xref: /src/sys/arch/mvme68k/include/vmparam.h

/*	$NetBSD: vmparam.h,v 1.8 1998/07/08 04:40:28 thorpej Exp $	*/

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1982, 1986, 1990, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: vmparam.h 1.16 91/01/18$
 *
 *	@(#)vmparam.h	8.2 (Berkeley) 4/19/94
 */

#ifndef _MVME68K_VMPARAM_H_
#define _MVME68K_VMPARAM_H_

/*
 * Machine dependent constants for MVME68K
 */

/*
 * USRTEXT is the start of the user text/data space, while USRSTACK
 * is the top (end) of the user stack.  LOWPAGES and HIGHPAGES are
 * the number of pages from the beginning of the P0 region to the
 * beginning of the text and from the beginning of the P1 region to the
 * beginning of the stack respectively.
 *
 * NOTE: the ONLY reason that HIGHPAGES is 0x100 instead of UPAGES (3)
 * is for HPUX compatibility.  Why??  Because HPUX's debuggers
 * have the user's stack hard-wired at FFF00000 for post-mortems,
 * and we must be compatible...
 */
#define	USRTEXT		8192			/* Must equal __LDPGSZ */
#define	USRSTACK	(-HIGHPAGES*NBPG)	/* Start of user stack */
#define	BTOPUSRSTACK	(0x100000-HIGHPAGES)	/* btop(USRSTACK) */
#define	P1PAGES		0x100000
#define	LOWPAGES	0
#define	HIGHPAGES	(0x100000/NBPG)

/*
 * Virtual memory related constants, all in bytes
 */
#ifndef MAXTSIZ
#define	MAXTSIZ		(8*1024*1024)		/* max text size */
#endif
#ifndef DFLDSIZ
#define	DFLDSIZ		(16*1024*1024)		/* initial data size limit */
#endif
#ifndef MAXDSIZ
#define	MAXDSIZ		(64*1024*1024)		/* max data size */
#endif
#ifndef	DFLSSIZ
#define	DFLSSIZ		(512*1024)		/* initial stack size limit */
#endif
#ifndef	MAXSSIZ
#define	MAXSSIZ		MAXDSIZ			/* max stack size */
#endif

/*
 * Sizes of the system and user portions of the system page table.
 */
/* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */
#define	SYSPTSIZE	(2 * NPTEPG)	/* 8mb */
#define	USRPTSIZE 	(1 * NPTEPG)	/* 4mb */

/*
 * PTEs for mapping user space into the kernel for phyio operations.
 * One page is enough to handle 4Mb of simultaneous raw IO operations.
 */
#ifndef USRIOSIZE
#define USRIOSIZE	(1 * NPTEPG)	/* 4mb */
#endif

/*
 * PTEs for system V style shared memory.
 * This is basically slop for kmempt which we actually allocate (malloc) from.
 */
#ifndef SHMMAXPGS
#define SHMMAXPGS	1024		/* 4mb */
#endif

/*
 * Boundary at which to place first MAPMEM segment if not explicitly
 * specified.  Should be a power of two.  This allows some slop for
 * the data segment to grow underneath the first mapped segment.
 */
#define MMSEG		0x200000

/*
 * The size of the clock loop.
 */
#define	LOOPPAGES	(maxfree - firstfree)

/*
 * The time for a process to be blocked before being very swappable.
 * This is a number of seconds which the system takes as being a non-trivial
 * amount of real time.  You probably shouldn't change this;
 * it is used in subtle ways (fractions and multiples of it are, that is, like
 * half of a ``long time'', almost a long time, etc.)
 * It is related to human patience and other factors which don't really
 * change over time.
 */
#define	MAXSLP 		20

/*
 * A swapped in process is given a small amount of core without being bothered
 * by the page replacement algorithm.  Basically this says that if you are
 * swapped in you deserve some resources.  We protect the last SAFERSS
 * pages against paging and will just swap you out rather than paging you.
 * Note that each process has at least UPAGES+CLSIZE pages which are not
 * paged anyways (this is currently 8+2=10 pages or 5k bytes), so this
 * number just means a swapped in process is given around 25k bytes.
 * Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81),
 * so we loan each swapped in process memory worth 100$, or just admit
 * that we don't consider it worthwhile and swap it out to disk which costs
 * $30/mb or about $0.75.
 * Update: memory prices have changed recently (9/96). At the current
 * value of $6 per megabyte, we lend each swapped in process memory worth
 * $0.15, or just admit that we don't consider it worthwhile and swap it out
 * to disk which costs $0.20/MB, or just under half a cent.
 */
#define	SAFERSS		4		/* nominal ``small'' resident set size
					   protected against replacement */

/*
 * DISKRPM is used to estimate the number of paging i/o operations
 * which one can expect from a single disk controller.
 */
#define	DISKRPM		60

/*
 * Klustering constants.  Klustering is the gathering
 * of pages together for pagein/pageout, while clustering
 * is the treatment of hardware page size as though it were
 * larger than it really is.
 *
 * KLMAX gives maximum cluster size in CLSIZE page (cluster-page)
 * units.  Note that ctod(KLMAX*CLSIZE) must be <= DMMIN in dmap.h.
 * ctob(KLMAX) should also be less than MAXPHYS (in vm_swp.c)
 * unless you like "big push" panics.
 */

#define	KLMAX	(4/CLSIZE)
#define	KLSEQL	(2/CLSIZE)		/* in klust if vadvise(VA_SEQL) */
#define	KLIN	(4/CLSIZE)		/* default data/stack in klust */
#define	KLTXT	(4/CLSIZE)		/* default text in klust */
#define	KLOUT	(4/CLSIZE)

/*
 * KLSDIST is the advance or retard of the fifo reclaim for sequential
 * processes data space.
 */
#define	KLSDIST	3		/* klusters advance/retard for seq. fifo */

/*
 * Paging thresholds (see vm_sched.c).
 * Strategy of 1/19/85:
 *	lotsfree is 512k bytes, but at most 1/4 of memory
 *	desfree is 200k bytes, but at most 1/8 of memory
 */
#define	LOTSFREE	(512 * 1024)
#define	LOTSFREEFRACT	4
#define	DESFREE		(200 * 1024)
#define	DESFREEFRACT	8

/*
 * There are two clock hands, initially separated by HANDSPREAD bytes
 * (but at most all of user memory).  The amount of time to reclaim
 * a page once the pageout process examines it increases with this
 * distance and decreases as the scan rate rises.
 */
#define	HANDSPREAD	(2 * 1024 * 1024)

/*
 * The number of times per second to recompute the desired paging rate
 * and poke the pagedaemon.
 */
#define	RATETOSCHEDPAGING	4

/*
 * Believed threshold (in megabytes) for which interleaved
 * swapping area is desirable.
 */
#define	LOTSOFMEM	2

/*
 * Mach derived constants
 */

/* user/kernel map constants */
#define VM_MIN_ADDRESS		((vm_offset_t)0)
#define VM_MAXUSER_ADDRESS	((vm_offset_t)0xFFF00000)
#define VM_MAX_ADDRESS		((vm_offset_t)0xFFF00000)
#define VM_MIN_KERNEL_ADDRESS	((vm_offset_t)0)
#define VM_MAX_KERNEL_ADDRESS	((vm_offset_t)0xFFFFF000)

/* virtual sizes (bytes) for various kernel submaps */
#define VM_MBUF_SIZE		(NMBCLUSTERS*MCLBYTES)
#define VM_KMEM_SIZE		(NKMEMCLUSTERS*CLBYTES)
#define VM_PHYS_SIZE		(USRIOSIZE*CLBYTES)

/* # of kernel PT pages (initial only, can grow dynamically) */
#define VM_KERNEL_PT_PAGES	((vm_size_t)2)		/* XXX: SYSPTSIZE */

/* pcb base */
#define	pcbb(p)		((u_int)(p)->p_addr)

/* Use new VM page bootstrap interface. */
#define MACHINE_NEW_NONCONTIG

/*
 * Constants which control the way the VM system deals with memory segments.
 * The mvme68k port has two physical memory segments: 1 for onboard RAM
 * and another for contiguous VMEbus RAM.
 */
#define	VM_PHYSSEG_MAX		2
#define	VM_PHYSSEG_STRAT	VM_PSTRAT_RANDOM
#define	VM_PHYSSEG_NOADD

#define	VM_NFREELIST		2
#define	VM_FREELIST_DEFAULT	0
#define	VM_FREELIST_VMEMEM	1

/*
 * pmap-specific data stored in the vm_physmem[] array.
 */
struct pmap_physseg {
	struct pv_entry *pvent;		/* pv table for this seg */
	char *attrs;			/* page attributes for this seg */
};

#endif /* _MVME68K_VMPARAM_H_ */