GENERIC revision 1.23 1 1.23 provos # $NetBSD: GENERIC,v 1.23 2002/10/06 02:11:58 provos Exp $
2 1.1 wdk #
3 1.13 gmcgarry # GENERIC machine description file
4 1.13 gmcgarry #
5 1.13 gmcgarry # This machine description file is used to generate the default NetBSD
6 1.13 gmcgarry # kernel. The generic kernel does not include all options, subsystems
7 1.13 gmcgarry # and device drivers, but should be useful for most applications.
8 1.1 wdk #
9 1.13 gmcgarry # The machine description file can be customised for your specific
10 1.13 gmcgarry # machine to reduce the kernel size and improve its performance.
11 1.13 gmcgarry #
12 1.13 gmcgarry # For further information on compiling NetBSD kernels, see the config(8)
13 1.13 gmcgarry # man page.
14 1.13 gmcgarry #
15 1.13 gmcgarry # For further information on hardware support for this architecture, see
16 1.13 gmcgarry # the intro(4) man page. For further information about kernel options
17 1.13 gmcgarry # for this architecture, see the options(4) man page. For an explanation
18 1.13 gmcgarry # of each device driver in this file see the section 4 man page for the
19 1.13 gmcgarry # device.
20 1.13 gmcgarry
21 1.1 wdk include "arch/mipsco/conf/std.mipsco"
22 1.18 atatat
23 1.18 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24 1.1 wdk
25 1.1 wdk maxusers 16
26 1.1 wdk
27 1.1 wdk options MIPS1 # R2000/R3000 support
28 1.1 wdk
29 1.1 wdk # Standard system options
30 1.1 wdk options KTRACE # system call tracing support
31 1.23 provos options SYSTRACE # system call vetting via systrace(1)
32 1.1 wdk options SYSVMSG # System V message queues
33 1.1 wdk options SYSVSEM # System V semaphores
34 1.11 lukem #options SEMMNI=10 # number of semaphore identifiers
35 1.11 lukem #options SEMMNS=60 # number of semaphores in system
36 1.11 lukem #options SEMUME=10 # max number of undo entries per process
37 1.11 lukem #options SEMMNU=30 # number of undo structures in system
38 1.1 wdk options SYSVSHM # System V shared memory
39 1.1 wdk #options SHMMAXPGS=1024 # 1024 pages is the default
40 1.1 wdk #options LKM # loadable kernel modules
41 1.1 wdk #options NTP # network time protocol
42 1.1 wdk #options UCONSOLE # users can redirect console (unsafe)
43 1.11 lukem options HZ=25
44 1.20 lukem options USERCONF # userconf(4) support
45 1.16 jdolecek #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
46 1.1 wdk
47 1.1 wdk # Debugging options
48 1.1 wdk options DDB # kernel dynamic debugger
49 1.1 wdk options DDB_HISTORY_SIZE=100 # enable history editing in DDB
50 1.1 wdk #options DEBUG # extra kernel debugging support
51 1.1 wdk options DIAGNOSTIC # extra kernel sanity checking
52 1.1 wdk options SCSIVERBOSE # Verbose SCSI errors
53 1.5 wdk
54 1.11 lukem #options KGDB # Remote kernel debug using gdb
55 1.11 lukem #options KGDB_DEV=0x0100 # KGDB port (this is serial0)
56 1.11 lukem #options KGDB_DEVRATE=19200 # KGDB Baud Rate (default=19200)
57 1.5 wdk #makeoptions DEBUG="-g" # Build kernel with debug symbols
58 1.1 wdk
59 1.1 wdk # Compatibility options
60 1.1 wdk options COMPAT_43 # compatibility with 4.3BSD binaries
61 1.1 wdk #options COMPAT_10 # NetBSD 1.0 binary compatibility
62 1.1 wdk #options COMPAT_11 # NetBSD 1.1 binary compatibility
63 1.1 wdk #options COMPAT_12 # NetBSD 1.2 binary compatibility
64 1.1 wdk options COMPAT_13 # NetBSD 1.3 binary compatibility
65 1.1 wdk options COMPAT_14 # NetBSD 1.4 binary compatibility
66 1.1 wdk #options EXEC_AOUT # exec a.out binaries
67 1.1 wdk #options EXEC_ECOFF # exec ecoff binaries
68 1.7 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
69 1.1 wdk
70 1.1 wdk # Filesystem options
71 1.1 wdk file-system FFS # Berkeley Fast Filesystem
72 1.1 wdk file-system NFS # Sun NFS-compatible filesystem client
73 1.1 wdk file-system KERNFS # kernel data-structure filesystem
74 1.1 wdk #file-system NULLFS # NULL layered filesystem
75 1.1 wdk #file-system MFS # memory-based filesystem
76 1.1 wdk #file-system FDESC # user file descriptor filesystem
77 1.1 wdk #file-system UMAPFS # uid/gid remapping filesystem
78 1.1 wdk #file-system LFS # Log-based filesystem (still experimental)
79 1.1 wdk #file-system PORTAL # portal filesystem (still experimental)
80 1.1 wdk file-system PROCFS # /proc
81 1.1 wdk file-system CD9660 # ISO 9660 + Rock Ridge file system
82 1.1 wdk #file-system UNION # union file system
83 1.1 wdk #file-system MSDOSFS # MS-DOS FAT filesystem(s).
84 1.1 wdk #
85 1.1 wdk options NFSSERVER # Sun NFS-compatible filesystem server
86 1.1 wdk options QUOTA # FFS quotas
87 1.1 wdk #options FFS_EI # FFS Endian Independant support
88 1.1 wdk
89 1.1 wdk # Networking options
90 1.1 wdk options INET # Internet protocols
91 1.1 wdk #options GATEWAY # IP packet forwarding
92 1.1 wdk #options MROUTING # packet forwarding of multicast packets
93 1.1 wdk #options NS # Xerox NS networking
94 1.1 wdk #options NSIP # Xerox NS tunneling over IP
95 1.1 wdk #options ISO,TPIP # OSI networking
96 1.1 wdk #options EON # OSI tunneling over IP
97 1.1 wdk #options CCITT,LLC,HDLC # X.25
98 1.1 wdk #options NETATALK # AppleTalk (over Ethernet) protocol
99 1.1 wdk #options PPP_BSDCOMP # BSD-Compress compression support for PPP
100 1.1 wdk #options PPP_DEFLATE # Deflate compression support for PPP
101 1.1 wdk #options PPP_FILTER # Active filter support for PPP (requires bpf)
102 1.1 wdk #options PFIL_HOOKS # pfil(9) packet filter hooks
103 1.1 wdk #options IPFILTER_LOG # ipmon(8) log support
104 1.22 martti #options IPFILTER_DEFAULT_BLOCK # block all packets by default
105 1.7 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
106 1.1 wdk
107 1.1 wdk config netbsd root on ? type ?
108 1.1 wdk
109 1.1 wdk mainbus0 at root
110 1.1 wdk
111 1.1 wdk cpu0 at mainbus0
112 1.1 wdk obio0 at mainbus0
113 1.1 wdk
114 1.1 wdk mkclock0 at obio0 addr 0xbd000000 # MK48T02 realtime clock
115 1.1 wdk
116 1.1 wdk rambo0 at obio0 addr 0xbc000000 # RAMBO dma & timer asic
117 1.1 wdk
118 1.1 wdk le0 at obio0 addr 0xba000000 # onboard LANCE ethernet
119 1.1 wdk
120 1.1 wdk # Not currently implemented
121 1.1 wdk #kb0 at obio0 addr 0xbfd00000 # keyboard
122 1.1 wdk #fb0 at obio0 addr 0x88000000 # framebuffer
123 1.1 wdk
124 1.1 wdk fd0 at obio0 addr 0xbe000000 # i82072 floppy disk controller
125 1.1 wdk
126 1.1 wdk zsc0 at obio0 addr 0xbb000000 # Base address for Z8530 SCC
127 1.1 wdk zstty0 at zsc0 channel 0 # tty00
128 1.1 wdk zstty1 at zsc0 channel 1 # tty01
129 1.1 wdk
130 1.1 wdk asc0 at obio0 addr 0xb8000000 # onboard NCR 53c94 SCSI controller
131 1.1 wdk
132 1.1 wdk scsibus0 at asc0
133 1.1 wdk
134 1.1 wdk sd* at scsibus? target ? lun ? # SCSI disks
135 1.1 wdk st* at scsibus? target ? lun ? # SCSI tapes
136 1.1 wdk cd* at scsibus? target ? lun ? # SCSI CD-ROMs
137 1.1 wdk ch* at scsibus? target ? lun ? # SCSI changer devices
138 1.1 wdk
139 1.1 wdk pseudo-device loop # loopback interface; required
140 1.2 jdolecek pseudo-device pty # pseudo-terminals
141 1.1 wdk #pseudo-device sl 2 # SLIP interfaces
142 1.1 wdk #pseudo-device ppp 2 # PPP interfaces
143 1.14 martin #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
144 1.1 wdk pseudo-device tun 4 # Network "tunnel" device
145 1.1 wdk #pseudo-device gre 2 # generic L3 over IP tunnel
146 1.1 wdk pseudo-device bpfilter 16 # Berkeley Packet Filter
147 1.1 wdk #pseudo-device vnd 4 # disk-like interface to files
148 1.1 wdk #pseudo-device ccd 4 # concatenated and striped disks
149 1.15 oster #pseudo-device raid 8 # RAIDframe disk driver
150 1.15 oster # Options to enable various other RAIDframe RAID types.
151 1.15 oster # options RF_INCLUDE_EVENODD=1
152 1.15 oster # options RF_INCLUDE_RAID5_RS=1
153 1.15 oster # options RF_INCLUDE_PARITYLOGGING=1
154 1.15 oster # options RF_INCLUDE_CHAINDECLUSTER=1
155 1.15 oster # options RF_INCLUDE_INTERDECLUSTER=1
156 1.15 oster # options RF_INCLUDE_PARITY_DECLUSTERING=1
157 1.15 oster # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
158 1.1 wdk #pseudo-device strip 1 # radio clock
159 1.1 wdk #pseudo-device ipfilter # ip filter
160 1.4 bouyer pseudo-device vlan # IEEE 802.1q encapsulation
161 1.12 atatat pseudo-device bridge # simple inter-network bridging
162 1.19 lukem pseudo-device clockctl # user control of clock subsystem
163 1.3 itojun
164 1.3 itojun # random number generator pseudo-device
165 1.3 itojun pseudo-device rnd # /dev/random and in-kernel generator
166 1.3 itojun #options RND_COM # use "com" randomness as well (BROKEN)
167