vmparam.h revision 1.5 1 /*
2 * Copyright (c) 1988 University of Utah.
3 * Copyright (c) 1982, 1990 The Regents of the University of California.
4 * All rights reserved.
5 *
6 * This code is derived from software contributed to Berkeley by
7 * the Systems Programming Group of the University of Utah Computer
8 * Science Department.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the University of
21 * California, Berkeley and its contributors.
22 * 4. Neither the name of the University nor the names of its contributors
23 * may be used to endorse or promote products derived from this software
24 * without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * SUCH DAMAGE.
37 */
38 /*-
39 * Copyright (C) 1993 Allen K. Briggs, Chris P. Caputo,
40 * Michael L. Finch, Bradley A. Grantham, and
41 * Lawrence A. Kesteloot
42 * All rights reserved.
43 *
44 * Redistribution and use in source and binary forms, with or without
45 * modification, are permitted provided that the following conditions
46 * are met:
47 * 1. Redistributions of source code must retain the above copyright
48 * notice, this list of conditions and the following disclaimer.
49 * 2. Redistributions in binary form must reproduce the above copyright
50 * notice, this list of conditions and the following disclaimer in the
51 * documentation and/or other materials provided with the distribution.
52 * 3. All advertising materials mentioning features or use of this software
53 * must display the following acknowledgement:
54 * This product includes software developed by the Alice Group.
55 * 4. The names of the Alice Group or any of its members may not be used
56 * to endorse or promote products derived from this software without
57 * specific prior written permission.
58 *
59 * THIS SOFTWARE IS PROVIDED BY THE ALICE GROUP ``AS IS'' AND ANY EXPRESS OR
60 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
61 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
62 * IN NO EVENT SHALL THE ALICE GROUP BE LIABLE FOR ANY DIRECT, INDIRECT,
63 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
64 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
65 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
66 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
67 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
68 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
69 *
70 */
71 /*
72 * from: Utah $Hdr: vmparam.h 1.16 91/01/18$
73 *
74 * from: @(#)vmparam.h 7.3 (Berkeley) 5/7/91
75 * $Id: vmparam.h,v 1.5 1994/06/26 13:21:49 briggs Exp $
76 */
77
78 /*
79 * Machine dependent constants for HP300
80 ALICE
81 BG -- Sat May 23 23:45:21 EDT 1992
82 You'd like to think that, wouldn't you? Well it's NOT an hp300!
83 It's a mac68k! And therefore I am changing it.
84 */
85
86 /*
87 * USRTEXT is the start of the user text/data space, while USRSTACK
88 * is the top (end) of the user stack. LOWPAGES and HIGHPAGES are
89 * the number of pages from the beginning of the P0 region to the
90 * beginning of the text and from the beginning of the P1 region to the
91 * beginning of the stack respectively.
92 *
93 */
94 #define USRTEXT 8192
95 #define USRSTACK (-HIGHPAGES*NBPG) /* Start of user stack */
96 /* -1048576 */
97 #define BTOPUSRSTACK (0x100000-HIGHPAGES) /* btop(USRSTACK) */
98 #define P1PAGES 0x100000
99 #define LOWPAGES 0
100 #define HIGHPAGES 3 /* UPAGES. */
101
102 /*
103 * Virtual memory related constants, all in bytes
104 */
105 #ifndef MAXTSIZ
106 #define MAXTSIZ (6*1024*1024) /* max text size */
107 #endif
108 #ifndef DFLDSIZ
109 #define DFLDSIZ (8*1024*1024) /* initial data size limit */
110 #endif
111 #ifndef MAXDSIZ
112 #define MAXDSIZ (16*1024*1024) /* max data size */
113 #endif
114 #ifndef DFLSSIZ
115 #define DFLSSIZ (512*1024) /* initial stack size limit */
116 #endif
117 #ifndef MAXSSIZ
118 #define MAXSSIZ MAXDSIZ /* max stack size */
119 #endif
120
121 /*
122 * Default sizes of swap allocation chunks (see dmap.h).
123 * The actual values may be changed in vminit() based on MAXDSIZ.
124 * With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024.
125 * DMMIN should be at least ctod(1) so that vtod() works.
126 * vminit() insures this.
127 */
128 #define DMMIN 32 /* smallest swap allocation */
129 #define DMMAX 4096 /* largest potential swap allocation */
130
131 /*
132 * Sizes of the system and user portions of the system page table.
133 */
134 /* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */
135 #define SYSPTSIZE (2 * NPTEPG) /* 8mb */
136 #define USRPTSIZE (2 * NPTEPG) /* 8mb */
137
138 /*
139 * PTEs for mapping user space into the kernel for phyio operations.
140 * One page is enough to handle 4Mb of simultaneous raw IO operations.
141 */
142 #ifndef USRIOSIZE
143 #define USRIOSIZE (1 * NPTEPG) /* 4mb */
144 #endif
145
146 /*
147 * PTEs for system V style shared memory.
148 * This is basically slop for kmempt which we actually allocate (malloc) from.
149 */
150 #ifndef SHMMAXPGS
151 #define SHMMAXPGS 1024 /* 4mb */
152 #endif
153
154 /*
155 * Boundary at which to place first MAPMEM segment if not explicitly
156 * specified. Should be a power of two. This allows some slop for
157 * the data segment to grow underneath the first mapped segment.
158 */
159 #define MMSEG 0x200000
160
161 /*
162 * The size of the clock loop.
163 */
164 #define LOOPPAGES (maxfree - firstfree)
165
166 /*
167 * The time for a process to be blocked before being very swappable.
168 * This is a number of seconds which the system takes as being a non-trivial
169 * amount of real time. You probably shouldn't change this;
170 * it is used in subtle ways (fractions and multiples of it are, that is, like
171 * half of a ``long time'', almost a long time, etc.)
172 * It is related to human patience and other factors which don't really
173 * change over time.
174 */
175 #define MAXSLP 20
176
177 /*
178 * A swapped in process is given a small amount of core without being bothered
179 * by the page replacement algorithm. Basically this says that if you are
180 * swapped in you deserve some resources. We protect the last SAFERSS
181 * pages against paging and will just swap you out rather than paging you.
182 * Note that each process has at least UPAGES+CLSIZE pages which are not
183 * paged anyways (this is currently 8+2=10 pages or 5k bytes), so this
184 * number just means a swapped in process is given around 25k bytes.
185 * Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81),
186 * so we loan each swapped in process memory worth 100$, or just admit
187 * that we don't consider it worthwhile and swap it out to disk which costs
188 * $30/mb or about $0.75.
189 */
190 #define SAFERSS 4 /* nominal ``small'' resident set size
191 protected against replacement */
192
193 /*
194 * DISKRPM is used to estimate the number of paging i/o operations
195 * which one can expect from a single disk controller.
196 */
197 #define DISKRPM 3600
198
199 /*
200 * Klustering constants. Klustering is the gathering
201 * of pages together for pagein/pageout, while clustering
202 * is the treatment of hardware page size as though it were
203 * larger than it really is.
204 *
205 * KLMAX gives maximum cluster size in CLSIZE page (cluster-page)
206 * units. Note that ctod(KLMAX*CLSIZE) must be <= DMMIN in dmap.h.
207 * ctob(KLMAX) should also be less than MAXPHYS (in vm_swp.c)
208 * unless you like "big push" panics.
209 */
210
211 #define KLMAX (4/CLSIZE)
212 #define KLSEQL (2/CLSIZE) /* in klust if vadvise(VA_SEQL) */
213 #define KLIN (4/CLSIZE) /* default data/stack in klust */
214 #define KLTXT (4/CLSIZE) /* default text in klust */
215 #define KLOUT (4/CLSIZE)
216
217 /*
218 * KLSDIST is the advance or retard of the fifo reclaim for sequential
219 * processes data space.
220 */
221 #define KLSDIST 3 /* klusters advance/retard for seq. fifo */
222
223 /*
224 * Paging thresholds (see vm_sched.c).
225 * Strategy of 1/19/85:
226 * lotsfree is 512k bytes, but at most 1/4 of memory
227 * desfree is 200k bytes, but at most 1/8 of memory
228 * minfree is 64k bytes, but at most 1/2 of desfree
229 */
230 /* ALICE 05/23/92 BG -- I think we had better look these over carefully. */
231 #define LOTSFREE (512 * 1024)
232 #define LOTSFREEFRACT 4
233 #define DESFREE (200 * 1024)
234 #define DESFREEFRACT 8
235
236 /*
237 * There are two clock hands, initially separated by HANDSPREAD bytes
238 * (but at most all of user memory). The amount of time to reclaim
239 * a page once the pageout process examines it increases with this
240 * distance and decreases as the scan rate rises.
241 */
242 #define HANDSPREAD (2 * 1024 * 1024)
243
244 /*
245 * The number of times per second to recompute the desired paging rate
246 * and poke the pagedaemon.
247 */
248 #define RATETOSCHEDPAGING 4
249
250 /*
251 * Believed threshold (in megabytes) for which interleaved
252 * swapping area is desirable.
253 */
254 /* ALICE 05/23/92 BG -- This should be higher. How high, I don't know. */
255 #define LOTSOFMEM 2
256
257 #define mapin(pte, v, pfnum, prot) \
258 (*(u_int *)(pte) = ((pfnum) << PGSHIFT) | (prot), TBIS((caddr_t)(v)))
259
260 /*
261 * Mach derived constants
262 */
263
264 /* user/kernel map constants */
265 #define VM_MIN_ADDRESS ((vm_offset_t)0)
266 #define VM_MAXUSER_ADDRESS ((vm_offset_t)0xFFFFD000)
267 /* Note that this goes as high as USRSTACK. If USRSTACK goes higher, */
268 /* this constant really should, too. */
269 #define VM_MAX_ADDRESS ((vm_offset_t)0xFFFFD000)
270 #define VM_MIN_KERNEL_ADDRESS ((vm_offset_t)0)
271 #define VM_MAX_KERNEL_ADDRESS ((vm_offset_t)0xFFFFF000)
272
273 /* virtual sizes (bytes) for various kernel submaps */
274 #define VM_MBUF_SIZE (NMBCLUSTERS*MCLBYTES)
275 #define VM_KMEM_SIZE (NKMEMCLUSTERS*CLBYTES)
276 #define VM_PHYS_SIZE (USRIOSIZE*CLBYTES)
277
278 /* # of kernel PT pages (initial only, can grow dynamically) */
279 #define VM_KERNEL_PT_PAGES ((vm_size_t)2) /* XXX: SYSPTSIZE */
280
281 /* pcb base */
282 #define pcbb(p) ((u_int)(p)->p_addr)
283