INSTALL revision 1.8 
1#	$NetBSD: INSTALL,v 1.8 1999/01/27 12:43:17 tsubai Exp $
2#
3# config file for INSTALL FLOPPY
4#
5
6include		"arch/macppc/conf/std.macppc"
7
8maxusers	32
9
10# Enable the hooks used for initializing the ram-disk.
11options 	MEMORY_DISK_HOOKS
12options 	MEMORY_DISK_IS_ROOT	# Force root on ram-disk
13options 	MINIROOTSIZE=3072	# 1.5 Megabytes
14
15# Standard system options
16options 	BUFPAGES=800
17
18# Compatibility options
19options 	COMPAT_13	# NetBSD 1.3,
20options 	COMPAT_43	# and 4.3BSD
21
22# File systems
23file-system 	FFS		# UFS
24file-system 	MFS		# memory file system
25file-system 	NFS		# Network File System client
26file-system 	CD9660		# ISO 9660 + Rock Ridge file system
27file-system 	MSDOSFS		# MS-DOS file system
28file-system 	KERNFS		# /kern
29
30# Networking options
31options 	INET		# IP + ICMP + TCP + UDP
32options 	NMBCLUSTERS=1024
33options 	NFS_BOOT_DHCP, NFS_BOOT_BOOTPARAM
34
35options 	ZS_TXDMA	# Use dma on zs output
36options 	WSEMUL_VT100	# VT100 / VT220 emulation
37
38# Kernel root file system and dump configuration.
39config		netbsd	root on ? type ?
40
41#
42# Device configuration
43#
44
45mainbus0 at root
46
47cpu*	at mainbus0
48
49pci0	at mainbus0 bus ?
50pci1	at mainbus0 bus ?
51pchb*	at pci? dev ? function ?	# PCI-Host bridges
52
53#de*	at pci? dev ? function ?	# DEC 21x4x-based Ethernet
54ep*	at pci? dev ? function ?
55ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
56adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
57ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
58
59scsibus* at adv?
60scsibus* at ahc?
61
62obio0	at pci? dev ? function ?
63nvram0	at obio0			# nvram
64
65adb0	at obio0			# Apple Desktop Bus
66akbd*	at adb?				# ADB keyboard
67ams*	at adb?				# ADB mouse
68
69ofb0	at pci? dev ? function ?	# Generic Open Firmware Framebuffer
70wsdisplay* at ofb? console ?
71wskbd0	at akbd? console ?
72
73mc0	at obio0			# MACE ethernet
74bm0	at obio0			# bmac ethernet
75esp0	at obio0 flags 0x00ff		# 53c9x SCSI
76scsibus0 at esp0
77
78zsc0	at obio0
79zstty0	at zsc0 channel 0
80zstty1	at zsc0 channel 1
81
82sd*	at scsibus? target ? lun ?	# SCSI disks
83st*	at scsibus? target ? lun ?	# SCSI tape drives
84cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
85
86wdc*	at obio0 flags 0x0
87wd*	at wdc? channel ? drive ? flags 0x0000
88
89atapibus* at wdc? channel ?
90
91cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
92sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
93
94pseudo-device	md		1	# memory disk
95pseudo-device	loop			# network loopback
96pseudo-device	sl		2	# Serial Line IP
97pseudo-device	pty		64	# pseudo-terminals
98