if_mc_obio.c revision 1.16
1 /* $NetBSD: if_mc_obio.c,v 1.16 2006/12/12 11:46:33 martin Exp $ */ 2 3 /*- 4 * Copyright (c) 1997 David Huang <khym (at) azeotrope.org> 5 * All rights reserved. 6 * 7 * Portions of this code are based on code by Denton Gentry <denny1 (at) home.com> 8 * and Yanagisawa Takeshi <yanagisw (at) aa.ap.titech.ac.jp>. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 * 29 */ 30 31 /* 32 * Bus attachment and DMA routines for the mc driver (Centris/Quadra 33 * 660av and Quadra 840av onboard ethernet, based on the AMD Am79C940 34 * MACE ethernet chip). Also uses the PSC (Peripheral Subsystem 35 * Controller) for DMA to and from the MACE. 36 */ 37 38 #include <sys/cdefs.h> 39 __KERNEL_RCSID(0, "$NetBSD: if_mc_obio.c,v 1.16 2006/12/12 11:46:33 martin Exp $"); 40 41 #include "opt_ddb.h" 42 43 #include <sys/param.h> 44 #include <sys/device.h> 45 #include <sys/malloc.h> 46 #include <sys/socket.h> 47 #include <sys/systm.h> 48 49 #include <net/if.h> 50 #include <net/if_ether.h> 51 52 #include <uvm/uvm_extern.h> 53 54 #include <machine/bus.h> 55 #include <machine/psc.h> 56 57 #include <mac68k/obio/obiovar.h> 58 #include <mac68k/dev/if_mcreg.h> 59 #include <mac68k/dev/if_mcvar.h> 60 61 #define MACE_REG_BASE 0x50F1C000 62 #define MACE_PROM_BASE 0x50F08000 63 64 hide int mc_obio_match(struct device *, struct cfdata *, void *); 65 hide void mc_obio_attach(struct device *, struct device *, void *); 66 hide void mc_obio_init(struct mc_softc *); 67 hide void mc_obio_put(struct mc_softc *, u_int); 68 hide int mc_dmaintr(void *); 69 hide void mc_reset_rxdma(struct mc_softc *); 70 hide void mc_reset_rxdma_set(struct mc_softc *, int); 71 hide void mc_reset_txdma(struct mc_softc *); 72 hide int mc_obio_getaddr(struct mc_softc *, u_int8_t *); 73 74 CFATTACH_DECL(mc_obio, sizeof(struct mc_softc), 75 mc_obio_match, mc_obio_attach, NULL, NULL); 76 77 hide int 78 mc_obio_match(struct device *parent, struct cfdata *cf, void *aux) 79 { 80 struct obio_attach_args *oa = aux; 81 bus_space_handle_t bsh; 82 int found = 0; 83 84 if (current_mac_model->class != MACH_CLASSAV) 85 return 0; 86 87 if (bus_space_map(oa->oa_tag, MACE_REG_BASE, MC_REGSIZE, 0, &bsh)) 88 return 0; 89 90 /* 91 * Make sure the MACE's I/O space is readable, and if it is, 92 * try to read the CHIPID register. A MACE will always have 93 * 0x?940, where the ? depends on the chip version. 94 */ 95 if (mac68k_bus_space_probe(oa->oa_tag, bsh, 0, 1)) { 96 if ((bus_space_read_1( 97 oa->oa_tag, bsh, MACE_REG(MACE_CHIPIDL)) == 0x40) && 98 ((bus_space_read_1( 99 oa->oa_tag, bsh, MACE_REG(MACE_CHIPIDH)) & 0xf) == 9)) 100 found = 1; 101 } 102 103 bus_space_unmap(oa->oa_tag, bsh, MC_REGSIZE); 104 105 return found; 106 } 107 108 hide void 109 mc_obio_attach(struct device *parent, struct device *self, void *aux) 110 { 111 struct obio_attach_args *oa = (struct obio_attach_args *)aux; 112 struct mc_softc *sc = (void *)self; 113 u_int8_t myaddr[ETHER_ADDR_LEN]; 114 int rsegs; 115 116 sc->sc_regt = oa->oa_tag; 117 sc->sc_biucc = XMTSP_64; 118 sc->sc_fifocc = XMTFW_16 | RCVFW_64 | XMTFWU | RCVFWU | 119 XMTBRST | RCVBRST; 120 sc->sc_plscc = PORTSEL_AUI; 121 122 if (bus_space_map(sc->sc_regt, MACE_REG_BASE, MC_REGSIZE, 0, 123 &sc->sc_regh)) { 124 printf(": failed to map space for MACE regs.\n"); 125 return; 126 } 127 128 if (mc_obio_getaddr(sc, myaddr)) { 129 printf(": failed to get MAC address.\n"); 130 return; 131 } 132 133 /* allocate memory for transmit and receive DMA buffers */ 134 sc->sc_dmat = oa->oa_dmat; 135 if (bus_dmamem_alloc(sc->sc_dmat, 2 * 0x800, 0, 0, &sc->sc_dmasegs_tx, 136 1, &rsegs, BUS_DMA_NOWAIT) != 0) { 137 printf(": failed to allocate TX DMA buffers.\n"); 138 return; 139 } 140 141 if (bus_dmamem_map(sc->sc_dmat, &sc->sc_dmasegs_tx, rsegs, 2 * 0x800, 142 &sc->sc_txbuf, BUS_DMA_NOWAIT | BUS_DMA_COHERENT) != 0) { 143 printf(": failed to map TX DMA buffers.\n"); 144 return; 145 } 146 147 if (bus_dmamem_alloc(sc->sc_dmat, MC_RXDMABUFS * 0x800, 0, 0, 148 &sc->sc_dmasegs_rx, 1, &rsegs, BUS_DMA_NOWAIT) != 0) { 149 printf(": failed to allocate RX DMA buffers.\n"); 150 return; 151 } 152 153 if (bus_dmamem_map(sc->sc_dmat, &sc->sc_dmasegs_rx, rsegs, 154 MC_RXDMABUFS * 0x800, &sc->sc_rxbuf, 155 BUS_DMA_NOWAIT | BUS_DMA_COHERENT) != 0) { 156 printf(": failed to map RX DMA buffers.\n"); 157 return; 158 } 159 160 if (bus_dmamap_create(sc->sc_dmat, 2 * 0x800, 1, 2 * 0x800, 0, 161 BUS_DMA_NOWAIT, &sc->sc_dmam_tx) != 0) { 162 printf(": failed to allocate TX DMA map.\n"); 163 return; 164 } 165 166 if (bus_dmamap_load(sc->sc_dmat, sc->sc_dmam_tx, sc->sc_txbuf, 167 2 * 0x800, NULL, BUS_DMA_NOWAIT) != 0) { 168 printf(": failed to map TX DMA mapping.\n"); 169 return; 170 } 171 172 if (bus_dmamap_create(sc->sc_dmat, MC_RXDMABUFS * 0x800, 1, 173 MC_RXDMABUFS * 0x800, 0, BUS_DMA_NOWAIT, &sc->sc_dmam_rx) != 0) { 174 printf(": failed to allocate RX DMA map.\n"); 175 return; 176 } 177 178 if (bus_dmamap_load(sc->sc_dmat, sc->sc_dmam_rx, sc->sc_rxbuf, 179 MC_RXDMABUFS * 0x800, NULL, BUS_DMA_NOWAIT) != 0) { 180 printf(": failed to map RX DMA mapping.\n"); 181 return; 182 } 183 184 sc->sc_txbuf_phys = sc->sc_dmasegs_tx.ds_addr; 185 sc->sc_rxbuf_phys = sc->sc_dmasegs_rx.ds_addr; 186 187 sc->sc_bus_init = mc_obio_init; 188 sc->sc_putpacket = mc_obio_put; 189 190 /* disable receive DMA */ 191 psc_reg2(PSC_ENETRD_CTL) = 0x8800; 192 psc_reg2(PSC_ENETRD_CTL) = 0x1000; 193 psc_reg2(PSC_ENETRD_CMD + PSC_SET0) = 0x1100; 194 psc_reg2(PSC_ENETRD_CMD + PSC_SET1) = 0x1100; 195 196 /* disable transmit DMA */ 197 psc_reg2(PSC_ENETWR_CTL) = 0x8800; 198 psc_reg2(PSC_ENETWR_CTL) = 0x1000; 199 psc_reg2(PSC_ENETWR_CMD + PSC_SET0) = 0x1100; 200 psc_reg2(PSC_ENETWR_CMD + PSC_SET1) = 0x1100; 201 202 /* install interrupt handlers */ 203 add_psc_lev4_intr(PSCINTR_ENET_DMA, mc_dmaintr, sc); 204 add_psc_lev3_intr(mcintr, sc); 205 206 /* enable MACE DMA interrupts */ 207 psc_reg1(PSC_LEV4_IER) = 0x80 | (1 << PSCINTR_ENET_DMA); 208 209 /* don't know what this does */ 210 psc_reg2(PSC_ENETWR_CTL) = 0x9000; 211 psc_reg2(PSC_ENETRD_CTL) = 0x9000; 212 psc_reg2(PSC_ENETWR_CTL) = 0x0400; 213 psc_reg2(PSC_ENETRD_CTL) = 0x0400; 214 215 /* enable MACE interrupts */ 216 psc_reg1(PSC_LEV3_IER) = 0x80 | (1 << PSCINTR_ENET); 217 218 /* mcsetup returns 1 if something fails */ 219 if (mcsetup(sc, myaddr)) { 220 /* disable interrupts */ 221 psc_reg1(PSC_LEV4_IER) = (1 << PSCINTR_ENET_DMA); 222 psc_reg1(PSC_LEV3_IER) = (1 << PSCINTR_ENET); 223 /* remove interrupt handlers */ 224 remove_psc_lev4_intr(PSCINTR_ENET_DMA); 225 remove_psc_lev3_intr(); 226 227 bus_space_unmap(sc->sc_regt, sc->sc_regh, MC_REGSIZE); 228 return; 229 } 230 } 231 232 /* Bus-specific initialization */ 233 hide void 234 mc_obio_init(struct mc_softc *sc) 235 { 236 mc_reset_rxdma(sc); 237 mc_reset_txdma(sc); 238 } 239 240 hide void 241 mc_obio_put(struct mc_softc *sc, u_int len) 242 { 243 int offset = sc->sc_txset == 0 ? 0 : 0x800; 244 245 bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam_tx, offset, 0x800, 246 BUS_DMASYNC_PREWRITE); 247 psc_reg4(PSC_ENETWR_ADDR + sc->sc_txset) = sc->sc_txbuf_phys + offset; 248 psc_reg4(PSC_ENETWR_LEN + sc->sc_txset) = len; 249 psc_reg2(PSC_ENETWR_CMD + sc->sc_txset) = 0x9800; 250 bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam_tx, offset, 0x800, 251 BUS_DMASYNC_POSTWRITE); 252 253 sc->sc_txset ^= 0x10; 254 } 255 256 /* 257 * Interrupt handler for the MACE DMA completion interrupts 258 */ 259 int 260 mc_dmaintr(void *arg) 261 { 262 struct mc_softc *sc = arg; 263 u_int16_t status; 264 u_int32_t bufsleft, which; 265 int head; 266 267 /* 268 * Not sure what this does... figure out if this interrupt is 269 * really ours? 270 */ 271 while ((which = psc_reg4(0x804)) != psc_reg4(0x804)) 272 ; 273 if ((which & 0x60000000) == 0) 274 return 0; 275 276 /* Get the read channel status */ 277 status = psc_reg2(PSC_ENETRD_CTL); 278 if (status & 0x2000) { 279 /* I think this is an exceptional condition. Reset the DMA */ 280 mc_reset_rxdma(sc); 281 #ifdef MCDEBUG 282 printf("%s: resetting receive DMA channel (status 0x%04x)\n", 283 sc->sc_dev.dv_xname, status); 284 #endif 285 } else if (status & 0x100) { 286 /* We've received some packets from the MACE */ 287 int offset; 288 289 /* Clear the interrupt */ 290 psc_reg2(PSC_ENETRD_CMD + sc->sc_rxset) = 0x1100; 291 292 /* See how may receive buffers are left */ 293 bufsleft = psc_reg4(PSC_ENETRD_LEN + sc->sc_rxset); 294 head = MC_RXDMABUFS - bufsleft; 295 296 #if 0 /* I don't think this should ever happen */ 297 if (head == sc->sc_tail) { 298 #ifdef MCDEBUG 299 printf("%s: head == tail: suspending DMA?\n", 300 sc->sc_dev.dv_xname); 301 #endif 302 psc_reg2(PSC_ENETRD_CMD + sc->sc_rxset) = 0x9000; 303 } 304 #endif 305 306 /* Loop through, processing each of the packets */ 307 for (; sc->sc_tail < head; sc->sc_tail++) { 308 offset = sc->sc_tail * 0x800; 309 310 bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam_rx, 311 PAGE_SIZE + offset, 0x800, 312 BUS_DMASYNC_PREREAD); 313 314 sc->sc_rxframe.rx_rcvcnt = sc->sc_rxbuf[offset]; 315 sc->sc_rxframe.rx_rcvsts = sc->sc_rxbuf[offset+2]; 316 sc->sc_rxframe.rx_rntpc = sc->sc_rxbuf[offset+4]; 317 sc->sc_rxframe.rx_rcvcc = sc->sc_rxbuf[offset+6]; 318 sc->sc_rxframe.rx_frame = sc->sc_rxbuf + offset + 16; 319 320 mc_rint(sc); 321 322 bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam_rx, 323 PAGE_SIZE + offset, 0x800, 324 BUS_DMASYNC_POSTREAD); 325 } 326 327 /* 328 * If we're out of buffers, reset this register set 329 * and switch to the other one. Otherwise, reactivate 330 * this set. 331 */ 332 if (bufsleft == 0) { 333 mc_reset_rxdma_set(sc, sc->sc_rxset); 334 sc->sc_rxset ^= 0x10; 335 } else 336 psc_reg2(PSC_ENETRD_CMD + sc->sc_rxset) = 0x9800; 337 } 338 339 /* Get the write channel status */ 340 status = psc_reg2(PSC_ENETWR_CTL); 341 if (status & 0x2000) { 342 /* I think this is an exceptional condition. Reset the DMA */ 343 mc_reset_txdma(sc); 344 #ifdef MCDEBUG 345 printf("%s: resetting transmit DMA channel (status 0x%04x)\n", 346 sc->sc_dev.dv_xname, status); 347 #endif 348 } else if (status & 0x100) { 349 /* Clear the interrupt and switch register sets */ 350 psc_reg2(PSC_ENETWR_CMD + sc->sc_txseti) = 0x100; 351 sc->sc_txseti ^= 0x10; 352 } 353 354 return 1; 355 } 356 357 358 hide void 359 mc_reset_rxdma(struct mc_softc *sc) 360 { 361 u_int8_t maccc; 362 363 /* Disable receiver, reset the DMA channels */ 364 maccc = NIC_GET(sc, MACE_MACCC); 365 NIC_PUT(sc, MACE_MACCC, maccc & ~ENRCV); 366 psc_reg2(PSC_ENETRD_CTL) = 0x8800; 367 mc_reset_rxdma_set(sc, 0); 368 psc_reg2(PSC_ENETRD_CTL) = 0x400; 369 370 psc_reg2(PSC_ENETRD_CTL) = 0x8800; 371 mc_reset_rxdma_set(sc, 0x10); 372 psc_reg2(PSC_ENETRD_CTL) = 0x400; 373 374 /* Reenable receiver, reenable DMA */ 375 NIC_PUT(sc, MACE_MACCC, maccc); 376 sc->sc_rxset = 0; 377 378 psc_reg2(PSC_ENETRD_CMD + PSC_SET0) = 0x9800; 379 psc_reg2(PSC_ENETRD_CMD + PSC_SET1) = 0x9800; 380 } 381 382 hide void 383 mc_reset_rxdma_set(struct mc_softc *sc, int set) 384 { 385 /* disable DMA while modifying the registers, then reenable DMA */ 386 psc_reg2(PSC_ENETRD_CMD + set) = 0x0100; 387 psc_reg4(PSC_ENETRD_ADDR + set) = sc->sc_rxbuf_phys; 388 psc_reg4(PSC_ENETRD_LEN + set) = MC_RXDMABUFS; 389 psc_reg2(PSC_ENETRD_CMD + set) = 0x9800; 390 sc->sc_tail = 0; 391 } 392 393 hide void 394 mc_reset_txdma(struct mc_softc *sc) 395 { 396 u_int8_t maccc; 397 398 psc_reg2(PSC_ENETWR_CTL) = 0x8800; 399 maccc = NIC_GET(sc, MACE_MACCC); 400 NIC_PUT(sc, MACE_MACCC, maccc & ~ENXMT); 401 sc->sc_txset = sc->sc_txseti = 0; 402 psc_reg2(PSC_ENETWR_CTL) = 0x400; 403 NIC_PUT(sc, MACE_MACCC, maccc); 404 } 405 406 hide int 407 mc_obio_getaddr(struct mc_softc *sc, u_int8_t *lladdr) 408 { 409 bus_space_handle_t bsh; 410 u_char csum; 411 412 if (bus_space_map(sc->sc_regt, MACE_PROM_BASE, 8*16, 0, &bsh)) { 413 printf(": failed to map space to read MACE address.\n%s", 414 sc->sc_dev.dv_xname); 415 return (-1); 416 } 417 418 if (!mac68k_bus_space_probe(sc->sc_regt, bsh, 0, 1)) { 419 bus_space_unmap(sc->sc_regt, bsh, 8*16); 420 return (-1); 421 } 422 423 csum = mc_get_enaddr(sc->sc_regt, bsh, 1, lladdr); 424 if (csum != 0xff) 425 printf(": ethernet PROM checksum failed (0x%x != 0xff)\n%s", 426 (int)csum, sc->sc_dev.dv_xname); 427 428 bus_space_unmap(sc->sc_regt, bsh, 8*16); 429 430 return (csum == 0xff ? 0 : -1); 431 } 432
Indexes created Thu Oct 02 14:10:14 GMT 2025