xref: /src/sys/arch/mmeye/conf/GENERIC

#	$NetBSD: GENERIC,v 1.6 2000/01/20 19:12:32 wrstuden Exp $
#
#	GENERIC -- everything that's currently supported
#

include "arch/mmeye/conf/std.mmeye"

maxusers	16		# estimated number of users

# CPU support
options 	SH7708R		# 100MHz
options 	MMEYE
options 	MMEYE_NEW_INT
#options 	MMEYE_NO_CACHE
options		PCLOCK=33330000		# 33.33MHz
options		INITTODR_ALWAYS_USE_RTC

# Standard system options
#options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
#options 	INSECURE	# disable kernel security levels

options 	HZ=50		# clock interrupt generates every 1/HZ sec
options 	NTP		# NTP phase/frequency locked loop
options 	KTRACE		# system call tracing via ktrace(1)

#options 	PMAP_NEW	# new pmap interface

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default

#options 	LKM		# loadable kernel modules

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
#options 	DDB		# in-kernel debugger
#options 	SYSCALL_DEBUG
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_13	# NetBSD 1.3
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_43	# and 4.3BSD

# Executable format options
options 	EXEC_COFF	# COFF executables
options 	EXEC_ELF32	# 32-bit ELF executables

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system
file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independant support
#options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.
# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support

options 	NFS_BOOT_DHCP	# Support DHCP NFS root

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
#options 	USBVERBOSE	# verbose USB device autoconfig messages

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?

#
# Device configuration
#

mainbus0 at root

shb*	at mainbus?

com0	at shb? port 0xa4000000 irq 11
com1	at shb? port 0xa4000008 irq 12

# SH PCMCIA controllers
shpcic0	at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x4000000
shpcic1	at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x4000000

# PCMCIA bus support
pcmcia*	at shpcic? controller ? socket ?

com*	at pcmcia? function ?		# Modems and serial cards
wdc*	at pcmcia? function ?
wd*	at wdc? drive ?			# the drives themselves

ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
sm*	at pcmcia? function ?		# Megahertz Ethernet

# Pseudo-Devices

pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	raid		4	# RAIDframe disk driver
pseudo-device	vnd		4	# disk-like interface to files
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
pseudo-device	sl		2	# Serial Line IP
pseudo-device	strip		2	# Starmode Radio IP (Metricom)
pseudo-device	tun		2	# network tunneling over tty
pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
pseudo-device	pty		16	# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
pseudo-device	vcoda		4	# coda minicache <-> venus comm.
#pseudo-device	md		1	# memory disk device (ramdisk)

# Enable the hooks used for initializing the root memory-disk.
#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
#options 	MINIROOTSIZE=3074	# size of memory disk, in blocks