmgrop_pm1(&pmdata); 559 if (rval != 0) { 560 #ifdef ADB_DEBUG 561 if (adb_debug) 562 printf("pm: PM is not ready. error code=%08x\n", rval); 563 #endif 564 splx(s); 565 return; 566 } 567 568 if ((pmdata.data[2] & 0x10) == 0x10) { 569 if ((pmdata.data[2] & 0x0f) == 0) { 570 /* ADB data that were requested by TALK command */ 571 pm_adb_get_TALK_result(&pmdata); 572 } else if ((pmdata.data[2] & 0x08) == 0x8) { 573 /* PM is requesting to poll */ 574 pm_adb_poll_next_device_pm1(&pmdata); 575 } else if ((pmdata.data[2] & 0x04) == 0x4) { 576 /* ADB device event */ 577 pm_adb_get_ADB_data(&pmdata); 578 } 579 } else { 580 #ifdef ADB_DEBUG 581 if (adb_debug) 582 pm_printerr("driver does not supported this event.", 583 rval, pmdata.num_data, pmdata.data); 584 #endif 585 } 586 587 splx(s); 588 } 589 590 591 592 /* 593 * Functions for the PB Duo series and the PB 5XX series 594 */ 595 596 /* 597 * Receive data from PM for the PB Duo series and the PB 5XX series 598 */ 599 int 600 pm_receive_pm2(u_char *data) 601 { 602 int rval; 603 604 rval = 0xffffcd34; 605 606 switch (1) { 607 default: 608 /* set VIA SR to input mode */ 609 via_reg(VIA1, vACR) |= 0x0c; 610 via_reg(VIA1, vACR) &= ~0x10; 611 PM_SR(); 612 613 PM_SET_STATE_ACKOFF(); 614 if (pm_wait_busy((int)ADBDelay*32) != 0) 615 break; /* timeout */ 616 617 PM_SET_STATE_ACKON(); 618 rval = 0xffffcd33; 619 if (pm_wait_free((int)ADBDelay*32) == 0) 620 break; /* timeout */ 621 622 *data = PM_SR(); 623 rval = 0; 624 625 break; 626 } 627 628 PM_SET_STATE_ACKON(); 629 via_reg(VIA1, vACR) |= 0x1c; 630 631 return rval; 632 } 633 634 635 636 /* 637 * Send data to PM for the PB Duo series and the PB 5XX series 638 */ 639 int 640 pm_send_pm2(u_char data) 641 { 642 int rval; 643 644 via_reg(VIA1, vACR) |= 0x1c; 645 PM_SR() = data; 646 647 PM_SET_STATE_ACKOFF(); 648 if (pm_wait_busy((int)ADBDelay*32) == 0) { 649 PM_SET_STATE_ACKON(); 650 if (pm_wait_free((int)ADBDelay*32) != 0) 651 rval = 0; 652 else 653 rval = 0xffffcd35; 654 } else { 655 rval = 0xffffcd36; 656 } 657 658 PM_SET_STATE_ACKON(); 659 via_reg(VIA1, vACR) |= 0x1c; 660 661 return rval; 662 } 663 664 665 666 /* 667 * My PMgrOp routine for the PB Duo series and the PB 5XX series 668 */ 669 int 670 pm_pmgrop_pm2(PMData *pmdata) 671 { 672 int i; 673 int s; 674 u_char via1_vIER; 675 int rval = 0; 676 int num_pm_data = 0; 677 u_char pm_cmd; 678 short pm_num_rx_data; 679 u_char pm_data; 680 u_char *pm_buf; 681 682 s = splhigh(); 683 684 /* disable all inetrrupts but PM */ 685 via1_vIER = 0x10; 686 via1_vIER &= via_reg(VIA1, vIER); 687 via_reg(VIA1, vIER) = via1_vIER; 688 if (via1_vIER != 0x0) 689 via1_vIER |= 0x80; 690 691 switch (pmdata->command) { 692 default: 693 /* wait until PM is free */ 694 pm_cmd = (u_char)(pmdata->command & 0xff); 695 rval = 0xcd38; 696 if (pm_wait_free(ADBDelay * 4) == 0) 697 break; /* timeout */ 698 699 if (HwCfgFlags3 & 0x00200000) { 700 /* PB 160, PB 165(c), PB 180(c)? */ 701 int xdelay = ADBDelay * 16; 702 703 via_reg(VIA2, vDirA) = 0x00; 704 while ((via_reg(VIA2, 0x200) == 0x07) && 705 (xdelay >= 0)) 706 xdelay--; 707 708 if (xdelay < 0) { 709 rval = 0xffffcd38; 710 break; /* timeout */ 711 } 712 } 713 714 /* send PM command */ 715 if ((rval = pm_send_pm2((u_char)(pm_cmd & 0xff)))) 716 break; /* timeout */ 717 718 /* send number of PM data */ 719 num_pm_data = pmdata->num_data; 720 if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */ 721 if (pm_send_cmd_type[pm_cmd] < 0) { 722 if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0) 723 break; /* timeout */ 724 pmdata->command = 0; 725 } 726 } else { /* PB 1XX series ? */ 727 if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0) 728 break; /* timeout */ 729 } 730 /* send PM data */ 731 pm_buf = (u_char *)pmdata->s_buf; 732 for (i = 0 ; i < num_pm_data; i++) 733 if ((rval = pm_send_pm2(pm_buf[i])) != 0) 734 break; /* timeout */ 735 if (i != num_pm_data) 736 break; /* timeout */ 737 738 739 /* check if PM will send me data */ 740 pm_num_rx_data = pm_receive_cmd_type[pm_cmd]; 741 pmdata->num_data = pm_num_rx_data; 742 if (pm_num_rx_data == 0) { 743 rval = 0; 744 break; /* no return data */ 745 } 746 747 /* receive PM command */ 748 pm_data = pmdata->command; 749 if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */ 750 pm_num_rx_data--; 751 if (pm_num_rx_data == 0) 752 if ((rval = pm_receive_pm2(&pm_data)) != 0) { 753 rval = 0xffffcd37; 754 break; 755 } 756 pmdata->command = pm_data; 757 } else { /* PB 1XX series ? */ 758 if ((rval = pm_receive_pm2(&pm_data)) != 0) { 759 rval = 0xffffcd37; 760 break; 761 } 762 pmdata->command = pm_data; 763 } 764 765 /* receive number of PM data */ 766 if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */ 767 if (pm_num_rx_data < 0) { 768 if ((rval = pm_receive_pm2(&pm_data)) != 0) 769 break; /* timeout */ 770 num_pm_data = pm_data; 771 } else 772 num_pm_data = pm_num_rx_data; 773 pmdata->num_data = num_pm_data; 774 } else { /* PB 1XX serias ? */ 775 if ((rval = pm_receive_pm2(&pm_data)) != 0) 776 break; /* timeout */ 777 num_pm_data = pm_data; 778 pmdata->num_data = num_pm_data; 779 } 780 781 /* receive PM data */ 782 pm_buf = (u_char *)pmdata->r_buf; 783 for (i = 0; i < num_pm_data; i++) { 784 if ((rval = pm_receive_pm2(&pm_data)) != 0) 785 break; /* timeout */ 786 pm_buf[i] = pm_data; 787 } 788 789 rval = 0; 790 } 791 792 /* restore former value */ 793 via_reg(VIA1, vIER) = via1_vIER; 794 splx(s); 795 796 return rval; 797 } 798 799 800 /* 801 * My PM interrupt routine for the PB Duo series and the PB 5XX series 802 */ 803 void 804 pm_intr_pm2(void *arg) 805 { 806 int s; 807 int rval; 808 PMData pmdata; 809 810 s = splhigh(); 811 812 PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */ 813 /* ask PM what happened */ 814 pmdata.command = 0x78; 815 pmdata.num_data = 0; 816 pmdata.s_buf = &pmdata.data[2]; 817 pmdata.r_buf = &pmdata.data[2]; 818 rval = pm_pmgrop_pm2(&pmdata); 819 if (rval != 0) { 820 #ifdef ADB_DEBUG 821 if (adb_debug) 822 printf("pm: PM is not ready. error code: %08x\n", rval); 823 #endif 824 splx(s); 825 return; 826 } 827 828 switch ((u_int)(pmdata.data[2] & 0xff)) { 829 case 0x00: /* 1 sec interrupt? */ 830 break; 831 case 0x80: /* 1 sec interrupt? */ 832 pm_counter++; 833 break; 834 case 0x08: /* Brightness/Contrast button on LCD panel */ 835 /* get brightness and contrast of the LCD */ 836 pm_LCD_brightness = (u_int)pmdata.data[3] & 0xff; 837 pm_LCD_contrast = (u_int)pmdata.data[4] & 0xff; 838 /* 839 pm_printerr("#08", rval, pmdata.num_data, pmdata.data); 840 pmdata.command = 0x33; 841 pmdata.num_data = 1; 842 pmdata.s_buf = pmdata.data; 843 pmdata.r_buf = pmdata.data; 844 pmdata.data[0] = pm_LCD_contrast; 845 rval = pm_pmgrop_pm2(&pmdata); 846 pm_printerr("#33", rval, pmdata.num_data, pmdata.data); 847 */ 848 /* this is an experimental code */ 849 pmdata.command = 0x41; 850 pmdata.num_data = 1; 851 pmdata.s_buf = pmdata.data; 852 pmdata.r_buf = pmdata.data; 853 pm_LCD_brightness = 0x7f - pm_LCD_brightness / 2; 854 if (pm_LCD_brightness < 0x25) 855 pm_LCD_brightness = 0x25; 856 if (pm_LCD_brightness > 0x5a) 857 pm_LCD_brightness = 0x7f; 858 pmdata.data[0] = pm_LCD_brightness; 859 rval = pm_pmgrop_pm2(&pmdata); 860 break; 861 case 0x10: /* ADB data that were requested by TALK command */ 862 case 0x14: 863 pm_adb_get_TALK_result(&pmdata); 864 break; 865 case 0x16: /* ADB device event */ 866 case 0x18: 867 case 0x1e: 868 pm_adb_get_ADB_data(&pmdata); 869 break; 870 default: 871 #ifdef ADB_DEBUG 872 if (adb_debug) 873 pm_printerr("driver does not supported this event.", 874 pmdata.data[2], pmdata.num_data, 875 pmdata.data); 876 #endif 877 break; 878 } 879 880 splx(s); 881 } 882 883 884 /* 885 * MRG-based PMgrOp routine 886 */ 887 int 888 pm_pmgrop_mrg(PMData *pmdata) 889 { 890 u_int32_t rval=0; 891 892 __asm volatile( 893 " movl %1,%%a0 \n" 894 " .word 0xa085 \n" 895 " movl %%d0,%0" 896 : "=g" (rval) 897 : "g" (pmdata) 898 : "a0","d0"); 899 900 return rval; 901 } 902 903 904 /* 905 * My PMgrOp routine 906 */ 907 int 908 pmgrop(PMData *pmdata) 909 { 910 switch (pmHardware) { 911 case PM_HW_PB1XX: 912 return (pm_pmgrop_pm1(pmdata)); 913 break; 914 case PM_HW_PB5XX: 915 return (pm_pmgrop_pm2(pmdata)); 916 break; 917 default: 918 /* return (pmgrop_mrg(pmdata)); */ 919 return 1; 920 } 921 } 922 923 924 /* 925 * My PM interrupt routine 926 */ 927 void 928 pm_intr(void *arg) 929 { 930 switch (pmHardware) { 931 case PM_HW_PB1XX: 932 pm_intr_pm1(arg); 933 break; 934 case PM_HW_PB5XX: 935 pm_intr_pm2(arg); 936 break; 937 default: 938 break; 939 } 940 } 941 942 943 void 944 pm_hw_setup(void) 945 { 946 switch (pmHardware) { 947 case PM_HW_PB1XX: 948 via1_register_irq(4, pm_intr_pm1, (void *)0); 949 PM_VIA_CLR_INTR(); 950 break; 951 case PM_HW_PB5XX: 952 via1_register_irq(4, pm_intr_pm2, (void *)0); 953 PM_VIA_CLR_INTR(); 954 break; 955 default: 956 break; 957 } 958 } 959 960 961 /* 962 * Synchronous ADBOp routine for the Power Manager 963 */ 964 int 965 pm_adb_op(u_char *buffer, void *compRout, void *data, int command) 966 { 967 int i; 968 int s; 969 int rval; 970 int xdelay; 971 PMData pmdata; 972 struct adbCommand packet; 973 974 if (adbWaiting == 1) 975 return 1; 976 977 s = splhigh(); 978 via_reg(VIA1, vIER) = 0x10; 979 980 adbBuffer = buffer; 981 adbCompRout = compRout; 982 adbCompData = data; 983 984 pmdata.command = 0x20; 985 pmdata.s_buf = pmdata.data; 986 pmdata.r_buf = pmdata.data; 987 988 if ((command & 0xc) == 0x8) { /* if the command is LISTEN, add number of ADB data to number of PM data */ 989 if (buffer != (u_char *)0) 990 pmdata.num_data = buffer[0] + 3; 991 } else { 992 pmdata.num_data = 3; 993 } 994 995 pmdata.data[0] = (u_char)(command & 0xff); 996 pmdata.data[1] = 0; 997 if ((command & 0xc) == 0x8) { /* if the command is LISTEN, copy ADB data to PM buffer */ 998 if ((buffer != (u_char *)0) && (buffer[0] <= 24)) { 999 pmdata.data[2] = buffer[0]; /* number of data */ 1000 for (i = 0; i < buffer[0]; i++) 1001 pmdata.data[3 + i] = buffer[1 + i]; 1002 } else 1003 pmdata.data[2] = 0; 1004 } else 1005 pmdata.data[2] = 0; 1006 1007 if ((command & 0xc) != 0xc) { /* if the command is not TALK */ 1008 /* set up stuff fNULLor adb_pass_up */ 1009 packet.data[0] = 1 + pmdata.data[2]; 1010 packet.data[1] = command; 1011 for (i = 0; i < pmdata.data[2]; i++) 1012 packet.data[i+2] = pmdata.data[i+3]; 1013 packet.saveBuf = adbBuffer; 1014 packet.compRout = adbCompRout; 1015 packet.compData = adbCompData; 1016 packet.cmd = command; 1017 packet.unsol = 0; 1018 packet.ack_only = 1; 1019 adb_polling = 1; 1020 adb_pass_up(&packet); 1021 adb_polling = 0; 1022 } 1023 1024 rval = pmgrop(&pmdata); 1025 if (rval != 0) { 1026 splx(s); 1027 return 1; 1028 } 1029 1030 adbWaiting = 1; 1031 adbWaitingCmd = command; 1032 1033 PM_VIA_INTR_ENABLE(); 1034 1035 /* wait until the PM interrupt has occurred */ 1036 xdelay = 0x80000; 1037 while (adbWaiting == 1) { 1038 switch (mac68k_machine.machineid) { 1039 case MACH_MACPB150: 1040 case MACH_MACPB210: 1041 case MACH_MACPB230: /* daishi tested with Duo230 */ 1042 case MACH_MACPB250: 1043 case MACH_MACPB270: 1044 case MACH_MACPB280: 1045 case MACH_MACPB280C: 1046 case MACH_MACPB190: 1047 case MACH_MACPB190CS: 1048 pm_intr((void *)0); 1049 break; 1050 default: 1051 if ((via_reg(VIA1, vIFR) & 0x10) == 0x10) 1052 pm_intr((void *)0); 1053 break; 1054 } 1055 #ifdef PM_GRAB_SI 1056 (void)intr_dispatch(0x70); /* grab any serial interrupts */ 1057 #endif 1058 if ((--xdelay) < 0) { 1059 splx(s); 1060 return 1; 1061 } 1062 } 1063 1064 /* this command enables the interrupt by operating ADB devices */ 1065 if (HwCfgFlags3 & 0x00020000) { /* PB Duo series, PB 5XX series */ 1066 pmdata.command = 0x20; 1067 pmdata.num_data = 4; 1068 pmdata.s_buf = pmdata.data; 1069 pmdata.r_buf = pmdata.data; 1070 pmdata.data[0] = 0x00; 1071 pmdata.data[1] = 0x86; /* magic spell for awaking the PM */ 1072 pmdata.data[2] = 0x00; 1073 pmdata.data[3] = 0x0c; /* each bit may express the existent ADB device */ 1074 } else { /* PB 1XX series */ 1075 pmdata.command = 0x20; 1076 pmdata.num_data = 3; 1077 pmdata.s_buf = pmdata.data; 1078 pmdata.r_buf = pmdata.data; 1079 pmdata.data[0] = (u_char)(command & 0xf0) | 0xc; 1080 pmdata.data[1] = 0x04; 1081 pmdata.data[2] = 0x00; 1082 } 1083 rval = pmgrop(&pmdata); 1084 1085 splx(s); 1086 return rval; 1087 } 1088 1089 1090 void 1091 pm_adb_get_TALK_result(PMData *pmdata) 1092 { 1093 int i; 1094 struct adbCommand packet; 1095 1096 /* set up data for adb_pass_up */ 1097 packet.data[0] = pmdata->num_data-1; 1098 packet.data[1] = pmdata->data[3]; 1099 for (i = 0; i <packet.data[0]-1; i++) 1100 packet.data[i+2] = pmdata->data[i+4]; 1101 1102 packet.saveBuf = adbBuffer; 1103 packet.compRout = adbCompRout; 1104 packet.compData = adbCompData; 1105 packet.unsol = 0; 1106 packet.ack_only = 0; 1107 adb_polling = 1; 1108 adb_pass_up(&packet); 1109 adb_polling = 0; 1110 1111 adbWaiting = 0; 1112 adbBuffer = (long)0; 1113 adbCompRout = (long)0; 1114 adbCompData = (long)0; 1115 } 1116 1117 1118 void 1119 pm_adb_get_ADB_data(PMData *pmdata) 1120 { 1121 int i; 1122 struct adbCommand packet; 1123 1124 /* set up data for adb_pass_up */ 1125 packet.data[0] = pmdata->num_data-1; /* number of raw data */ 1126 packet.data[1] = pmdata->data[3]; /* ADB command */ 1127 for (i = 0; i <packet.data[0]-1; i++) 1128 packet.data[i+2] = pmdata->data[i+4]; 1129 packet.unsol = 1; 1130 packet.ack_only = 0; 1131 adb_pass_up(&packet); 1132 } 1133 1134 1135 void 1136 pm_adb_poll_next_device_pm1(PMData *pmdata) 1137 { 1138 int i; 1139 int ndid; 1140 u_short bendid = 0x1; 1141 PMData tmp_pmdata; 1142 1143 /* find another existent ADB device to poll */ 1144 for (i = 1; i < 16; i++) { 1145 ndid = (ADB_CMDADDR(pmdata->data[3]) + i) & 0xf; 1146 bendid <<= ndid; 1147 if ((pm_existent_ADB_devices & bendid) != 0) 1148 break; 1149 } 1150 1151 /* poll the other device */ 1152 tmp_pmdata.command = 0x20; 1153 tmp_pmdata.num_data = 3; 1154 tmp_pmdata.s_buf = tmp_pmdata.data; 1155 tmp_pmdata.r_buf = tmp_pmdata.data; 1156 tmp_pmdata.data[0] = (u_char)(ndid << 4) | 0xc; 1157 tmp_pmdata.data[1] = 0x04; /* magic spell for awaking the PM */ 1158 tmp_pmdata.data[2] = 0x00; 1159 pmgrop(&tmp_pmdata); 1160 } 1161
Indexes created Thu Oct 02 10:09:58 GMT 2025