GENERIC revision 1.117 1 # $NetBSD: GENERIC,v 1.117 2013/04/27 18:19:46 christos Exp $
2 #
3 # GENERIC machine description file
4 #
5 # This machine description file is used to generate the default NetBSD
6 # kernel. The generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
8 #
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
11 #
12 # For further information on compiling NetBSD kernels, see the config(8)
13 # man page.
14 #
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
19 # device.
20
21 include "arch/netwinder/conf/std.netwinder"
22
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25 # estimated number of users
26
27 maxusers 32
28
29 # Standard system options
30
31 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
32 #options NTP # NTP phase/frequency locked loop
33
34 # Enable experimental buffer queue strategy for better responsiveness under
35 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
36 #options BUFQ_READPRIO
37 #options BUFQ_PRIOCSCAN
38
39 # CPU options
40
41 # For StrongARM systems
42 options CPU_SA110 # Support the SA110 core
43 makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm"
44
45 # Default console is wscons, if igsfb(4) and pckbc(4) are configured,
46 # or com(4) otherwise. You can force a serial console with these options
47 #options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200
48
49
50 # File systems
51
52 file-system FFS # UFS
53 #file-system LFS # log-structured file system
54 file-system MFS # memory file system
55 file-system NFS # Network file system
56 #file-system ADOSFS # AmigaDOS-compatible file system
57 file-system EXT2FS # second extended file system (linux)
58 #file-system CD9660 # ISO 9660 + Rock Ridge file system
59 file-system MSDOSFS # MS-DOS file system
60 file-system FDESC # /dev/fd
61 file-system KERNFS # /kern
62 file-system NULLFS # loopback file system
63 file-system PROCFS # /proc
64 #file-system UMAPFS # NULLFS + uid and gid remapping
65 #file-system UNION # union file system
66 file-system PTYFS # /dev/pts/N support
67 file-system TMPFS # Efficient memory file-system
68 #file-system UDF # experimental - OSTA UDF CD/DVD file-system
69
70 # File system options
71 #options QUOTA # legacy UFS quotas
72 #options QUOTA2 # new, in-filesystem UFS quotas
73 #options FFS_EI # FFS Endian Independent support
74 #options FFS_NO_SNAPSHOT # No FFS snapshot support
75 options NFSSERVER
76 options WAPBL # File system journaling support
77 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
78
79 # Networking options
80
81 #options GATEWAY # packet forwarding
82 options INET # IP + ICMP + TCP + UDP
83 options INET6 # IPV6
84 #options IPSEC # IP security
85 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
86 #options IPSEC_DEBUG # debug for IP security
87 #options MROUTING # IP multicast routing
88 #options PIM # Protocol Independent Multicast
89 #options NETATALK # AppleTalk networking
90 #options PFIL_HOOKS # pfil(9) packet filter hooks
91 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
92 #options PPP_DEFLATE # Deflate compression support for PPP
93 #options PPP_FILTER # Active filter support for PPP (requires bpf)
94 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
95
96 #options ALTQ # Manipulate network interfaces' output queues
97 #options ALTQ_BLUE # Stochastic Fair Blue
98 #options ALTQ_CBQ # Class-Based Queueing
99 #options ALTQ_CDNR # Diffserv Traffic Conditioner
100 #options ALTQ_FIFOQ # First-In First-Out Queue
101 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
102 #options ALTQ_HFSC # Hierarchical Fair Service Curve
103 #options ALTQ_LOCALQ # Local queueing discipline
104 #options ALTQ_PRIQ # Priority Queueing
105 #options ALTQ_RED # Random Early Detection
106 #options ALTQ_RIO # RED with IN/OUT
107 #options ALTQ_WFQ # Weighted Fair Queueing
108
109 options NFS_BOOT_BOOTP
110 options NFS_BOOT_DHCP
111 #options NFS_BOOT_BOOTPARAM
112
113 # Compatibility options
114
115 #options COMPAT_43 # 4.3BSD compatibility.
116 options COMPAT_60 # NetBSD 6.0 compatibility.
117 options COMPAT_50 # NetBSD 5.0 compatibility.
118 options COMPAT_40 # NetBSD 4.0 compatibility.
119 options COMPAT_30 # NetBSD 3.0 compatibility.
120 options COMPAT_20 # NetBSD 2.0 compatibility.
121 options COMPAT_16 # NetBSD 1.6 compatibility.
122 options COMPAT_15 # NetBSD 1.5 compatibility.
123 options COMPAT_14 # NetBSD 1.4 compatibility.
124 #options COMPAT_13 # NetBSD 1.3 compatibility.
125 #options COMPAT_12 # NetBSD 1.2 compatibility.
126 #options COMPAT_11 # NetBSD 1.1 compatibility.
127 #options COMPAT_10 # NetBSD 1.0 compatibility.
128 #options COMPAT_09 # NetBSD 0.9 compatibility.
129 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
130
131 options COMPAT_LINUX # binary compatibility with Linux
132 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
133
134 # Shared memory options
135
136 options SYSVMSG # System V-like message queues
137 options SYSVSEM # System V-like semaphores
138 options SYSVSHM # System V-like memory sharing
139
140 # Device options
141
142 #options MEMORY_DISK_HOOKS # boottime setup of ramdisk
143 #options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
144 #options MEMORY_DISK_IS_ROOT # use memory disk as root
145
146 # Miscellaneous kernel options
147 options KTRACE # system call tracing, a la ktrace(1)
148 options IRQSTATS # manage IRQ statistics
149 #options KMEMSTATS # kernel memory statistics
150 #options SCSIVERBOSE # Verbose SCSI errors
151 options PCIVERBOSE # Verbose PCI descriptions
152 options MIIVERBOSE # Verbose MII autoconfuration messages
153 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
154 #options DDB_KEYCODE=0x40
155 options USERCONF # userconf(4) support
156 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
157 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
158
159 # Development and Debugging options
160
161 #options ARM700BUGTRACK # track the ARM700 swi bug
162 #options PORTMASTER # Enable PortMaster only options
163 #options DIAGNOSTIC # internal consistency checks
164 #options PMAP_DEBUG # Enable pmap_debug_level code
165 options DDB # in-kernel debugger
166 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
167 makeoptions DEBUG="-g" # compile full symbol table
168 options SYMTAB_SPACE=650000
169
170 config netbsd root on ? type ?
171
172 # The main bus device
173 mainbus0 at root
174
175 # The boot CPU
176 cpu0 at mainbus?
177
178 # Core logic
179 footbridge0 at mainbus?
180
181 # footbridge uart
182 #fcom0 at footbridge?
183
184 # system clock via footbridge
185 #clock* at footbridge?
186
187 # PCI bus via footbridge
188 pci0 at footbridge? # PCI bus
189
190 # ISA bus support
191 pcib* at pci? dev ? function ? # ISA bridge
192 isa* at pcib?
193
194
195 # PCI IDE Controllers and Devices
196 # PCI IDE controllers - see pciide(4) for supported hardware.
197 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
198 # how to set up DMA modes for this chip. This may work, or may cause
199 # a machine hang with some controllers.
200 #pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
201 slide* at pci? dev ? function ? # Symphony Labs IDE controllers
202
203 # ATA (IDE) bus support
204 atabus* at ata?
205
206 # IDE drives
207 # Flags are used only with controllers that support DMA operations
208 # and mode settings (e.g. some pciide controllers)
209 # The lowest order four bits (rightmost digit) of the flags define the PIO
210 # mode to use, the next set of four bits the DMA mode and the third set the
211 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
212 # to use, and the last bit must be 1 for this setting to be used.
213 # For DMA and UDMA, 0xf (1111) means 'disable'.
214 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
215 # (0xc=1100, 0xa=1010, 0xf=1111)
216 # 0x0000 means "use whatever the drive claims to support".
217 wd* at atabus? drive ? flags 0x0000 # the drives themselves
218
219 # PCI network interfaces
220 ne* at pci? dev ? function ? # NE2000 compat ethernet
221 tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
222 options TLP_MATCH_21142
223
224 # MII/PHY support
225 icsphy* at mii? phy ? # ISC-189x PHYs
226 ukphy* at mii? phy ? # generic unknown PHYs
227
228
229 # WSCONS Support
230 options WSEMUL_VT100 # VT100 / VT220 emulation
231
232 # customization of console and kernel output - see dev/wscons/wsdisplayvar.h
233 options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
234 #options WS_DEFAULT_FG=WSCOL_WHITE
235 #options WS_DEFAULT_BG=WSCOL_BLACK
236 #options WS_DEFAULT_COLATTR="(0)"
237 #options WS_DEFAULT_MONOATTR="(0)"
238 options WS_KERNEL_FG=WSCOL_GREEN
239 #options WS_KERNEL_BG=WSCOL_BLACK
240 options WS_KERNEL_COLATTR=WSATTR_HILIT
241 #options WS_KERNEL_MONOATTR="(0)"
242
243 # compatibility to other console drivers
244 options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
245 options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
246 options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
247 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
248
249 options FONT_GALLANT12x22 # Sun PROM font look-alike
250
251 pckbc0 at isa?
252 pckbd* at pckbc?
253 wskbd* at pckbd? console ?
254 pms* at pckbc?
255 wsmouse* at pms? mux 0
256
257 igsfb* at pci? dev ? function ?
258 wsdisplay* at igsfb? console ?
259
260
261 # ISA Devices
262 com0 at isa? port 0x3f8 irq 4
263 lpt0 at isa? port 0x378 irq 7
264
265
266 # Audio Devices
267
268 # ISA audio devices
269 sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster
270 opl* at sb?
271 mpu* at sb?
272 midi* at sb? # SB1 MIDI port
273
274 # Audio support
275 audio* at sb?
276
277 # Pseudo-Devices
278
279 pseudo-device crypto # /dev/crypto device
280 pseudo-device swcrypto # software crypto implementation
281
282 # disk/mass storage pseudo-devices
283 #pseudo-device md # memory disk device (ramdisk)
284 pseudo-device vnd # disk-like interface to files
285 #options VND_COMPRESSION # compressed vnd(4)
286 pseudo-device fss # file system snapshot device
287 #pseudo-device cgd # cryptographic disk devices
288
289 # network pseudo-devices
290 pseudo-device bpfilter # Berkeley packet filter
291 #pseudo-device carp # Common Address Redundancy Protocol
292 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
293 pseudo-device bridge # simple inter-network bridging
294 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
295 pseudo-device loop # network loopback
296
297 #
298 # accept filters
299 pseudo-device accf_data # "dataready" accept filter
300 pseudo-device accf_http # "httpready" accept filter
301
302 # miscellaneous pseudo-devices
303 pseudo-device pty # pseudo-terminals
304 pseudo-device clockctl # user control of clock subsystem
305 pseudo-device ksyms # /dev/ksyms
306 #pseudo-device pf # PF packet filter
307 #pseudo-device pflog # PF log if
308
309 # wscons pseudo-devices
310 pseudo-device wsmux # mouse & keyboard multiplexor
311 #pseudo-device wsfont
312
313 # Veriexec
314 #
315 # a pseudo device needed for veriexec
316 #pseudo-device veriexec 1
317 #
318 # Uncomment the fingerprint methods below that are desired. Note that
319 # removing fingerprint methods will have almost no impact on the kernel
320 # code size.
321 #
322 #options VERIFIED_EXEC_FP_RMD160
323 #options VERIFIED_EXEC_FP_SHA256
324 #options VERIFIED_EXEC_FP_SHA384
325 #options VERIFIED_EXEC_FP_SHA512
326 #options VERIFIED_EXEC_FP_SHA1
327 #options VERIFIED_EXEC_FP_MD5
328