smartbat.c revision 1.6
1 /* $NetBSD: smartbat.c,v 1.6 2011/07/01 18:41:52 dyoung Exp $ */ 2 3 /*- 4 * Copyright (c) 2007 Michael Lorenz 5 * 2008 Magnus Henoch 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 19 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 20 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 21 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 22 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 25 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 27 * POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __KERNEL_RCSID(0, "$NetBSD: smartbat.c,v 1.6 2011/07/01 18:41:52 dyoung Exp $"); 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/device.h> 37 #include <sys/proc.h> 38 39 #include <dev/sysmon/sysmonvar.h> 40 #include <dev/sysmon/sysmon_taskq.h> 41 42 #include <macppc/dev/pmuvar.h> 43 #include <macppc/dev/batteryvar.h> 44 #include <sys/bus.h> 45 #include "opt_battery.h" 46 47 #ifdef SMARTBAT_DEBUG 48 #define DPRINTF printf 49 #else 50 #define DPRINTF while (0) printf 51 #endif 52 53 #define BAT_AC_PRESENT 0 54 #define BAT_PRESENT 1 55 #define BAT_VOLTAGE 2 56 #define BAT_CURRENT 3 57 #define BAT_MAX_CHARGE 4 58 #define BAT_CHARGE 5 59 #define BAT_CHARGING 6 60 #define BAT_FULL 7 61 #define BAT_NSENSORS 8 /* number of sensors */ 62 63 struct smartbat_softc { 64 struct device sc_dev; 65 struct pmu_ops *sc_pmu_ops; 66 int sc_num; 67 68 /* envsys stuff */ 69 struct sysmon_envsys *sc_sme; 70 envsys_data_t sc_sensor[BAT_NSENSORS]; 71 struct sysmon_pswitch sc_sm_acpower; 72 73 /* battery status */ 74 int sc_flags; 75 int sc_oflags; 76 int sc_voltage; 77 int sc_charge; 78 int sc_max_charge; 79 int sc_draw; 80 int sc_time; 81 uint32_t sc_timestamp; 82 }; 83 84 static void smartbat_attach(device_t, device_t, void *); 85 static int smartbat_match(device_t, cfdata_t, void *); 86 static void smartbat_setup_envsys(struct smartbat_softc *); 87 static void smartbat_refresh(struct sysmon_envsys *, envsys_data_t *); 88 static void smartbat_poll(void *); 89 static int smartbat_update(struct smartbat_softc *, int); 90 91 CFATTACH_DECL(smartbat, sizeof(struct smartbat_softc), 92 smartbat_match, smartbat_attach, NULL, NULL); 93 94 static int 95 smartbat_match(device_t parent, cfdata_t cf, void *aux) 96 { 97 struct battery_attach_args *baa = aux; 98 99 if (baa->baa_type == BATTERY_TYPE_SMART) 100 return 1; 101 102 return 0; 103 } 104 105 static void 106 smartbat_attach(device_t parent, device_t self, void *aux) 107 { 108 struct battery_attach_args *baa = aux; 109 struct smartbat_softc *sc = device_private(self); 110 111 sc->sc_pmu_ops = baa->baa_pmu_ops; 112 sc->sc_num = baa->baa_num; 113 114 printf(" addr %d: smart battery\n", sc->sc_num); 115 116 smartbat_update(sc, 1); 117 /* trigger a status update */ 118 sc->sc_oflags = ~sc->sc_flags; 119 120 smartbat_setup_envsys(sc); 121 sc->sc_pmu_ops->register_callback(sc->sc_pmu_ops->cookie, smartbat_poll, 122 sc); 123 124 memset(&sc->sc_sm_acpower, 0, sizeof(struct sysmon_pswitch)); 125 sc->sc_sm_acpower.smpsw_name = "AC Power"; 126 sc->sc_sm_acpower.smpsw_type = PSWITCH_TYPE_ACADAPTER; 127 if (sysmon_pswitch_register(&sc->sc_sm_acpower) != 0) 128 printf("%s: unable to register AC power status with sysmon\n", 129 sc->sc_dev.dv_xname); 130 } 131 132 #define INITDATA(index, unit, string) \ 133 sc->sc_sensor[index].units = unit; \ 134 snprintf(sc->sc_sensor[index].desc, \ 135 sizeof(sc->sc_sensor[index].desc), "%s", string); 136 137 static void 138 smartbat_setup_envsys(struct smartbat_softc *sc) 139 { 140 int i; 141 142 sc->sc_sme = sysmon_envsys_create(); 143 144 INITDATA(BAT_AC_PRESENT, ENVSYS_INDICATOR, "AC present"); 145 INITDATA(BAT_PRESENT, ENVSYS_INDICATOR, "Battery present"); 146 INITDATA(BAT_VOLTAGE, ENVSYS_SVOLTS_DC, "Battery voltage"); 147 INITDATA(BAT_CURRENT, ENVSYS_SAMPS, "Battery current"); 148 INITDATA(BAT_MAX_CHARGE, ENVSYS_SAMPHOUR, "Battery design cap"); 149 INITDATA(BAT_CHARGE, ENVSYS_SAMPHOUR, "Battery charge"); 150 INITDATA(BAT_CHARGING, ENVSYS_BATTERY_CHARGE, "Battery charging"); 151 INITDATA(BAT_FULL, ENVSYS_INDICATOR, "Battery full"); 152 #undef INITDATA 153 154 for (i = 0; i < BAT_NSENSORS; i++) { 155 if (sysmon_envsys_sensor_attach(sc->sc_sme, 156 &sc->sc_sensor[i])) { 157 sysmon_envsys_destroy(sc->sc_sme); 158 return; 159 } 160 } 161 162 sc->sc_sme->sme_name = sc->sc_dev.dv_xname; 163 sc->sc_sme->sme_cookie = sc; 164 sc->sc_sme->sme_refresh = smartbat_refresh; 165 166 if (sysmon_envsys_register(sc->sc_sme)) { 167 aprint_error("%s: unable to register with sysmon\n", 168 sc->sc_dev.dv_xname); 169 sysmon_envsys_destroy(sc->sc_sme); 170 } 171 } 172 173 static void 174 smartbat_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 175 { 176 struct smartbat_softc *sc = sme->sme_cookie; 177 int which = edata->sensor, present; 178 179 smartbat_update(sc, 0); 180 present = (sc->sc_flags & PMU_PWR_BATT_PRESENT) != 0; 181 182 if (present) { 183 switch (which) { 184 case BAT_AC_PRESENT: 185 edata->value_cur = (sc->sc_flags & PMU_PWR_AC_PRESENT); 186 break; 187 case BAT_PRESENT: 188 edata->value_cur = present; 189 break; 190 case BAT_VOLTAGE: 191 edata->value_cur = sc->sc_voltage * 1000; 192 break; 193 case BAT_CURRENT: 194 edata->value_cur = sc->sc_draw * 1000; 195 break; 196 case BAT_MAX_CHARGE: 197 edata->value_cur = sc->sc_max_charge * 1000; 198 break; 199 case BAT_CHARGE: 200 edata->value_cur = sc->sc_charge * 1000; 201 break; 202 case BAT_CHARGING: 203 if ((sc->sc_flags & PMU_PWR_BATT_CHARGING) && 204 (sc->sc_flags & PMU_PWR_AC_PRESENT)) 205 edata->value_cur = 1; 206 else 207 edata->value_cur = 0; 208 209 break; 210 case BAT_FULL: 211 edata->value_cur = (sc->sc_flags & PMU_PWR_BATT_FULL); 212 break; 213 } 214 edata->state = ENVSYS_SVALID; 215 } else { 216 /* battery isn't there */ 217 switch (which) { 218 case BAT_AC_PRESENT: 219 edata->value_cur = (sc->sc_flags & PMU_PWR_AC_PRESENT); 220 edata->state = ENVSYS_SVALID; 221 break; 222 case BAT_PRESENT: 223 edata->value_cur = present; 224 edata->state = ENVSYS_SVALID; 225 break; 226 default: 227 edata->state = ENVSYS_SINVALID; 228 edata->value_cur = 0; 229 } 230 } 231 } 232 233 /* 234 * Thanks to Paul Mackerras and Fabio Riccardi's Linux implementation 235 * for a clear description of the PMU results. 236 */ 237 static int 238 smartbat_update(struct smartbat_softc *sc, int out) 239 { 240 int len; 241 uint8_t buf[16]; 242 uint8_t battery_number; 243 244 if (sc->sc_timestamp == time_second) 245 return 0; 246 sc->sc_timestamp = time_second; 247 248 /* sc_num starts from 0, but we need to start from 1 */ 249 battery_number = sc->sc_num + 1; 250 len = sc->sc_pmu_ops->do_command(sc->sc_pmu_ops->cookie, 251 PMU_SMART_BATTERY_STATE, 252 1, &battery_number, 253 16, buf); 254 255 if (len < 0) { 256 DPRINTF("%s: couldn't get battery data\n", sc->sc_dev.dv_xname); 257 /* XXX: the return value is never checked */ 258 return -1; 259 } 260 261 /* Now, buf[0] is the command number, which we already know. 262 That's why all indexes are off by one compared to 263 pm_battery_info_smart in pm_direct.c. 264 */ 265 sc->sc_flags = buf[2]; 266 267 /* XXX: are these all valid for smart batteries? */ 268 if (out) { 269 printf(" flags: %x", buf[2]); 270 if (buf[2] & PMU_PWR_AC_PRESENT) 271 printf(" AC"); 272 if (buf[2] & PMU_PWR_BATT_CHARGING) 273 printf(" charging"); 274 if (buf[2] & PMU_PWR_BATT_PRESENT) 275 printf(" present"); 276 if (buf[2] & PMU_PWR_BATT_FULL) 277 printf(" full"); 278 printf("\n"); 279 } 280 281 switch(buf[1]) { 282 case 3: 283 case 4: 284 sc->sc_charge = buf[3]; 285 sc->sc_max_charge = buf[4]; 286 sc->sc_draw = *((signed char *)&buf[5]); 287 sc->sc_voltage = buf[6]; 288 break; 289 case 5: 290 sc->sc_charge = ((buf[3] << 8) | (buf[4])); 291 sc->sc_max_charge = ((buf[5] << 8) | (buf[6])); 292 sc->sc_draw = *((signed short *)&buf[7]); 293 sc->sc_voltage = ((buf[9] << 8) | (buf[8])); 294 break; 295 default: 296 /* XXX - Error condition */ 297 DPRINTF("%s: why is buf[1] %x?\n", sc->sc_dev.dv_xname, buf[1]); 298 sc->sc_charge = 0; 299 sc->sc_max_charge = 0; 300 sc->sc_draw = 0; 301 sc->sc_voltage = 0; 302 break; 303 } 304 305 return 1; 306 } 307 308 static void 309 smartbat_poll(void *cookie) 310 { 311 struct smartbat_softc *sc = cookie; 312 313 smartbat_update(sc, 0); 314 if ((sc->sc_flags & PMU_PWR_AC_PRESENT) == sc->sc_oflags) 315 return; 316 317 sc->sc_oflags = sc->sc_flags & PMU_PWR_AC_PRESENT; 318 319 sysmon_pswitch_event(&sc->sc_sm_acpower, 320 sc->sc_oflags ? PSWITCH_EVENT_PRESSED : 321 PSWITCH_EVENT_RELEASED); 322 } 323
Indexes created Tue Sep 23 22:09:46 GMT 2025