MMEYE revision 1.13 1 # $NetBSD: MMEYE,v 1.13 2002/04/12 08:11:08 gmcgarry Exp $
2 #
3 # GENERIC -- everything that's currently supported
4 #
5
6 include "arch/mmeye/conf/std.mmeye"
7
8 maxusers 16 # estimated number of users
9
10 # CPU support
11 options SH3
12 options SH7708R # 100MHz
13 options MMEYE
14 options MMEYE_NEW_INT
15 #options MMEYE_NO_CACHE
16 options PCLOCK=33330000 # 33.33MHz
17 options INITTODR_ALWAYS_USE_RTC
18
19 # Standard system options
20 #options UCONSOLE # users can use TIOCCONS (for xconsole)
21 #options INSECURE # disable kernel security levels
22
23 options HZ=50 # clock interrupt generates every 1/HZ sec
24 #options NTP # NTP phase/frequency locked loop
25
26 options KTRACE # system call tracing via ktrace(1)
27
28 #options USERCONF # userconf(4) support
29 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
30
31 # Diagnostic/debugging support options
32 #options DIAGNOSTIC # cheap kernel consistency checks
33 #options DEBUG # expensive debugging checks/support
34 #options DDB # in-kernel debugger
35 #makeoptions DEBUG="-g" # compile full symbol table
36 #options SYSCALL_DEBUG
37
38 # Compatibility options
39 options COMPAT_13 # NetBSD 1.3
40 options COMPAT_14 # NetBSD 1.4,
41 options COMPAT_43 # and 4.3BSD
42
43 # Executable format options
44 options EXEC_COFF # COFF executables
45 options EXEC_ELF32 # 32-bit ELF executables
46
47 # File systems
48 file-system FFS # UFS
49 file-system MFS # memory file system
50 file-system NFS # Network File System client
51 file-system PROCFS # /proc
52
53 # Networking options
54 options INET # IP + ICMP + TCP + UDP
55 options NFS_BOOT_DHCP # Support DHCP NFS root
56
57 #options PCIVERBOSE # verbose PCI device autoconfig messages
58 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
59 options PCMCIAVERBOSE # verbose PCMCIA configuration messages
60
61 # Kernel root file system and dump configuration.
62 #config netbsd root on ? type nfs
63 config netbsd root on wd0a type ffs
64
65 #
66 # Device configuration
67 #
68
69 mainbus0 at root
70
71 shb* at mainbus?
72
73 # WatchDog Timer
74 wdog0 at shb? port 0xffffff84
75
76 com0 at shb? port 0xa4000000 irq 11
77 com1 at shb? port 0xa4000008 irq 12
78
79 # SH PCMCIA controllers
80 shpcic0 at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x1000000
81 shpcic1 at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x1000000
82
83 # PCMCIA bus support
84 pcmcia* at shpcic? controller ? socket ?
85
86 com* at pcmcia? function ? # Modems and serial cards
87 wdc* at pcmcia? function ?
88 wd* at wdc? drive ? # the drives themselves
89
90 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
91 mbe* at pcmcia? function ? # MB8696x based Ethernet
92 ne* at pcmcia? function ? # NE2000-compatible Ethernet
93 sm* at pcmcia? function ? # Megahertz Ethernet
94
95 pseudo-device vnd 4 # disk-like interface to files
96 #pseudo-device bpfilter 8 # Berkeley packet filter
97 #pseudo-device ipfilter # IP filter (firewall) and NAT
98 pseudo-device loop # network loopback
99 pseudo-device pty # pseudo-terminals
100
101 # Enable the hooks used for initializing the root memory-disk.
102 #options MEMORY_DISK_HOOKS
103 #options MEMORY_DISK_IS_ROOT # force root on memory disk
104 #options MEMORY_DISK_SERVER=0 # no userspace memory disk support
105 #options MEMORY_DISK_ROOT_SIZE=3074 # size of memory disk, in blocks
106
107 #pseudo-device md 1 # memory disk device (ramdisk)
108