xref: /src/sys/arch/macppc/conf/POWERMAC_G5_11_2

# Lean and mean config file for the POWERMAC G5
# Author: Sanjay Lal <sanjayl@kymasys.com>

include 	"arch/macppc/conf/std.macppc.g5"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
maxusers	32

options 	PMAC_G5
options 	ALTIVEC		# Include AltiVec support

# Standard system options
options 	INSECURE	# disable kernel security levels

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop
options 	KTRACE		# system call tracing via ktrace(1)

options 	SYSVMSG		# System V message queues
options 	SYSVSEM		# System V semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V shared memory

options 	USERCONF	# userconf(4) support
#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options 	BUFQ_READPRIO
options 	BUFQ_PRIOCSCAN

# Diagnostic/debugging support options
options 	DIAGNOSTIC	# cheap kernel consistency checks
options 	DEBUG		# expensive debugging checks/support
options 	ZS_CONSOLE_ABORT# allow break to get into DDB on serial
options 	DDB		# in-kernel debugger
options 	DDB_ONPANIC=1	# don't go into ddb on panic.
options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
options 	TRAP_PANICWAIT

makeoptions 	DEBUG="-g"	# compile full symbol table

# Compatibility options
include 	"conf/compat_netbsd30.config"
#options 	COMPAT_386BSD_MBRPART # recognize old partition ID

# File systems
file-system 	FFS		# UFS
file-system 	MFS		# memory file system
file-system 	KERNFS		# /kern
file-system 	PROCFS		# /proc
file-system 	NFS		# Network File System client

# File system options
#options 	QUOTA		# legacy UFS quotas
#options 	QUOTA2		# new, in-filesystem UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
#options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
#options 	NFSSERVER	# Network File System server
#options 	FFS_NO_SNAPSHOT	# ffs snapshots
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.
#options 	APPLE_UFS	# Apple UFS support in FFS
# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
options 	MIIVERBOSE	# verbose PHY autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space

# wscons options
#options 	WSEMUL_SUN			# sun terminal emulation
options 	WSEMUL_VT100			# VT100 / VT220 emulation
options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
#options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
options 	FONT_GALLANT12x22

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on gem0 type nfs
#options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# Device configuration
#

mainbus* at root

cpu*	at mainbus?
options 	MULTIPROCESSOR
ibmcpc* at mainbus?
uninorth*	at mainbus?
memory* at mainbus?
spdmem* at memory? addr ?

uni_n*	at mainbus?
ki2c*	at uni_n?			# Keywest I2C

smu* 		at mainbus?
#options 	SMU_DEBUG
smuiic* 	at smu?
iic* 		at smuiic?

pci*	at ibmcpc? bus ?
pci*	at uninorth? bus ?
pci*	at ppb? bus ?

pchb*	at pci? dev ? function ?	# PCI-Host bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges

obio0		at pci? dev ? function ?
zsc*		at obio?
zstty*		at zsc? channel ?
#snapper* 	at obio?
ki2c*		at obio?	# Keywest I2C
iic*		at ki2c?

admtemp* 	at iic?
lmtemp* 	at iic?
dstemp* 	at iic?
smusat* 	at iic?
deq* 		at iic?

# Audio support
#audio*	at audiobus?

#spkr*	at audio?		# PC speaker (synthesized)
#wsbell* at spkr?

bge*	at pci? dev ? function ?	# gmac ethernet
brgphy*	at mii? phy ?			# Broadcom BCM5400 PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs

# PCI USB controllers
ohci*	at pci? dev ? function ?	# USB Open Host Controller
ehci*	at pci? dev ? function ?	# USB Enhanced Host Controller

usb*	at ohci?					# USB bus support
uhub*	at usb?						# USB Hubs
uhub*	at uhub? port ?
uhidev*	at uhub? port ? configuration ? interface ?	# USB HID device
uhid*	at uhidev? reportid ?				# USB Generic HID
ukbd*	at uhidev? reportid ?				# USB Keyboards
wskbd*	at ukbd? console ?
ums*	at uhidev? reportid ?				# USB Mice
wsmouse* at ums?

genfb*	at pci? dev ? function ?
wdc* 	at pci? dev ? function ?		# Kauai ATA
svwsata* at pci? dev ? function ?		# ServerWorks SATA controllers
obio*	at pci? dev ? function ?
zsc*	at obio?
zstty*	at zsc? channel ?

wsdisplay0	at wsemuldisplaydev? console 1
wsdisplay*	at wsemuldisplaydev?

atabus* at ata?
wd*	at atabus? drive ? flags 0x0000
atapibus* at atapi?
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown

#pseudo-device 	crypto			# opencrypto framework
					# (disabled, requires generic softints)
pseudo-device	vnd		4	# disk-like interface to files
pseudo-device	md			# memory disk device
pseudo-device	loop			# network loopback
pseudo-device	pty			# pseudo-terminals
pseudo-device	openfirm		# /dev/openfirm
pseudo-device	wsmux			# mouse and keyboard multiplexor
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms
pseudo-device	nsmb			# SMB requester
pseudo-device   bpfilter        8       # Berkeley packet filter
#pseudo-device	pf			# PF packet filter
#pseudo-device	pflog			# PF log if

options		OFWOEA_WSCONS_NO_ROM_FONT
options		EXSTORAGE_MAX=24

# Enable the hooks used for initializing the ram-disk.
#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT		# Force root on ram-disk
#options 	MEMORY_DISK_ROOT_SIZE=5000	# 25000 KiB
#options 	MEMORY_DISK_RBFLAGS=RB_SINGLE	# boot in single-user mode
#options		MEMORY_DISK_SERVER=1