sbtimer.c revision 1.17
1/* $NetBSD: sbtimer.c,v 1.17 2011/02/01 06:13:08 matt Exp $ */
2
3/*
4 * Copyright 2000, 2001
5 * Broadcom Corporation. All rights reserved.
6 *
7 * This software is furnished under license and may be used and copied only
8 * in accordance with the following terms and conditions.  Subject to these
9 * conditions, you may download, copy, install, use, modify and distribute
10 * modified or unmodified copies of this software in source and/or binary
11 * form. No title or ownership is transferred hereby.
12 *
13 * 1) Any source code used, modified or distributed must reproduce and
14 *    retain this copyright notice and list of conditions as they appear in
15 *    the source file.
16 *
17 * 2) No right is granted to use any trade name, trademark, or logo of
18 *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
19 *    used to endorse or promote products derived from this software
20 *    without the prior written permission of Broadcom Corporation.
21 *
22 * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
23 *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
24 *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
25 *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
26 *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
27 *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
30 *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
31 *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
32 *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35#include <sys/cdefs.h>
36__KERNEL_RCSID(0, "$NetBSD: sbtimer.c,v 1.17 2011/02/01 06:13:08 matt Exp $");
37
38#include <sys/param.h>
39#include <sys/device.h>
40#include <sys/systm.h>
41#include <sys/kernel.h>
42
43#include <mips/locore.h>
44
45#include <mips/sibyte/include/sb1250_regs.h>
46#include <mips/sibyte/include/sb1250_scd.h>
47#include <mips/sibyte/dev/sbscdvar.h>
48
49struct sbtimer_softc {
50	device_t sc_dev;
51	void	*sc_intrhand;
52	int	sc_flags;
53	void	*sc_addr_icnt, *sc_addr_cnt, *sc_addr_cfg;
54};
55#define	SBTIMER_CLOCK		1
56#define	SBTIMER_STATCLOCK	2
57
58#define	READ_REG(rp)		(mips3_ld((volatile uint64_t *)(rp)))
59#define	WRITE_REG(rp, val)	(mips3_sd((volatile uint64_t *)(rp), (val)))
60
61static int	sbtimer_match(device_t, cfdata_t, void *);
62static void	sbtimer_attach(device_t, device_t, void *);
63
64CFATTACH_DECL_NEW(sbtimer, sizeof(struct sbtimer_softc),
65    sbtimer_match, sbtimer_attach, NULL, NULL);
66
67static void	sbtimer_clockintr(void *arg, uint32_t status, vaddr_t pc);
68static void	sbtimer_statclockintr(void *arg, uint32_t status, vaddr_t pc);
69static void	sbtimer_miscintr(void *arg, uint32_t status, vaddr_t pc);
70
71static void	sbtimer_clock_init(void *arg);
72
73static int
74sbtimer_match(device_t parent, cfdata_t match, void *aux)
75{
76	struct sbscd_attach_args *sap = aux;
77
78	if (sap->sa_locs.sa_type != SBSCD_DEVTYPE_TIMER)
79		return (0);
80
81	return 1;
82}
83
84static void
85sbtimer_attach(device_t parent, device_t self, void *aux)
86{
87	struct sbscd_attach_args *sa = aux;
88	struct sbtimer_softc *sc = device_private(self);
89	void (*fun)(void *, uint32_t, vaddr_t);
90	int ipl;
91	const char *comment = "";
92
93	sc->sc_dev = self;
94
95	sc->sc_flags = device_cfdata(sc->sc_dev)->cf_flags;
96	sc->sc_addr_icnt = (uint64_t *)MIPS_PHYS_TO_KSEG1(sa->sa_locs.sa_addr +
97	    R_SCD_TIMER_INIT);
98	sc->sc_addr_cnt = (uint64_t *)MIPS_PHYS_TO_KSEG1(sa->sa_locs.sa_addr +
99	    R_SCD_TIMER_CNT);
100	sc->sc_addr_cfg = (uint64_t *)MIPS_PHYS_TO_KSEG1(sa->sa_locs.sa_addr +
101	    R_SCD_TIMER_CFG);
102
103	aprint_normal(": ");
104	if ((sc->sc_flags & SBTIMER_CLOCK) != 0) {
105		ipl = IPL_CLOCK;
106		fun = sbtimer_clockintr;
107
108		if (system_set_clockfns(sc, sbtimer_clock_init)) {
109			/* not really the clock */
110			sc->sc_flags &= ~SBTIMER_CLOCK;
111			comment = " (not system timer)";
112			goto not_really;
113		}
114		aprint_normal("system timer");
115	} else if ((sc->sc_flags & SBTIMER_STATCLOCK) != 0) {
116		ipl = IPL_HIGH;
117		fun = sbtimer_statclockintr;
118
119		/* XXX make sure it's the statclock */
120		if (1) {
121			/* not really the statclock */
122			sc->sc_flags &= ~SBTIMER_STATCLOCK;
123			comment = " (not system statistics timer)";
124			goto not_really;
125		}
126		aprint_normal("system statistics timer");
127	} else {
128not_really:
129		ipl = IPL_BIO;			/* XXX -- pretty low */
130		fun = sbtimer_miscintr;
131		aprint_normal("general-purpose timer%s", comment);
132	}
133	aprint_normal("\n");
134
135	/* clear intr & disable timer. */
136	WRITE_REG(sc->sc_addr_cfg, 0x00);		/* XXX */
137
138	sc->sc_intrhand = cpu_intr_establish(sa->sa_locs.sa_intr[0], ipl,
139	    fun, sc);
140}
141
142static void
143sbtimer_clock_init(void *arg)
144{
145	struct sbtimer_softc *sc = arg;
146
147	if ((1000000 % hz) == 0) {
148		aprint_normal_dev(sc->sc_dev, "%dHz system timer\n", hz);
149	} else {
150		aprint_error_dev(sc->sc_dev,
151		    "cannot get %dHz clock; using 1000Hz\n", hz);
152		hz = 1000;
153		tick = 1000000 / hz;
154	}
155
156	WRITE_REG(sc->sc_addr_cfg, 0x00);		/* XXX */
157	if (G_SYS_PLL_DIV(READ_REG(MIPS_PHYS_TO_KSEG1(A_SCD_SYSTEM_CFG))) == 0) {
158		aprint_debug_dev(sc->sc_dev,
159		    "PLL_DIV == 0; speeding up clock ticks for simulator\n");
160		WRITE_REG(sc->sc_addr_icnt, (tick/100) - 1); /* XXX */
161	} else {
162		WRITE_REG(sc->sc_addr_icnt, tick - 1);	/* XXX */
163	}
164	WRITE_REG(sc->sc_addr_cfg, 0x03);		/* XXX */
165}
166
167static void
168sbtimer_clockintr(void *arg, uint32_t status, vaddr_t pc)
169{
170	struct sbtimer_softc *sc = arg;
171	struct clockframe cf;
172
173	/* clear interrupt, but leave timer enabled and in repeating mode */
174	WRITE_REG(sc->sc_addr_cfg, 0x03);		/* XXX */
175
176	cf.pc = pc;
177	cf.sr = status;
178
179	hardclock(&cf);
180
181	/*
182	 * We never want a CPU core clock interrupt, so adjust the CP0
183	 * compare register to just before the CP0 clock register's value
184	 * each time.
185	 */
186	mips3_cp0_compare_write(mips3_cp0_count_read() - 1);
187}
188
189static void
190sbtimer_statclockintr(void *arg, uint32_t status, vaddr_t pc)
191{
192	struct sbtimer_softc *sc = arg;
193	struct clockframe cf;
194
195	/* clear intr & disable timer, reset initial count, re-enable timer */
196	WRITE_REG(sc->sc_addr_cfg, 0x00);		/* XXX */
197	/* XXX more to do */
198
199	cf.pc = pc;
200	cf.sr = status;
201
202	statclock(&cf);
203}
204
205static void
206sbtimer_miscintr(void *arg, uint32_t status, vaddr_t pc)
207{
208	struct sbtimer_softc *sc = arg;
209
210	/* disable timer */
211	WRITE_REG(sc->sc_addr_cfg, 0x00);		/* XXX */
212
213	/* XXX more to do */
214}
215