Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.29
      1 # $NetBSD: GENERIC,v 1.29 2001/12/14 05:34:49 gmcgarry Exp $
      2 #
      3 # GENERIC machine description file
      4 # 
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 include 	"arch/mmeye/conf/std.mmeye"
     22 
     23 #ident 		"GENERIC-$Revision: 1.29 $"
     24 
     25 maxusers	16		# estimated number of users
     26 
     27 # CPU support
     28 options 	SH7708R		# 100MHz
     29 options 	MMEYE
     30 options 	MMEYE_NEW_INT
     31 #options 	MMEYE_NO_CACHE
     32 options 	PCLOCK=33330000		# 33.33MHz
     33 options 	INITTODR_ALWAYS_USE_RTC
     34 
     35 # Standard system options
     36 #options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
     37 #options 	INSECURE	# disable kernel security levels
     38 
     39 options 	HZ=50		# clock interrupt generates every 1/HZ sec
     40 options 	NTP		# NTP phase/frequency locked loop
     41 options 	KTRACE		# system call tracing via ktrace(1)
     42 
     43 options 	SYSVMSG		# System V-like message queues
     44 options 	SYSVSEM		# System V-like semaphores
     45 #options 	SEMMNI=10	# number of semaphore identifiers
     46 #options 	SEMMNS=60	# number of semaphores in system
     47 #options 	SEMUME=10	# max number of undo entries per process
     48 #options 	SEMMNU=30	# number of undo structures in system
     49 options 	SYSVSHM		# System V-like memory sharing
     50 #options 	SHMMAXPGS=1024	# 1024 pages is the default
     51 
     52 #options 	LKM		# loadable kernel modules
     53 
     54 # Diagnostic/debugging support options
     55 #options 	DIAGNOSTIC	# cheap kernel consistency checks
     56 #options 	DEBUG		# expensive debugging checks/support
     57 #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     58 #options 	DDB		# in-kernel debugger
     59 #options 	SYSCALL_DEBUG
     60 #makeoptions	DEBUG="-g"	# compile full symbol table
     61 
     62 # Compatibility options
     63 options 	COMPAT_13	# NetBSD 1.3
     64 options 	COMPAT_14	# NetBSD 1.4,
     65 options 	COMPAT_43	# and 4.3BSD
     66 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     67 
     68 # Executable format options
     69 options 	EXEC_COFF	# COFF executables
     70 options 	EXEC_ELF32	# 32-bit ELF executables
     71 
     72 # File systems
     73 file-system 	FFS		# UFS
     74 file-system 	EXT2FS		# second extended file system (linux)
     75 file-system 	LFS		# log-structured file system
     76 file-system 	MFS		# memory file system
     77 file-system 	NFS		# Network File System client
     78 file-system 	CD9660		# ISO 9660 + Rock Ridge file system
     79 file-system 	MSDOSFS		# MS-DOS file system
     80 file-system 	FDESC		# /dev/fd
     81 file-system 	KERNFS		# /kern
     82 file-system 	NULLFS		# loopback file system
     83 file-system 	OVERLAY		# overlay file system
     84 file-system 	PORTAL		# portal filesystem (still experimental)
     85 file-system 	PROCFS		# /proc
     86 file-system 	UMAPFS		# NULLFS + uid and gid remapping
     87 file-system 	UNION		# union file system
     88 file-system	CODA		# Coda File System; also needs vcoda (below)
     89 
     90 # File system options
     91 #options 	QUOTA		# UFS quotas
     92 #options 	FFS_EI		# FFS Endian Independant support
     93 options 	SOFTDEP		# FFS soft updates support.
     94 options 	NFSSERVER	# Network File System server
     95 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
     96 				# immutable) behave as system flags.
     97 
     98 # Networking options
     99 #options 	GATEWAY		# packet forwarding
    100 options 	INET		# IP + ICMP + TCP + UDP
    101 options 	INET6		# IPV6
    102 #options 	IPSEC		# IP security
    103 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
    104 #options 	IPSEC_DEBUG	# debug for IP security
    105 #options 	MROUTING	# IP multicast routing
    106 #options 	NS		# XNS
    107 #options 	NSIP		# XNS tunneling over IP
    108 #options 	ISO,TPIP	# OSI
    109 #options 	EON		# OSI tunneling over IP
    110 #options 	CCITT,LLC,HDLC	# X.25
    111 #options 	NETATALK	# AppleTalk networking protocols
    112 #options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
    113 #options 	PPP_DEFLATE	# Deflate compression support for PPP
    114 #options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
    115 #options 	PFIL_HOOKS	# pfil(9) packet filter hooks
    116 #options 	IPFILTER_LOG	# ipmon(8) log support
    117 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    118 
    119 options 	NFS_BOOT_DHCP	# Support DHCP NFS root
    120 
    121 # These options enable verbose messages for several subsystems.
    122 # Warning, these may compile large string tables into the kernel!
    123 #options 	PCIVERBOSE	# verbose PCI device autoconfig messages
    124 #options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
    125 options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
    126 options 	SCSIVERBOSE	# human readable SCSI error messages
    127 #options 	USBVERBOSE	# verbose USB device autoconfig messages
    128 
    129 # Kernel root file system and dump configuration.
    130 config		netbsd	root on ? type ?
    131 
    132 #
    133 # Device configuration
    134 #
    135 
    136 mainbus0 at root
    137 
    138 shb*	at mainbus?
    139 
    140 # WatchDog Timer
    141 #wdog0 at shb? port 0xffffff84
    142 
    143 com0	at shb? port 0xa4000000 irq 11
    144 com1	at shb? port 0xa4000008 irq 12
    145 
    146 # SH PCMCIA controllers
    147 shpcic0	at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x1000000
    148 shpcic1	at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x1000000
    149 
    150 # PCMCIA bus support
    151 pcmcia*	at shpcic? controller ? socket ?
    152 
    153 com*	at pcmcia? function ?		# Modems and serial cards
    154 wdc*	at pcmcia? function ?
    155 wd*	at wdc? drive ?			# the drives themselves
    156 
    157 ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    158 mbe*	at pcmcia? function ?		# MB8696x based Ethernet
    159 ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
    160 sm*	at pcmcia? function ?		# Megahertz Ethernet
    161 
    162 # Pseudo-Devices
    163 
    164 pseudo-device	ccd		4	# concatenated/striped disk devices
    165 #pseudo-device	raid		4	# RAIDframe disk driver
    166 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    167 pseudo-device	vnd		4	# disk-like interface to files
    168 pseudo-device	bpfilter	8	# Berkeley packet filter
    169 pseudo-device	ipfilter		# IP filter (firewall) and NAT
    170 pseudo-device	loop			# network loopback
    171 pseudo-device	ppp		2	# Point-to-Point Protocol
    172 pseudo-device	sl		2	# Serial Line IP
    173 pseudo-device	strip		2	# Starmode Radio IP (Metricom)
    174 pseudo-device	tun		2	# network tunneling over tty
    175 pseudo-device	gre		2	# generic L3 over IP tunnel
    176 pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    177 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    178 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    179 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    180 pseudo-device	vlan			# IEEE 802.1q encapsulation
    181 pseudo-device	bridge			# simple inter-network bridging
    182 pseudo-device	pty			# pseudo-terminals
    183 pseudo-device	rnd			# /dev/random and in-kernel generator
    184 pseudo-device	vcoda		4	# coda minicache <-> venus comm.
    185 #pseudo-device	md		1	# memory disk device (ramdisk)
    186 
    187 # Enable the hooks used for initializing the root memory-disk.
    188 #options 	MEMORY_DISK_HOOKS
    189 #options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
    190 #options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
    191 #options 	MINIROOTSIZE=3074	# size of memory disk, in blocks
    192